Walkable demo
Garden centre yard
Walk a 24 by 21 metre garden centre built from the Garden Centre and Florist pack: a 20 m glasshouse of bay modules with benches and displays inside, raised sales beds, tree frames, hard landscaping pallets, a furniture deck and cafe tables outside.
About
One garden centre from 24 of the pack's 100 models, on plain paving in the outdoor preset with daylight.
You start at the back of the yard among the compost and paving pallets, the sleeper stack and the fence panel rack, with the water feature display ahead. Six raised sales beds and the plant trolleys take the west side, three tree and shrub frames, the cafe tables and the furniture deck with its parasol the east. The glasshouse runs across the front: ten bay modules, a door bay and two gable ends, with rolling benches and tiered stands inside, a hanging basket rail, the till counter, a seed rack and the bulb spinner.
Nothing moves: this pack ships without animation clips. The florist workroom and the polytunnel in the pack are not placed here.
Every piece here is a published model from the pack, placed by hand. Walk with the keys or touch, and approach a piece to see it move if it has animation. Colliders, navigation and gameplay are yours to add.
Points of interest
Hard landscaping
Compost bag pallets, paving slab pallets, a timber sleeper stack and the fence panel display rack along the back of the yard, with the water feature display in front.
Paving slab pallet (Garden Centre and Florist)Outdoor beds
Six raised timber sales beds in two rows, with customer plant trolleys and the trolley bay by the west fence.
Raised timber sales bed (Garden Centre and Florist)Trees and shrubs
Three tree and shrub display frames, two cafe table pairs and the department signage totems either side of the door.
Tree and shrub display frame (Garden Centre and Florist)Furniture deck
The garden furniture display deck with an open parasol beside it, and two Danish trolleys parked by the fence.
Garden furniture display deck (Garden Centre and Florist)The glasshouse
Ten glasshouse bay modules with a door bay in the middle and gable ends, 20 m long. Each bay is 2 m, so a glasshouse is placed at 2 m steps.
Glasshouse door bay (Garden Centre and Florist)Inside
Rolling glasshouse benches and tiered plant display stands down both sides, a hanging basket rail, the till counter, a seed packet rack and the bulb spinner.
Rolling glasshouse bench 1800 (Garden Centre and Florist)
Use with an AI agent
Copy this prompt into your AI chat to rebuild the layout, then describe what to change.
Rebuild the "Garden centre yard" demo scene from the Garden Centre and Florist pack in my project. Layout (JSON, every placement with its CDN URL): https://3dassets.dev/api/v1/demos/garden-centre-and-florist Pack manifest: https://3dassets.dev/api/v1/packs/garden-centre-and-florist Demo page: https://3dassets.dev/demos/garden-centre-and-florist - 57 placements of 24 models; units are metres, +Y up, rotation is yaw in degrees about +Y - Spawn at (0, 0, 14.5) facing 180 degrees; eye height 1.6 m - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader, one load per distinct model, cloned per placement; no decoders required
Also available as JSON or Markdown, and via the MCP server.
Models in this demo
Glasshouse bay module (Garden Centre and Florist)
A 2 m retail glasshouse bay on a 4 m span: half width aluminium portal frames at both edges, glazed side walls on a 450 mm dwarf wall, two glazed roof slopes, eaves gutters and a ridge capping.
Glasshouse door bay (Garden Centre and Florist)
A glasshouse bay with the customer entrance in its front wall: a 1.1 m glazed door in an aluminium frame with a threshold, a kick plate and a pull handle, hinged as a named node.
Glasshouse gable end (Garden Centre and Florist)
The glazed gable that terminates a glasshouse run: a half portal frame, a full height glazed end wall on the dwarf wall, a triangular gable light with a king post and verge rafters.
Rolling glasshouse bench 1800 (Garden Centre and Florist)
A 1.8 m rolling bench: a galvanised tray top with turned up side rails riding on roller tubes, a braced leg frame with adjustable feet, and the anti tip stops at each end of the roll.
