3DAssets.dev

Free models · Game-ready GLB

Buildings

Every modern building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.

Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.

1,471 free GLB models

Gallery Floor Tile (Solar System and Astronauts)

Gallery Floor Tile (Solar System and Astronauts)

A 2 m square gallery floor tile in pale grey with a dark border inlay, tiling into one hall floor.

@3dassets156 tris · 14 ↓
Flat Ceiling 4 m (Bedroom and Living Room Furniture)

Flat Ceiling 4 m (Bedroom and Living Room Furniture)

4 m square ceiling slab on two cross beams with a raised centre panel.

@3dassets256 tris · 9 ↓
Flat Wall Door 4 m (Bedroom and Living Room Furniture)Animated

Flat Wall Door 4 m (Bedroom and Living Room Furniture)

4 m wall with a 900 mm hinged oak door leaf, architrave and skirting.

@3dassets648 tris · 11 ↓
Flat Wall Window 4 m (Bedroom and Living Room Furniture)

Flat Wall Window 4 m (Bedroom and Living Room Furniture)

4 m wall with a 1.6 m glazed window, oak sill and skirting.

@3dassets752 tris · 17 ↓
Flat Wall 4 m (Bedroom and Living Room Furniture)

Flat Wall 4 m (Bedroom and Living Room Furniture)

4 m plain interior wall, 2.6 m high and 120 mm thick, with skirting and a picture rail.

@3dassets176 tris · 14 ↓
Flat Floor 4 m (Bedroom and Living Room Furniture)

Flat Floor 4 m (Bedroom and Living Room Furniture)

4 m square oak floor tray with a walnut inlay border, top face at 60 mm.

@3dassets320 tris · 13 ↓
Pagoda Roof Kiln Vent (Distillery and Bonded Warehouse)

Pagoda Roof Kiln Vent (Distillery and Bonded Warehouse)

Pagoda kiln vent 3.6 m square at the eaves and 3.8 m tall: a slated tapering roof in two stages with a louvred lantern of four faces between them, boarded eaves on all four sides and a plain iron finial. Stands over a kiln, on a wall head or astride a roof ridge.

@3dassets636 tris · 35 ↓
Slate Roof Section (Distillery and Bonded Warehouse)

Slate Roof Section (Distillery and Bonded Warehouse)

Four metre pitched slate roof run spanning 5.2 m and rising 1.5 m to the ridge: a slated gable body with seven laid courses on each slope, timber eaves boards, gutters, rafter feet and a ridge course over the joint. Sits on two wall heads and lays end to end with the next run.

@3dassets368 tris · 27 ↓
Stillhouse Window Bay (Distillery and Bonded Warehouse)

Stillhouse Window Bay (Distillery and Bonded Warehouse)

Four metre wall bay with a 2.6 x 3.0 m industrial window: a dressed sill and lintel, an iron frame of twenty lights with glazing bars, and rubble facing above and below. Lets the stillhouse be seen into, and lays end to end with the plain wall bay.

@3dassets1.4k tris · 32 ↓
Warehouse Door Pair (Distillery and Bonded Warehouse)Animated

Warehouse Door Pair (Distillery and Bonded Warehouse)

Four metre warehouse doorway with a 2.6 m opening under a 3.4 m lintel: dressed jambs, a threshold and two boarded and strapped leaves, painted, that swing out on their outer stiles. Sits in a wall run and carries a wall port at either end.

@3dassets1.5k tris · 38 ↓
Corner Pillar (Distillery and Bonded Warehouse)

Corner Pillar (Distillery and Bonded Warehouse)

Dressed stone corner pillar 0.6 m square and 4.8 m tall with a capping stone: quoined courses on all four faces and a wall port on each side, so it turns a corner, ends a run or joins two runs in line.

@3dassets192 tris · 32 ↓
Wall Section (Distillery and Bonded Warehouse)

Wall Section (Distillery and Bonded Warehouse)

Plain four metre rubble wall bay 4.6 m to the head and 0.4 m thick, faced on both sides, with a plinth course, a string course at 2.3 m and a capping course. The base module of the stillhouse and the warehouse, laid end to end between corner pillars.

