Free models · Game-ready GLB
Modern
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
13,443 free GLB models
Framed Canvas (Art Gallery and Exhibition Rooms)
A 0.9 m by 0.7 m framed canvas in a dark moulding: a plain ground with an abstract composition of three colour blocks, a placeholder for a consumer's own artwork.
Gallery Bin (Art Gallery and Exhibition Rooms)
A 0.7 m gallery waste bin: a dark drum on a recessed plinth with a steel top ring and an open aperture, the one piece of housekeeping a public room shows.
Air Grille (Art Gallery and Exhibition Rooms)
A 600 mm by 300 mm supply grille: a dark frame with nine steel blades, the vent a sealed hung room needs high on a wall.
Rope Barrier Post (Art Gallery and Exhibition Rooms)
A rope barrier post with a 1.5 m rope: a weighted base, a polished column, a ball head and a sagging red rope reaching the next post along +X.
Retractable Belt Stanchion (Art Gallery and Exhibition Rooms)
A retractable belt stanchion: a weighted base, a post with a cassette head and a 1.2 m red belt drawn out along +X to the next post.
Gallery Bench Blue (Art Gallery and Exhibition Rooms)
The gallery bench with painted blue slats, so a white room has one strong block of colour in the middle of its floor.
Gallery Bench Backed (Art Gallery and Exhibition Rooms)
The gallery bench with a three slat back, for the wall side of a room where a visitor sits facing one work rather than facing both ways.
Gallery Bench (Art Gallery and Exhibition Rooms)
A 1.56 m backless gallery bench: five oak slats on two cast ends with a tie rail, the seat that goes in the middle of a hung room.
Picture Light (Art Gallery and Exhibition Rooms)
A 500 mm picture light on a swan bracket: a wall plate, an arm and a half round shade with an emissive strip under it, the lamp hung over one framed work.
Track Spot Head (Art Gallery and Exhibition Rooms)
A track mounted spotlight: a shoulder clamp, a knuckle and a barrel with a baffled emissive lens, the head a gallery aims at one work.
Lighting Track Section (Art Gallery and Exhibition Rooms)
A 2 m section of three circuit lighting track: a dark extrusion with a steel spine and two drop rods to a ceiling plate 500 mm above it, the rail every spot in this pack clamps to.
Skirting Run (Art Gallery and Exhibition Rooms)
A 2 m run of gallery skirting: a dark 120 mm board with a white bead on top, the trim that takes the scuffs where a wall meets a floor.
Gallery Floor Tile Poured (Art Gallery and Exhibition Rooms)
The floor tile as a poured resin screed with two saw cut joints, for the sculpture room or the service side where a boarded floor would read as domestic.
Gallery Floor Tile (Art Gallery and Exhibition Rooms)
A 2 m square of boarded gallery floor: an oak slab with four proud joint lines running along Z, the tile every room in this pack stands on.
Movable Partition Wall (Art Gallery and Exhibition Rooms)
A 1.8 m by 2.4 m movable partition on two cast feet: a white faced panel in a dark edge frame, the wall a curator adds across a room for one show.
Gallery Wall Module Tall (Art Gallery and Exhibition Rooms)
The gallery wall module at 4.2 m, for the double height room a large hung work needs, on the same 2 m grid and the same port heights.
AnimatedGallery Doorway Module (Art Gallery and Exhibition Rooms)
A 2 m wall module with a 1 m by 2.1 m opening, a dark threshold strip, lined jambs and a timber leaf on the left jamb, the way a visitor gets from one hung room to the next.
AnimatedFire Exit Module (Art Gallery and Exhibition Rooms)
A 2 m wall module with a fire exit: a green leaf on a push bar under a lit green over door box, for the escape route every public room needs.
Gallery Wall Module (Art Gallery and Exhibition Rooms)
A 2 m by 3.2 m module of white gallery wall with a dark shadow reveal down each edge and a capping cornice, the panel a hung room in this pack is built from.
Escape Room Venue: Two Themed Rooms and Front of House (Escape Room and Puzzle Venue)
A working escape room venue on its own 1.2 m floor tiles, 14 by 9 m: two themed rooms side by side built from the pack's wall modules, the corridor between them and the front of house in front. The left room is a panelled study with the false bookcase door in its back wall, a...
AnimatedPedal Waste Bin (Escape Room and Puzzle Venue)
A 400 mm pedal bin 660 mm tall for a foyer or a corridor: a dark drum with two brass bands, a pedal and its linkage, and a domed lid with a brass knob on its back hinge. The lid lifts and closes; the pedal linkage is fixed, because a four bar linkage cannot be rigged.
AnimatedDrinks Vending Machine (Escape Room and Puzzle Venue)
A 940 by 1920 mm drinks machine for a venue foyer: a dark case on a steel plinth with a red header band, four shelves of plain unbranded cans behind a glazed door on its hinge, a coin fascia and a delivery tray. The door opens and closes; the stock is fixed.
Photo Backdrop with a Frame Prop (Escape Room and Puzzle Venue)
The corner a group is photographed in: a 2.1 by 2.24 m teal cloth on a braced steel frame with an abstract block pattern on it, and an oversize brass picture frame prop leaning against the foot. The pattern carries no venue name and the frame is empty.
Leaderboard Frame (Escape Room and Puzzle Venue)
A 1.16 by 1.56 m brass framed leaderboard on a walnut ground: a header bar and nine rows of abstract name and time blocks, the leading three picked out in brass. Nothing on it is readable, so it carries no venue or person. Static geometry.