Free models · Game-ready GLB
Modern
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
14,038 free GLB models
Cable tray bay, 6 m (Offshore Oil Rig and Platform)
A 6 m run of ladder cable tray on cantilever brackets, loaded with four cable bundles and a junction box. Couple the bays end to end to route power and instrument cable across a deck.
AnimatedPipe rack bay, 6 m (Offshore Oil Rig and Platform)
A 6 m pipe rack bay: a two tier portal frame carrying six flanged lines in process grey, utility white, firewater red and instrument yellow, with an isolating gate valve and a line marker. The handwheel turns.
AnimatedWellhead and christmas tree (Offshore Oil Rig and Platform)
A wellhead with its christmas tree: the conductor and casing head on a base plate, the tubing head spool, master and swab valves and two wing valves on the flow cross, with a blank identification plate. The handwheels turn.
Flare boom tip (Offshore Oil Rig and Platform)
The burner end of a flare boom: a short truss stub carrying the weathered flare tip, its wind shield and three pilot burners on their risers, with the ignition box slung underneath.
Flare boom section (Offshore Oil Rig and Platform)
One bay of an inclined flare boom: a square tubular lattice climbing 6 m over a 10 m run, carrying the flare header, the pilot gas line and a grated access walkway along its length. Couple the bays nose to tail for a boom of any reach.
AnimatedBlowout preventer stack (Offshore Oil Rig and Platform)
A blowout preventer stack on its support frame: the wellhead connector, two ram preventer bodies with their side operating cylinders, the annular preventer on top and the choke and kill outlets with their valves. The handwheels turn.
AnimatedCement unit (Offshore Oil Rig and Platform)
A skid mounted cementing unit: two conical batch mixing tanks with their charging lines, a triplex cementing pump with its flywheel, the high pressure discharge line and a blank instrument cabin. The flywheel turns.
AnimatedLinear motion shale shaker (Offshore Oil Rig and Platform)
A linear motion shale shaker: the possum belly feed box, an inclined screen deck in its basket with the vibrator motor on top, the cuttings discharge and a blank control box. The deck shakes.
AnimatedActive mud tank, agitated (Offshore Oil Rig and Platform)
The same mud tank with two mechanical agitators mounted through the top walkway, their gearboxes and shafts standing over the manways. The shafts turn.
Active mud tank (Offshore Oil Rig and Platform)
A 6 m active mud tank: a baffled steel tank on a skid with external stiffeners, a grated top walkway with handrails, two bolted manways, a suction line and a blank gauge board on the end.
AnimatedTriplex mud pump (Offshore Oil Rig and Platform)
A triplex mud pump on its skid: the power end with its flywheel, the fluid end with three modules and their discharge caps, a pulsation dampener, the suction manifold and a blank local panel. The flywheel turns.
AnimatedIron roughneck (Offshore Oil Rig and Platform)
The iron roughneck: a column on a floor track carrying the spinner and torque wrench head with its jaw housing, plus a blank operator panel on a bracket. The head reaches in toward the well centre and back.
Setback pipe rack with stands (Offshore Oil Rig and Platform)
The setback: fourteen 8.6 m stands of drill pipe standing in a fingerboard rack, held at two levels by hazard painted fingers on a base plate. Stands the way they are racked back on a drill floor between runs.
Drill pipe bundle on trestles (Offshore Oil Rig and Platform)
Twelve joints of drill pipe with upset tool joints racked horizontally in three tiers on two stop ended trestles, ready to be picked up off the pipe deck.
AnimatedDrill floor with rotary table (Offshore Oil Rig and Platform)
The drill floor: a braced 8 m substructure under a grated floor with the rotary table and its master bushing set in a raised beam, the rotary slot and mousehole covers, and the driller cabin in one corner. The table turns.
AnimatedDrawworks (Offshore Oil Rig and Platform)
The hoisting drawworks on its skid: a grooved drum between two brake flanges in a painted frame, the drive housing, the auxiliary brake and the driller control stand with a blank screen. The drum turns.
AnimatedDerrick crown block (Offshore Oil Rig and Platform)
The crown block that caps a derrick: a short lattice bay carrying a five sheave cluster on its shaft between two support beams, a grated crown platform and a blank obstruction light. The sheave cluster turns.
Derrick section, 8 m (Offshore Oil Rig and Platform)
An 8 m stackable section of a square lattice drilling derrick: four chords with horizontal ties and crossed diagonals on all four faces, a climbing ladder, a racking board with finger latches and painted bands.
AnimatedTravelling block and hook (Offshore Oil Rig and Platform)
The travelling block with its link and hook, standing on its guide frame: the block hoists up its guide and the hook safety latch swings clear. Landed at the well centre the way a block is left between runs.
Sea surface module, 20 m (Offshore Oil Rig and Platform)
A 20 m square of open sea with a low crossing swell, for placing a platform, a jacket or a vessel in water. Tile the modules on the 20 m grid to make as much sea as a scene needs.
Deck stair flight, 2.4 m rise (Offshore Oil Rig and Platform)
A twelve tread stair flight climbing 2.4 m over a 3 m run, with channel stringers, grated treads, a handrail and a knee rail each side and a landing plate at the foot.
AnimatedDeck access hatch (Offshore Oil Rig and Platform)
A 1.3 m deck access hatch in its coaming: a raised frame with a recessed seat and a hinged hazard painted lid with a lifting ring, hinged along its back edge.
Deck handrail run, 6 m (Offshore Oil Rig and Platform)
A 6 m offshore handrail run on three stanchions: a tubular top rail, a flat knee rail and a kicking plate, with bolted base plates at both ends. Repeat it round a deck edge or a walkway.
Deck walkway section, 6 m (Offshore Oil Rig and Platform)
A 6 m raised walkway bay: grated tread plate on six trestle legs with a full handrail, knee rail and kicking plate on both sides. Couple the bays end to end to route a walkway across a deck.