Free models · Game-ready GLB
Buildings
Every modern building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
1,471 free GLB models
Backdrop LED Panel Module (Nightclub and DJ Booth)
A 1 m square LED video panel for the wall behind the booth: a cast frame 100 mm deep with a magenta diffuser face ribbed on the pixel pitch, and corner castings on all four edges so panels tile across and up.
Riser Platform Module (Nightclub and DJ Booth)
A 2 by 1 m stage riser at 400 mm: a dark non slip deck in an aluminium edge trim on a folding steel frame with levelling feet, ported on all four edges so risers tile into a booth stage of any size.
Backdrop LED Panel Module, Cyan (Nightclub and DJ Booth)
The 1 m backdrop LED panel with a cyan diffuser face, for chequering a video wall two ways so the backdrop reads as a pattern rather than a flat sheet.
DJ Booth Facade Panel (Nightclub and DJ Booth)
A 1.5 m facade section for the front of a booth or a riser: a framed dark panel with a recessed magenta light box behind a diffuser, aluminium rails top and bottom and stiles at both ends so sections butt into a continuous front.
Site Office Portacabin (Wind and Solar Energy Farm)
A 6.4 m site office portacabin: a white unit with a yellow waistband, three glazed windows, a step up to the door and a fire point plate, for the people who run the farm.
Battery Storage Container (Wind and Solar Energy Farm)
A 6 m battery energy storage container: a corrugated white unit with a side mounted cooling pack, fire and hazard plates and two end doors on their own hinges.
Control Cabin Unit (Wind and Solar Energy Farm)
The site control cabin: a 4 m walk in kiosk with a yellow eaves band, a ventilation grille, a fire point plate, a step at the door and a single leaf that swings open.
Vertical Axis Wind Turbine (Wind and Solar Energy Farm)
A 5 m vertical axis wind turbine on a cast base: three straight white aerofoil blades held off a steel spindle by struts, turning about the mast. The machine for a yard or a roof where a rotor cannot go.
Turbine Access Door Panel (Wind and Solar Energy Farm)
The access door panel from a turbine tower base: a white wall section with a steel canopy, warning plates and a grey steel leaf that swings open on its own hinge node.
Wind Turbine Tower (Wind and Solar Energy Farm)
A three blade utility wind turbine: a 28 m tapered white tower on a base collar, a nacelle with its yaw ring and cooling face, and a 24 m rotor that turns about the nacelle axis.
Farm Scale Wind Turbine (Wind and Solar Energy Farm)
A farm scale three blade turbine, 12.5 m to the hub with an 11 m rotor: the machine a single farm, depot or island grid runs, at about half the tower of the utility model.
Roller shutter door module, 4 m (Car Repair Garage and MOT Workshop)
Full height workshop entrance module: a 3.2 m by 3.2 m opening in a clad surround, charcoal guide channels, yellow impact posts, a shutter hood and a slatted blue curtain that lifts clear of the opening.
Workshop wall panel module, 4 m (Car Repair Garage and MOT Workshop)
Ribbed steel cladding panel 4 m wide and 2.8 m tall on a concrete plinth, with a capping rail, side ports on the centre line and a top port for the glazed strip that courses above it.
Workshop window strip module, 4 m (Car Repair Garage and MOT Workshop)
Glazed clerestory course 4 m wide and 1.2 m tall with charcoal mullions, sill and head, built to sit on the wall panel's top port and carry the run up to 4 m.
Shop facade bay, glazed, amber livery (Petrol Station and Forecourt Shop)
The glazed shopfront bay in the amber house colour, matching the amber canopy and totem. Geometry and ports are identical to the green bay.
Roof vent cowl (Petrol Station and Forecourt Shop)
A kerbed extract stack with a weather hat and a coloured band, for the kitchen and toilet vents on a shop roof.
Shop floor tile (Petrol Station and Forecourt Shop)
A 1.5 m square of shop floor on the bay grid: a vinyl field with a proud jointing border and a centre inlay, sized so a floor and a roof are the same count of modules.
Shop wall panel (Petrol Station and Forecourt Shop)
A 1.5 m lined internal wall module at full bay height, with a skirting and a picture rail in the accent colour. Couple them on their stiles for the back of house wall and internal partitions.
Roof plant unit (Petrol Station and Forecourt Shop)
The air conditioning condenser these shops carry on the roof: a cased unit on anti vibration rails with an accent band, a guarded fan cowl, coil louvres down both flanks and the refrigerant pipes leaving the base.
Shop roof panel (Petrol Station and Forecourt Shop)
A 1.5 m square membrane roof deck module on the same grid as the facade bays, dark against the walls with one wide standing seam across it. Lay a field of them just below the signband so the band reads as the parapet round the roof.
Shop facade bay, solid (Petrol Station and Forecourt Shop)
The blank flank bay: a rendered panel between the same pilasters with a recessed louvre vent and a kick band, for the sides and back of the shop and for the stretches a shopfront does not glaze.
Shop facade bay, entrance (Petrol Station and Forecourt Shop)
The entrance bay: the same 1.5 m shell with a lined opening, a transom light and a glazed door on a real hinge with a full height pull. The leaf swings out on its left stile.
Shop facade bay, glazed (Petrol Station and Forecourt Shop)
A 1.5 m glazed shopfront bay: pilasters with accent reveals, a precast cill, a full height pane in a steel frame, a spandrel panel and a blank signband over it. Couple the bays on their jambs to build a shop of any width.
Forecourt canopy section, amber livery (Petrol Station and Forecourt Shop)
The same canopy bay in the amber house colour, for a second operator on the same road or a station rebranded mid project. Geometry, ports and clearance are identical to the green section.