Free models · Game-ready GLB
Animated
Every stylized model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
424 free GLB models
City Bus Red Livery (Bus Station and City Transit)
The 12 m city bus repainted into the second house livery, red over the same yellow waist stripe. The geometry, the doors and the wheels are identical to the blue bus.
Double Decker Bus (Bus Station and City Transit)
An 11 m double decker on the same chassis: two glazed decks, a 4.3 m roofline, one kerb side door at the front and a second amidships, and the same rolling wheels. The internal staircase is not modelled, because nothing outside the shell would show it.
Trolleybus (Bus Station and City Transit)
The 12 m city bus fitted for overhead wire: a roof gantry and two trailing collector poles on top of the same shell, with the same two sliding doors and four rolling wheels. The poles are rigid and do not swing or track the wire.
City Bus Single Decker (Bus Station and City Transit)
A 12 m low floor city bus in the pack neutral blue livery: a full glasshouse on both sides, two kerb side sliding door leaves, wheel arch eyebrows over both axles, a roof air handling pod and a route blind over the windscreen. Four wheels on their own axle pivots.
Articulated Bus (Bus Station and City Transit)
An 18 m articulated bus: two hull sections joined by a ribbed concertina, three axles, three kerb side sliding doors and glazing that stops either side of the joint. The turntable inside the concertina is solid and does not bend, because a rigid node cannot articulate it.
Weather Station (Wind and Solar Energy Farm)
A tripod weather station 3.3 m high: a logger box, a small solar panel, a rain gauge, a wind vane and a cup anemometer that turns at the top of the mast.
Tool Crate (Wind and Solar Energy Farm)
A 1.2 m site tool crate in safety yellow with charcoal corner bands and a hasp, its lid hinged along the back edge so it lifts open.
Cable Drum (Wind and Solar Energy Farm)
A 1.7 m cable drum on its chocks, wound with charcoal power cable between grey flanges, with a blank rating plate on the side. The drum turns on its own axle.
Site Service Van (Wind and Solar Energy Farm)
A white service van for the site team: a 5.2 m panel van with a glazed cab, a roof beacon, a livery panel left blank and four road wheels that roll.
Site Office Portacabin (Wind and Solar Energy Farm)
A 6.4 m site office portacabin: a white unit with a yellow waistband, three glazed windows, a step up to the door and a fire point plate, for the people who run the farm.
Battery Storage Container (Wind and Solar Energy Farm)
A 6 m battery energy storage container: a corrugated white unit with a side mounted cooling pack, fire and hazard plates and two end doors on their own hinges.
Control Cabin Unit (Wind and Solar Energy Farm)
The site control cabin: a 4 m walk in kiosk with a yellow eaves band, a ventilation grille, a fire point plate, a step at the door and a single leaf that swings open.
Switchgear Cabinet Run (Wind and Solar Energy Farm)
A run of three medium voltage switchgear cubicles on a shared plinth, each with its mimic panel, a rain hood over the lot and three front doors that swing open.
Site Fence Gate (Wind and Solar Energy Farm)
The vehicle gate in the perimeter fence: a 3.8 m braced mesh leaf with a warning plate, hung on the same 4 m module as the fence panels and swinging open on its hinge post.
String Combiner Box (Wind and Solar Energy Farm)
A DC string combiner box on two posts: a 1 m grey enclosure with a drip hood, four cable glands underneath and a front door that opens on its own hinge.
Solar Inverter Cabinet (Wind and Solar Energy Farm)
A string inverter cabinet: a 2.1 m grey enclosure on a plinth with a rain hood, cooling louvres, a hazard plate and two front doors that swing open on their own hinges.
Solar Tracker Row (Wind and Solar Energy Farm)
A single axis tracker row: four modules clamped to a 9.4 m torque tube on three piers, with the drive cabinet at the end. The whole row tilts about the tube as one node.
Turbine Transport Trailer (Wind and Solar Energy Farm)
A low loader trailer section for turbine parts: an 11 m deck on a gooseneck with a kingpin plate, two wheeled axles that roll, yellow stanchions and a red rear marker board.
Vertical Axis Wind Turbine (Wind and Solar Energy Farm)
A 5 m vertical axis wind turbine on a cast base: three straight white aerofoil blades held off a steel spindle by struts, turning about the mast. The machine for a yard or a roof where a rotor cannot go.
Met Mast With Instruments (Wind and Solar Energy Farm)
A 21 m triangular lattice met mast: braced legs on three pad feet, instrument booms carrying a wind vane, a radiation shield and a logger cabinet, and a cup anemometer that turns at the top.
Turbine Access Door Panel (Wind and Solar Energy Farm)
The access door panel from a turbine tower base: a white wall section with a steel canopy, warning plates and a grey steel leaf that swings open on its own hinge node.
Wind Turbine Tower (Wind and Solar Energy Farm)
A three blade utility wind turbine: a 28 m tapered white tower on a base collar, a nacelle with its yaw ring and cooling face, and a 24 m rotor that turns about the nacelle axis.
Turbine Nacelle and Hub (Wind and Solar Energy Farm)
The nacelle and hub of a utility turbine sat on its yellow transport cradles at ground level, with three blade root cans on the hub and the rotor still free to turn.
Farm Scale Wind Turbine (Wind and Solar Energy Farm)
A farm scale three blade turbine, 12.5 m to the hub with an 11 m rotor: the machine a single farm, depot or island grid runs, at about half the tower of the utility model.