3D Assets
@3dassets
Rope Coil (Lighthouse and Rocky Coast)
Coil of tarred rope 1.15 m across and 0.43 m high, six turns flaked down in three layers with the working end run off to the side. The coil is solid geometry and never moves.
Driftwood Pile (Lighthouse and Rocky Coast)
Bleached driftwood thrown up at the strand line: five worn baulks with five branches across them, about 2.4 m over the pile. Dress the top of a shingle module with it.
Wreck Rib Set (Lighthouse and Rocky Coast)
The remains of a wooden boat in the shingle: a 5.4 m keel timber with seven pairs of ribs still standing off it, the tallest about 1.6 m. Bed it into a beach module at whatever angle suits.
Bell Buoy (Lighthouse and Rocky Coast)
Bell buoy 2.9 m tall on a 1.25 m float: a red drum with a white shoulder, a four legged iron cage and the bell hung in the top of it. Markings are plain colour only.
Marker Buoy (Lighthouse and Rocky Coast)
Channel marker buoy 2.5 m tall and 0.85 m across: a conical red body on a white shoulder with a plain cross topmark and a mooring ring at the waterline. The topmark shape is invented and carries no letters or numbers.
Fishing Net on Frame (Lighthouse and Rocky Coast)
Net drying frame 4.1 m wide: two pairs of leaning timber posts carrying a head rope and a hung net of thirteen by seven cords with three float balls on it. The net is a rigid lattice and does not move.
Lobster Pot Stack (Lighthouse and Rocky Coast)
Four arched lobster pots, three stacked and one leaning beside them, with a coil of warp line. About 1.6 by 1.4 m and 1.5 m tall, for a quay corner or the back of a boat.
AnimatedBoat Trolley (Lighthouse and Rocky Coast)
Timber launching trolley for the rowing boat: two bunk rails on six angled chocks over an axle, two iron shod wheels on their own spin nodes and a draw bar with a handle. 2.4 by 3.9 m, sized to the slipway rails.
Rowing Boat (Lighthouse and Rocky Coast)
Open rowing boat 3.8 m long and 1.5 m in the beam: an open hull with a capped gunwale, three thwarts, a stern seat, a pair of oars shipped inboard on their rowlocks and a coiled painter at the bow.
Jetty Deck Module (Lighthouse and Rocky Coast)
Timber jetty in 6 m bays: four driven piles, cross bracing, a twelve board deck 2.4 m wide at the land datum and an iron handrail down each side. End ports run bays out over the water.
Slipway (Lighthouse and Rocky Coast)
Stone slipway as a 6 m ground module: the top falls from the land datum to the waterline, with low side walls, nine timber sleepers across it and a pair of iron rails for a boat trolley.
Mooring Bollard (Lighthouse and Rocky Coast)
Cast iron mooring bollard 0.95 m tall on a stone pad, with a flared collar and a domed head. Set them along the jetty and the quay edge.
Sea Stack (Lighthouse and Rocky Coast)
Isolated sea stack about 6.5 m tall on a 2.8 m base, five weathered courses narrowing to a peak, with two fallen stones at its foot. Stand it offshore on a water module.
Boulder Large (Lighthouse and Rocky Coast)
Large fallen boulder about 2.8 m across and 2.3 m tall, four faceted stones weathered together. Big enough to break a sight line or shelter a rock pool.
Boulder Medium (Lighthouse and Rocky Coast)
Shore boulder about 1.4 m across, three faceted stones weathered together. The middle of the boulder set, at knee to waist height beside a path.
Boulder Small (Lighthouse and Rocky Coast)
Small shore boulder about 0.7 m across, two faceted stones weathered together. Scatter it along the strand line and round the foot of the cliff.
Foam Edge Plate (Lighthouse and Rocky Coast)
Broken water where the sea meets the rock: a 6 m strip of white foam 0.9 m wide with eleven overlapping crests along it. Lay it on the water modules against the shore, end port to end port.
Cliff Face Module (Lighthouse and Rocky Coast)
Cliff backdrop in 6 m bays: five courses of weathered rock rising 4.3 m to a turfed lip, 1.4 m deep, with end ports so a run of bays makes a continuous headland behind the shore.
Sea Water Plane Module (Lighthouse and Rocky Coast)
The water: a 6 m square plane of gently faceted sea 0.35 m thick, sharing the edge ports of the land modules so the shoreline is a step in one continuous ground rather than a hole in it.
Shingle Beach Module (Lighthouse and Rocky Coast)
Shingle module for the strand line: a 6 m square of pale pebble bank 1.5 m thick with twenty two graded cobbles and two rock outcrops loose on the surface. Tiles with the rock shelf and the water plane on its edge ports.
Cliff Top Grass Module (Lighthouse and Rocky Coast)
Turf module for the headland behind the shore: a 6 m square of clifftop grass 1.5 m thick with two rock outcrops breaking through it and twenty two clumps of coarse grass. Shares the edge ports of the rock modules.
Tide Pool Shelf Module (Lighthouse and Rocky Coast)
Rock shelf module holding three tide pools: raised rock rims with standing water inside them, plus loose blocks and weed. Same 6 m footprint and edge ports as the plain shelf, so swap one in anywhere.
AnimatedKeeper's Handcart (Lighthouse and Rocky Coast)
Two wheeled timber handcart for bringing stores up from the slipway, 1.2 by 2.5 m with a boarded body, iron shod wheels on their own spin nodes and long pull handles.
Rocky Shelf Module (Lighthouse and Rocky Coast)
The coast base module: a 6 m square of wave cut rock 1.5 m thick, with a broken faceted top, six weathered outcrops standing proud of it and a little shore grass. Tiles with every other ground module on its edge ports.