Free models · Game-ready GLB
Buildings
Every stylized building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
495 free GLB models
Station Canopy Section (Bus Station and City Transit)
A 6 m bay of station canopy: a pair of 5.15 m steel columns on the platform centreline, a head beam, a 7.5 m deck cantilevered over the platform edges, blue ribs across it and a blue fascia down both sides. Bays butt into a canopy of any length.
AnimatedSite Office Portacabin (Wind and Solar Energy Farm)
A 6.4 m site office portacabin: a white unit with a yellow waistband, three glazed windows, a step up to the door and a fire point plate, for the people who run the farm.
AnimatedBattery Storage Container (Wind and Solar Energy Farm)
A 6 m battery energy storage container: a corrugated white unit with a side mounted cooling pack, fire and hazard plates and two end doors on their own hinges.
AnimatedControl Cabin Unit (Wind and Solar Energy Farm)
The site control cabin: a 4 m walk in kiosk with a yellow eaves band, a ventilation grille, a fire point plate, a step at the door and a single leaf that swings open.
AnimatedVertical Axis Wind Turbine (Wind and Solar Energy Farm)
A 5 m vertical axis wind turbine on a cast base: three straight white aerofoil blades held off a steel spindle by struts, turning about the mast. The machine for a yard or a roof where a rotor cannot go.
AnimatedTurbine Access Door Panel (Wind and Solar Energy Farm)
The access door panel from a turbine tower base: a white wall section with a steel canopy, warning plates and a grey steel leaf that swings open on its own hinge node.
AnimatedWind Turbine Tower (Wind and Solar Energy Farm)
A three blade utility wind turbine: a 28 m tapered white tower on a base collar, a nacelle with its yaw ring and cooling face, and a 24 m rotor that turns about the nacelle axis.
AnimatedFarm Scale Wind Turbine (Wind and Solar Energy Farm)
A farm scale three blade turbine, 12.5 m to the hub with an 11 m rotor: the machine a single farm, depot or island grid runs, at about half the tower of the utility model.
Ticket Kiosk (Baseball Park and Batting Cages)
A 2.4 m square concession and ticket kiosk 2.8 m tall: a navy box with a white counter under a red awning, a steel framed serving window and a blank board on the back.
Batting Cage Frame (Baseball Park and Batting Cages)
An 8 by 3.6 m batting cage 3.2 m high: a steel frame netted on both sides, over the top and across the closed end, with a padded back board and navy skirts, open at the hitter end.
Bleacher Stand (Baseball Park and Batting Cages)
A 6.2 m five row bleacher: timber benches and backs on a raked steel frame with side rails and a navy hoarding across the top row, for the crowd behind the plate.
AnimatedDugout Unit (Baseball Park and Batting Cages)
A 4 m dugout unit: a concrete pad, a navy back wall under a charcoal roof, a slatted bench with a helmet shelf under it and a front railing with a gate that swings onto the field.
Backstop Fence Panel (Baseball Park and Batting Cages)
A 3 m bay of 4.2 m backstop fencing: charcoal posts and rails, steel mesh and a navy padded kick plate, the wall that keeps a foul ball out of the seats.
AnimatedBackstop Gate Panel (Baseball Park and Batting Cages)
A 3 m backstop bay with a 2.2 m mesh gate in it: the same posts and rails as the plain bay, mesh light over the head and a single leaf that swings out of the field.
Outfield Wall Corner (Baseball Park and Batting Cages)
The right angle return for the outfield wall: two padded arms meeting in the corner where the wall turns up the foul line, on the same ports and section as the straight bay.
Outfield Wall Panel (Baseball Park and Batting Cages)
A 4 m bay of outfield wall 2.5 m high: a charcoal carcass on a footing, navy padding across the whole field face with the white home run line over it, and two back pilasters.
AnimatedPark Gate with Brick Piers (City Park and Playground)
A 3.1 m park entrance: two banded piers with capped pyramid tops and a pair of spear top iron leaves hung on their inner faces. Each leaf is its own node on its own pier, so the pair opens outward together.
Timber Pergola (City Park and Playground)
A 3.6 x 2.4 m pergola: four posts, two head beams, eight rafters and a bench board on each side, with a climbing plant over both ends. Static.
Hexagonal Park Bandstand (City Park and Playground)
A 5.8 m hexagonal bandstand: a raised paved plinth with a timber deck, six posts with blue balustrades between five of them, three steps up to the open bay and a red conical roof with a finial. Static.
AnimatedPark Refreshment Kiosk (City Park and Playground)
A 3 x 2.2 m park kiosk: a blue block with a red stall riser, a timber serving counter, a menu board and a red parapet roof. The steel shutter over the hatch is one node on its head, so the clip lifts it out as an awning.
Play Tower with Roof and Ladder (City Park and Playground)
A 2.5 m timber play tower: a 1.9 m square deck at 1.3 m inside blue guard panels, a five rung ladder up the open side and a red gabled roof on the four posts. Static.
Clubhouse Roof Slope (Tennis Club and Courts)
One 4 m bay of clubhouse roof: a charcoal slab that seats on the wall head at its eave edge and climbs 1.8 m over a 3 m run to the ridge, with standing seams picked out along it.
Clubhouse Ridge Cap (Tennis Club and Courts)
A 4 m ridge cap in clay red, 0.6 m across and cut to the roof pitch, so it closes the joint where two slopes meet without reading as a slope of its own.
Clubhouse Gable End (Tennis Club and Courts)
The 6 m gable end that closes a clubhouse run: a rendered wall to the head, the gable above it cut to the roof pitch and a square window under the apex.