Free models · Game-ready GLB
Buildings
Every modern building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
1,471 free GLB models
Stage (Casino Floor and Back Rooms)
Low panelled performance stage with an edge strip and steps.
Back Bar (Casino Floor and Back Rooms)
Mirrored back bar with three glass shelves of bottles.
Bar Counter (Casino Floor and Back Rooms)
Panelled bar counter with a stone top and a foot rail.
Mirrored Wall (Casino Floor and Back Rooms)
Wall bay of three mirror panels in a brass-mullioned frame.
Casino Column (Casino Floor and Back Rooms)
Round floor column with brass reeding and a moulded cap.
Ceiling Coffer (Casino Floor and Back Rooms)
Recessed ceiling coffer with a gilt band and four downlights.
Casino Carpet Tile (Casino Floor and Back Rooms)
Four-metre patterned carpet tile in red and gold.
Servery counter end module (Office Lobby and Building Facilities)
A 600 mm servery counter end module closing a run, with a stainless return panel and a rounded corner post on the open end.
Servery counter module, 600 mm (Office Lobby and Building Facilities)
A 600 mm servery counter module at 900 mm and 700 mm deep: a stainless body on a recessed plinth, a bullnose top, an under-counter shelf, a three-bracket tray slide and an accent front band.
Plant room air handling unit (Office Lobby and Building Facilities)
A 2.4 m by 1.5 m plant room air handling unit 1.0 m deep: a sectional casing on an anti-vibration base with three access doors, latches and hinges, a filter sight glass, a fan inspection window, a control panel, two flanged duct spigots and a condensate drain.
Raised access floor tile, lifted (Office Lobby and Building Facilities)
The same raised floor bay with the tile lifted through twenty-four degrees on its edge as a named pivoted node, and a twin-cup suction lifter resting on it.
Cable ladder bend (Office Lobby and Building Facilities)
A 1.2 m cable ladder right-angle bend: swept outer and inner rails top and bottom on vertical posts, fanned rungs through the turn and splice plates on both openings.
Raised access floor tile (Office Lobby and Building Facilities)
A 600 mm raised access floor tile on four adjustable pedestals at 150 mm: threaded pedestal heads, stringer rails and a chamfered tile with a wear layer.
Cable ladder run, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m cable ladder run 450 mm wide: two chamfered side rails on 100 mm sections with five rungs, splice plates at both ends and two drop rod brackets.
UPS cabinet (Office Lobby and Building Facilities)
A 0.6 m by 1.85 m UPS cabinet 0.85 m deep: a chamfered case on a plinth with a control display and four indicator lamps, four battery drawer fronts with pull rails and a rear extract grille.
In-row cooling unit (Office Lobby and Building Facilities)
A 300 mm in-row cooling unit on the 2.0 m rack line: a rack-format frame with a full-height louvred front, three fan assemblies, a control display and chilled water pipework rising at the rear.
Animated42U server rack with mesh doors (Office Lobby and Building Facilities)
The same 42U rack fitted with perforated mesh doors front and rear, each a named node pivoted on its hinge edge with a swing handle.
42U server rack, open frame (Office Lobby and Building Facilities)
A 600 mm by 1000 mm 42U server rack 2.0 m tall as an open frame: chamfered side stiles and a base plinth, four punched mounting rails, seven populated appliances with vent slots and status lamps, cable fingers, a management arm, a vertical power strip and levelling feet.
Tiled washroom wall module, 1 m (Office Lobby and Building Facilities)
A 1 m tiled washroom wall module 2.6 m tall and 100 mm thick: a chamfered leaf with a nine-course stretcher-bond tile field, an accent border tile band, skirtings both sides and a head trim.
Washroom wall corner (Office Lobby and Building Facilities)
A 100 mm washroom wall corner post 2.6 m tall turning a tiled run through ninety degrees, tiled on both exposed faces with a head trim and a skirting collar.
AnimatedAccessible WC cubicle module (Office Lobby and Building Facilities)
A 1.8 m by 2.0 m accessible WC cubicle module 2.0 m tall: a divider, a wide pilaster, a head rail, a duct panel with a flush plate, three grab rails, an alarm pull cord and a 900 mm outward-opening door with a pull rail as a named pivoted node.
AnimatedWC cubicle module, 900 mm (Office Lobby and Building Facilities)
A 900 mm WC cubicle module 2.0 m tall on 150 mm adjustable legs and 1.5 m deep: a divider panel, a front pilaster, a head rail, a rear duct panel with a flush plate and a service hatch, and a hinged door with an indicator bolt and a coat hook as a named pivoted node.
WC cubicle module, door open (Office Lobby and Building Facilities)
The same 900 mm WC cubicle module with the door swung inward through sixty-six degrees, showing the duct panel and flush plate inside.
Corridor ceiling module with air grille (Office Lobby and Building Facilities)
The same 1.2 m ceiling raft without the luminaire, closed with a plain tile and a four-way swirl supply grille.