Tiered plant display stand (Garden Centre and Florist)
A three tier A frame display stand in painted steel: stepped shelves rising toward the back, a slatted lower deck, a label rail on every step and rubber footed legs.
Hanging basket rail (Garden Centre and Florist)
A free standing basket rail: two braced posts carrying a 2 m tube at 2.05 m, with three empty wire lined baskets on chain hangers and a drip tray shelf underneath.
Till counter module (Garden Centre and Florist)
A 1.2 m till counter: a carcass on a recessed plinth with a laminate top, a customer side price ledge, a scanner and card terminal on a post, a bag shelf and a cash drawer as a named node.
Till counter corner (Garden Centre and Florist)
The corner unit that turns a till run: a 0.7 m square carcass with a mitred laminate top, a returned price ledge, a bin aperture in the top and matching plinth on both faces.
Seed packet rack (Garden Centre and Florist)
A free standing seed rack: a painted steel A frame carrying six rows of wire packet pockets on each face, a blank header board and a lower stock shelf on levelling feet.
Bulb packet spinner (Garden Centre and Florist)
A four sided rotating spinner: a castored base, a central column with a thrust bearing, four wire pocket panels of blank packets and a square header cap at the top.
Department signage totem (Garden Centre and Florist)
A double sided department totem: a weighted base, a tapered aluminium post and a blank 0.6 m sign panel with a curved cap and an inset lower ticket window.
Trolley bay (Garden Centre and Florist)
A trolley return bay: two galvanised guide rails on floor feet with an end stop and a blank instruction plate, holding three nested plant trolleys pushed into the bay.
Customer plant trolley (Garden Centre and Florist)
A flat deck customer plant trolley: a mesh deck at 0.24 m in a pressed steel pan with edge kerbs, a tubular push handle with a grip and four swivel castors on splayed mounts.
Raised timber sales bed (Garden Centre and Florist)
A 1.6 m raised sales bed: sleeper sides on corner posts, a slatted false floor at 0.45 m, a capping rail wide enough to sit a pot on and drainage slots in the base.
Tree and shrub display frame (Garden Centre and Florist)
A heavy duty frame for standing potted trees against: a galvanised A frame on ground rails with three tying rails, a kick board and a gravel tray floor for irrigation run off.
Water feature display (Garden Centre and Florist)
A running water feature on a display reservoir: a pebble topped sump grid, a cast three tier bowl cascade on a plinth, a still water surface in each bowl and a pump box with a flow tap.
Compost bag pallet (Garden Centre and Florist)
A full pallet of multipurpose compost: four courses of two heavy plastic sacks cross stacked on a block pallet, sagging over each other under a shrink wrap skirt and two banding straps.
Paving slab pallet (Garden Centre and Florist)
A pallet of 0.45 m riven paving: two banks of slabs stood on edge with steel edge protectors under two straps, plus a single slab leaning at the front as a display sample.
Timber sleeper stack (Garden Centre and Florist)
A stack of treated softwood sleepers: four courses of three sawn baulks with visible saw marks and slightly offset ends, on two bearers with a strap over the top course.
Fence panel display rack (Garden Centre and Florist)
An A frame rack of fence panels: a galvanised frame with padded rails holding five close boarded panels leaning on each face, a foot kerb and a blank ticket rail along the top.
Garden furniture display deck (Garden Centre and Florist)
A raised timber display deck for outdoor furniture: grooved decking boards on joists, a chamfered fascia, a two board access step and a corner post with a blank ticket frame.
Parasol display, open (Garden Centre and Florist)
A display parasol opened on its base: a cast base with a moulded rim, an alloy pole with a crank hub, eight ribs with struts and a scalloped canopy with a finial.
Cafe table and chair pair (Garden Centre and Florist)
A two seat bistro set for the garden centre cafe: a folding slatted round table on a cast frame and two folding chairs with curved slatted backs and slatted seats.
Danish trolley, four shelves (Garden Centre and Florist)
The Danish trolley loaded with four mesh shelves at the standard 0.36 m spacing, each dropped onto the coloured shelf lugs on the uprights, ready for trays of stock.