Working harbour

Walk a 26 by 38 metre harbour built from the Harbor and Tackle pack: a tackle shop, boathouse, smokehouse and market stall on the quay, a railed pier running out over the water, a moored fishing boat and canoe, and marker buoys.

About

One harbour from 24 of the pack's 58 models, on plain quay stone in the outdoor preset with daylight and four 12 m water tiles.

You start on land looking towards the water. The tackle shop with its rod rack and the fish market stall are on the west, the boathouse, the smokehouse and a drying rack on the east, with the fish cleaning station, crates, a catch cooler, mooring bollards, a ladder and a gangway along the quay edge. The pier runs out over the water: a T-junction, three straight sections and a corner with cedar and rope railings, the cabin fishing boat moored on one side and the canoe on the other, with channel marker buoys and coastal rocks beyond.

Nothing moves: this pack ships without animation clips, and the water is a flat tile. The fish and the tackle in the pack are not placed here. Walking stays at quay level, so the pier is a path and the water is a floor.

Every piece here is a published model from the pack, placed by hand. Walk with the keys or touch, and approach a piece to see it move if it has animation. Colliders, navigation and gameplay are yours to add.

Points of interest

Tackle shop
The harbour tackle shop with a six-slot rod rack outside it, and the fish market stall on the quay.
Harbor Tackle Shop (Harbor & Tackle)
Smokehouse
The cedar boathouse, the fish smokehouse and a fish drying rack on the east side of the quay.
Fish Smokehouse (Harbor & Tackle)
The quay
Twin-horn mooring bollards along the quay edge, seafood crates, a catch cooler, the fish cleaning station, an access ladder and a gangway down to the water. The water is four 12 m tiles set just below the ground.
Twin Horn Mooring Bollard (Harbor & Tackle)
The pier
A T-junction pier, three straight sections and a corner section run 15 m out over the water with cedar and rope railings. Pier sections are 3 m, so a pier is placed at 3 m steps.
Straight Pier Section (Harbor & Tackle)
Boats
The cabin fishing boat moored beside the pier, the expedition canoe on the other side, and two channel marker buoys out in the harbour.
Cabin Fishing Boat (Harbor & Tackle)
Angler
An angler's umbrella and folding stool at the end of the quay by the rescue ring.
Angler’s Umbrella (Harbor & Tackle)

Use with an AI agent

Copy this prompt into your AI chat to rebuild the layout, then describe what to change.

Rebuild the "Working harbour" demo scene from the Harbor & Tackle pack in my project.

Layout (JSON, every placement with its CDN URL): https://3dassets.dev/api/v1/demos/harbor-and-tackle
Pack manifest: https://3dassets.dev/api/v1/packs/harbor-and-tackle
Demo page: https://3dassets.dev/demos/harbor-and-tackle

- 42 placements of 24 models; units are metres, +Y up, rotation is yaw in degrees about +Y
- Spawn at (0, 0, -12) facing 0 degrees; eye height 1.6 m
- Licence: CC0 1.0 Universal (no attribution required)
- Loading: three.js GLTFLoader, one load per distinct model, cloned per placement; no decoders required

Also available as JSON or Markdown, and via the MCP server.

Models in this demo

Harbor Water Tile (Harbor & Tackle)

12 m opaque miniature sea tile with sculpted low wavelets and pale crest strokes.

@3dassets2.4k tris