@3dassets1.1k tris · 37 ↓
Bonded Warehouse Wall Run (Distillery and Bonded Warehouse)

Bonded Warehouse Wall Run (Distillery and Bonded Warehouse)

Four metre rubble wall bay 4.6 m to the head and 0.4 m thick, faced both sides: a battered plinth course, a capping course, a louvred ventilation grille in a dressed surround and two barred slit vents low down. Lays end to end and meets a corner pillar at either end.

@3dassets1.4k tris · 35 ↓
Boiler Front (Distillery and Bonded Warehouse)

Boiler Front (Distillery and Bonded Warehouse)

Brick set boiler front 2.8 m wide and 3.4 m to the flue: a bolted smokebox door in a riveted ring, a dogged firing door with a sight port, an ash door below, three blank faced pressure gauges and a water gauge glass on the brickwork. Nothing opens.

@3dassets1.8k tris · 9 ↓
Groundsman's Hut (Racecourse and Parade Ring)Animated

Groundsman's Hut (Racecourse and Parade Ring)

A 3.5 m timber groundsman's hut with a glazed window, a mono pitch roof falling to the back and a green door on the right hand jamb that swings open.

@3dassets168 tris · 14 ↓
Horse Walk Tunnel Mouth (Racecourse and Parade Ring)

Horse Walk Tunnel Mouth (Racecourse and Parade Ring)

The mouth of the horse walk: a 5.4 m ramped opening between rendered wing walls with a portal beam over it, a white guide rail each side and the tunnel falling away into the dark.

@3dassets360 tris · 14 ↓
Bar and Food Kiosk (Racecourse and Parade Ring)

Bar and Food Kiosk (Racecourse and Parade Ring)

A 4.7 m raceday bar and food kiosk: a red and white cabin with a timber counter, an awning on struts, an urn and a hot cabinet on the counter and a blank fascia board.

@3dassets232 tris · 13 ↓
Tote Hut (Racecourse and Parade Ring)Animated

Tote Hut (Racecourse and Parade Ring)

A 3.9 m betting hut: a green timber cabin with a serving counter, a glazed screen, a blank fascia over the window and a side door that opens on its own node.

@3dassets168 tris · 11 ↓
Private Box Front (Racecourse and Parade Ring)

Private Box Front (Racecourse and Parade Ring)

A 6 m private box: a glazed front over a green spandrel with white mullions, a balcony rail in front of it and a flat roof, for the top of a grandstand bank.

@3dassets288 tris · 12 ↓
Grandstand Roof Canopy (Racecourse and Parade Ring)

Grandstand Roof Canopy (Racecourse and Parade Ring)

A 12 m grandstand roof canopy on two 8.4 m columns: a green deck 8.6 m deep cantilevered forward over the terracing on tie rods, with a white fascia along its front edge.

@3dassets200 tris · 11 ↓
Grandstand Tier Low (Racecourse and Parade Ring)

Grandstand Tier Low (Racecourse and Parade Ring)

A 12 m bank of grandstand terracing, eight steps 0.75 m deep rising 2.6 m, with a rendered front wall, end walls and crush barriers across every third row.

@3dassets744 tris · 12 ↓
Grandstand Tier High (Racecourse and Parade Ring)

Grandstand Tier High (Racecourse and Parade Ring)

The upper bank of the same 12 m grandstand: eight steps on a 1.4 m plinth, 4.4 m to the back rail, so a second tier stands behind the low one and still sees the finish.

@3dassets756 tris · 10 ↓
Weighing Room Front (Racecourse and Parade Ring)Animated

Weighing Room Front (Racecourse and Parade Ring)

The weighing room: an 8 m by 5 m rendered building 3.9 m to the eaves with a glazed window either side of the door, a blank board over it and three steps up to the threshold.

@3dassets288 tris · 10 ↓
Saddling Box Run (Racecourse and Parade Ring)

Saddling Box Run (Racecourse and Parade Ring)

A run of three open fronted saddling boxes 10.8 m wide and 3.8 m deep: rendered partitions, a tie ring in each back wall, a lintel over every opening and a flat green roof with a drip edge.

@3dassets480 tris · 14 ↓