About
A 70 degree arc of internal hull frame: two ring frame tubes joined by five uprights, three snapped radial stringers and a remnant of outer skin still bolted to the outer face. Bounding size 2.51 x 2.08 x 1.11 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the asset.
Use the “Internal frame piece (UFO Crash Site and Recovery Facility)” asset in my project. Model: https://cdn.3dassets.dev/assets/17331/v1/model.glb Asset page: https://3dassets.dev/assets/ufo-crash-site-and-recovery-facility-internal-frame-pi-e2c789ca Description: A 70 degree arc of internal hull frame: two ring frame tubes joined by five uprights, three snapped radial stringers and a remnant of outer skin still bolted to the outer face. - Dimensions (X × Y × Z): 2.514 × 2.082 × 1.106 metres - Triangles: 752 - Animations: none - Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) - Loading: Three.js GLTFLoader; no additional decoders required.
Also available as JSON, Markdown, or via the MCP server.
Import manually
Choose your framework, then copy the code into your project to load the asset.
import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'
const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/17331/v1/model.glb', (gltf) => {
scene.add(gltf.scene)
})Common questions
How do I use this model with my AI development tools?
How do I get started?
Which game engines and tools can I use this model with?
How do I import this model into Unity, Godot, Unreal or Blender?
Can I use this model in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Do I need Draco, Meshopt or KTX2 to load it?
Internal frame piece (UFO Crash Site and Recovery Facility)
A 70 degree arc of internal hull frame: two ring frame tubes joined by five uprights, three snapped radial stringers and a remnant of outer skin still bolted to the outer face.
More in Props & Furniture
Tripwire Bell (Undercity Sewers and Thieves Den)
Small fictional alarm bell and a visible low cord; supplied as a static prop.
Spike Trap Plate (Undercity Sewers and Thieves Den)
Static fictional trap plate with nine tapered spikes; no mechanism or game logic.
Dog Kennel (Undercity Sewers and Thieves Den)
Open-front timber kennel with a two-slope roof and raised dry floor.
Guard Post (Undercity Sewers and Thieves Den)
Compact watch station with a protected timber front and inspection lantern.
Fake Wall Panel (Undercity Sewers and Thieves Den)
Removable brick-faced concealment panel on rear timber battens.
Jewellery Tray (Undercity Sewers and Thieves Den)
Small wooden display tray carrying two rings and a curved chain.
Coin Sacks (Undercity Sewers and Thieves Den)
Two tied cloth purses with rounded bodies and gathered necks.
Map Of City (Undercity Sewers and Thieves Den)
Flat parchment city diagram with a street grid and one marked district; no real geography.
Den Weapon Rack (Undercity Sewers and Thieves Den)
Timber equipment rack with three original generic blades and leather grips.
Disguise Rack (Undercity Sewers and Thieves Den)
Freestanding costume rail with three hanging garments and broad felt hats.
Wanted Poster Wall (Undercity Sewers and Thieves Den)
Brick wall covered with five blank abstract portrait notices, without names or readable text.
Stew Pot (Undercity Sewers and Thieves Den)
Open cooking pot with a visible stew surface and raised carrying bail.
Similar assets
120 degree three-wing workstation (Downtown Office Interiors)
A three-wing 120 degree workstation pod: three 1.1 m worksurfaces on a shared turned centre post, each with an A-frame outer leg and a fabric privacy upstand.
Internal door display frame (Hardware Store and DIY Warehouse)
A 1.9 m door display: a steel A frame holding four internal door leaves upright on edge, with a moulded panel face on each and a floor kerb to stop them sliding.
Cutaway hull section (UFO Crash Site and Recovery Facility)
A 100 degree wedge cut from a scout hull and mounted on a steel cradle for study: outer and inner skins with their true wall thickness, three ring frames, six radial ribs, a deck plate and a glowing conduit run.
Wreath frame rack (Garden Centre and Florist)
A rack of bare wreath frames: a steel A frame with three cross rails hanging copper wire rings in three diameters, plus a shelf of moss lined bases and a blank ticket holder.
Forty-five degree circuit corner (Formula Race Cars and Grand Prix Circuit)
Forty-five degree circuit corner in an original generic circuit family.
Pallet rack upright frame 6 m (Hardware Store and DIY Warehouse)
A 6 m pallet racking upright frame: two perforated columns 1.1 m apart, welded baseplates with floor anchors, horizontal ties and a full diagonal bracing lattice.
Pallet rack upright frame 4 m (Hardware Store and DIY Warehouse)
A 4 m pallet racking upright frame: two perforated columns 1.1 m apart, welded baseplates with floor anchors, horizontal ties and a full diagonal bracing lattice.
Three Frame Service Hangar (Mech Robots and Battle Hangar)
Three independently assembled scout, line and assault frames in service cradles beneath overhead crane rails, with diagnostic and repair equipment. Static models with typed socket assertions; no rig.
Pipe and dowel tube rack (Hardware Store and DIY Warehouse)
A 1.2 m wide upright tube rack: a welded steel frame divided into twelve open compartments by tube dividers, for dowel, conduit, angle and moulding sold by the length.
Visitor sofa, three seat (Office Lobby and Building Facilities)
A 2.22 m three-seat visitor sofa on the same frame and cushion module as the two-seat version, with three piped seat cushions and three back pads.
Spin arc ring (VFX Mesh Library)
A closed horizontal ribbon ring with a swelling leading edge, an inner torus band and seven rising flicks.
Overland conveyor module, 30 degree horizontal curve (Ore Processing and Haulage Plant)
A 12 m conveyor module turning 30 degrees on a 22.9 m radius: curved stringers on braced bents set square to the arc, the troughed belt and idler frames rotated to follow the curve, and a curved walkway with handrails and a toe board on the outside of the turn.