Free models · Game-ready GLB
Modular
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,072 free GLB models
Gantry Crane Section (Rocket Launch Pad and Gantry)
The gantry tower section topped with a slewing jib crane: a yellow mast on the deck, an 7.4 m boom over the pad and a hook block on a static fall. Same 6 m module and the same base and top ports as the plain section.
Gantry Tower Section (Rocket Launch Pad and Gantry)
One stackable 6 m section of service gantry: a 5.2 m square lattice bay with a grated deck, handrails on three sides and a stair flight up the back. Base and top ports on the tower axis, so a structure of any height is repeats of this piece.
AnimatedGantry Base Section (Rocket Launch Pad and Gantry)
The bottom 6 m of the service gantry: a 5.2 m lattice bay on four concrete footings, a grated deck and handrails at the top, an access stair off the back and a plant room at the foot with a door that opens.
Cable Tray Run (Rocket Launch Pad and Gantry)
An 8 m elevated cable tray on two stanchions, 1.5 m to the deck, carrying three bundles in a ladder tray with side rails. Ported at both ends at tray height so a tray route crosses a pad without blocking it.
Blast Fence Panel (Rocket Launch Pad and Gantry)
A 4.4 m blast fence panel, 3.7 m tall: a braced steel frame on two ballast pads carrying a deflection plate with vertical stiffeners and a yellow cap rail. Ported left and right so a blast wall runs as far as the pad needs.
Sound Suppression Pipe Run (Rocket Launch Pad and Gantry)
An 8 m length of 1.1 m sound suppression water main on concrete saddles, with seven standpipes and outlet heads along the top and a control box on the flank. Ported at both ends, so a suppression ring is built from repeats.
Cable Trench Section (Rocket Launch Pad and Gantry)
An 8 m cast cable trench with five removable lid slabs, a cable bed inside and a yellow duct run along one wall. Ported at both ends so power and signal routes run from the firing room to the pad.
Deluge Pipe Run (Rocket Launch Pad and Gantry)
An 8 m run of 600 mm deluge main on concrete saddles, with flanged ends, a standpipe tapping and an isolation valve body. Ported at both ends on the pipe centreline so a water main runs the length of the pad.
Deluge Pipe Elbow (Rocket Launch Pad and Gantry)
The deluge main turning a right angle on the same 8 m module: a north port and a west port meeting at a swept bend on its saddles, so the water main can follow the pad boundary.
Flame Trench Section (Rocket Launch Pad and Gantry)
An 8 m section of flame trench: two 2.6 m concrete walls with a coping lip and a scorched lining, a sloped channel floor 3.4 m across, a drain sump and deluge nozzles along both kerbs. Ported at both ends so the trench runs as far as the pad needs.
Hardstand Module (Rocket Launch Pad and Gantry)
An 8 m hardstand module for parking transporters, carts and skids beside the pad: a gravel bed, a laid concrete deck with joint lines and a yellow kerb down each side. Ported on all four edges to the same grid as the apron.
Pad Apron Module (Rocket Launch Pad and Gantry)
An 8 m square reinforced concrete pad apron module, 180 mm thick, with cast joint strips, a central drain channel and four bolt groups. Edge ported north, south, east and west so an apron of any size tiles out of repeats.
Scorched Apron Module (Rocket Launch Pad and Gantry)
The pad apron module in flame washed dark concrete, with soot patches where the exhaust plume has swept the slab. Same 8 m module and the same four edge ports, so it drops straight into an apron built from the clean tiles.
Laid Mat Run (Desert Mosque and Madrasa Courtyard)
Free 3D model of a 3 m laid reed mat run for a desert mosque prayer hall: woven reeds with binding cords and a bound edge, 0.06 m deep.
AnimatedMadrasa Study Cell Front (Desert Mosque and Madrasa Courtyard)
Free 3D model of a madrasa study cell front for a desert courtyard: a 3 m wall bay with a pointed doorway, a banded cedar door that swings, a grilled light and tile panels.
Water Channel Runnel (Desert Mosque and Madrasa Courtyard)
Free 3D model of a 3 m water channel and runnel module for a desert mosque courtyard: a tiled cut with dressed kerbs, a still water surface and a stop at each joint.
Carved Plaster Band (Desert Mosque and Madrasa Courtyard)
Free 3D model of a carved plaster band for a desert mosque interior: a 3 m run of geometric strapwork and rings between two mouldings, 0.42 m deep.
Painted Ceiling Coffer (Desert Mosque and Madrasa Courtyard)
Free 3D model of a painted and gilded ceiling coffer for a desert mosque or madrasa: a 1.5 m cedar panel with a geometric star field and a brass boss.
Tiled Dado Panel Run Turquoise (Desert Mosque and Madrasa Courtyard)
Free 3D model of a glazed tile dado panel run in turquoise and cobalt for a desert mosque wall: the same 3 m eight point star field, reglazed for a second range.
Tiled Dado Panel Run (Desert Mosque and Madrasa Courtyard)
Free 3D model of a glazed tile dado panel run for a desert mosque wall: a 3 m field of eight point stars in cobalt, turquoise and white on a skirting and a capping course.
Minaret Balcony (Desert Mosque and Madrasa Courtyard)
Free 3D model of a minaret balcony for a desert mosque: a muqarnas corbelled ring carrying a deck with eight turned cedar lattice panels and a stone rail.
Minaret Cap (Desert Mosque and Madrasa Courtyard)
Free 3D model of a minaret cap for a desert mosque: a panelled octagonal lantern under a ribbed turquoise dome with a brass finial, 2.64 m tall.
Muqarnas Corbel Block (Desert Mosque and Madrasa Courtyard)
Free 3D model of a muqarnas corbel block for a desert mosque kit: four tiers of stepped plaster cells oversailing a sandstone back, with a moulded shelf over them.
Minaret Shaft Section (Desert Mosque and Madrasa Courtyard)
Free 3D model of a stackable octagonal minaret shaft section, 3 m tall and 1.92 m across, with panelled faces, tile insets and a moulded band of diamond bosses.