Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
8,234 free GLB models
AnimatedSwarf bin on wheels (Machine Shop and Factory Hall)
Charcoal two wheeled bin 0.72 m wide filled with steel turnings, its lid hinged along the back edge and a yellow swarf notice on the front.
Oil drum on a tipping stand with a tap (Machine Shop and Factory Hall)
Two hundred litre blue drum lying in a charcoal cradle stand with a brass coloured tap and a drip tray beneath, for cutting oil at the machines.
Two shelf workshop trolley (Machine Shop and Factory Hall)
Wheeled steel trolley 0.9 m long with two charcoal shelves, a push handle and four castors, carrying a tray of finished parts.
Parts bin shelving with plastic bins (Machine Shop and Factory Hall)
Blue shelving 1.2 m wide and 1.9 m tall carrying four rows of open fronted cream and blue picking bins, with a written card on the end frame.
Pegboard tool wall on a stand (Machine Shop and Factory Hall)
Free standing pegboard 2 m wide and 1.9 m tall holding spanners, files, hammers and a hand drill on hooks, with a small shelf of tins along the bottom.
AnimatedBench top tool chest (Machine Shop and Factory Hall)
Blue bench chest 0.6 m wide with a lifting lid section and four small drawers, sitting on any bench or the top of the roller cabinet.
AnimatedWorkbench with engineer's vice (Machine Shop and Factory Hall)
Two metre workbench: a timber top on a charcoal frame with a lower shelf, a cast engineer's vice at one end whose moving jaw opens, and hand tools laid on the top.
AnimatedMobile tool cabinet with drawers (Machine Shop and Factory Hall)
Blue roller cabinet on castors with a charcoal worktop and five drawers, 0.9 m wide, the top drawer opening on its runners to show the tray behind the front.
Sheet metal storage rack (Machine Shop and Factory Hall)
Vertical sheet rack with charcoal dividers holding steel and cast sheet on edge, 2.0 m wide and 1.8 m tall, with a yellow kerb along the front.
Pallet of stacked cartons (Machine Shop and Factory Hall)
Timber pallet stacked with six cream cartons under a charcoal strapping band, 1.2 m by 1.0 m by 1.1 m tall.
Cantilever bar stock rack (Machine Shop and Factory Hall)
Vertical cantilever rack 2.4 m tall holding long round, square and angle bar on four levels of blue arms, with a yellow foot bar and a load notice.
Pallet of steel bar stock (Machine Shop and Factory Hall)
Standard timber pallet loaded with a bundle of bright round and square bar banded together, 1.2 m by 1.0 m and ready for the racking or the forks.
Pallet racking bay, two levels (Machine Shop and Factory Hall)
Adjustable pallet racking 2.7 m wide and 3.6 m tall: blue uprights with bracing, two levels of yellow load beams and timber deck boards ready for pallets.
AnimatedPiston air compressor with receiver tank (Machine Shop and Factory Hall)
Belt driven compressor on a horizontal receiver: dished tank ends on saddle feet, a sage enamel motor and finned twin cylinder pump, a yellow belt guard, two gauges, a pressure switch and a flywheel that spins.
AnimatedParts washing cabinet with lift lid (Machine Shop and Factory Hall)
Solvent parts washer: an enamelled cabinet on rubber feet with a drum shelf below, a cast basin with a drain and a flexible nozzle on a gooseneck, a brush on the rim and a lid that lifts on its back edge.
AnimatedPowder coating oven with hinged door (Machine Shop and Factory Hall)
Batch curing oven: a light grey insulated cabinet 2.1 m tall with charcoal corner trim, a burner box and flue on the roof, a controller with a cream setpoint display and knobs, and a full height door that swings open on hinges.
Welding screen on castors (Machine Shop and Factory Hall)
Three panel welding screen on a castored frame: a charcoal tube frame with red curtain panels hung on rings, standing 1.9 m tall and shielding a welding bay from the shop floor.
MIG welder on a bottle cart (Machine Shop and Factory Hall)
Wheeled welding cart: an enamelled MIG set with a cream label panel, knobs and a wire spool door, a shielding gas bottle chained upright with its regulator, a coiled torch and earth lead, and a tray of consumables underneath.
Welding table with clamps (Machine Shop and Factory Hall)
Heavy welding bench: a charcoal steel top with a fixturing hole grid on square legs, three toggle clamps, an earth clamp on its lead, a lower shelf of offcuts and levelling feet.
AnimatedAbrasive cut-off saw (Machine Shop and Factory Hall)
Cut-off saw on an enamelled stand: a cast table with a quick action vice and a bar stop, a charcoal blade guard, a motor head with a pull handle and a wheel that spins.
AnimatedLinisher belt sander on a stand (Machine Shop and Factory Hall)
Belt linisher on an enamelled stand: a charcoal abrasive belt over a flat platen, an adjustable steel work rest, a dust port and hood, a tracking knob and a drive drum that turns.
AnimatedSheet metal guillotine shear (Machine Shop and Factory Hall)
Two metre guillotine: an enamelled frame with a cast table on bright ways, hold down feet, a yellow finger guard, a back gauge on screws, a foot pedal and a blade beam that comes down across the table.
AnimatedCNC machining centre with sliding door (Machine Shop and Factory Hall)
Enclosed three axis machining centre: a chamfered base, a light grey guarding enclosure with a glazed sliding door on a bottom track, a swarf conveyor, a three colour stack light and a control pendant with a keyboard on a swing arm.
AnimatedPress brake for sheet metal (Machine Shop and Factory Hall)
Two metre press brake: enamelled side housings, a cast bed carrying a vee die, a back gauge on screws, a yellow finger guard, a foot pedal and a ram with a bright punch that comes down on the die.