Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
6,273 free GLB models
Bar Counter Corner (Nightclub and DJ Booth)
A square corner piece for the counter run: one 650 mm bay with the same panelled front, foot rail and stone top, ported on its -X end and its -Z end so a bar turns through 90 degrees without a gap.
Bar Counter Module (Nightclub and DJ Booth)
A 1.5 m bar counter module: a panelled timber front with a brass foot rail, a stainless working deck at 900 mm and an inner shelf, under a pale stone top at 1.1 m that overhangs 100 mm toward the customer. Ports on both ends build a bar run of any length.
Mirror Wall Panel Module (Nightclub and DJ Booth)
A 1.2 by 2.6 m mirrored wall module: a full height mirror pane in a dark frame with aluminium stiles, magenta reveal strips top and bottom and a recessed kick, ported on both stiles so panels run into a continuous wall.
LED Dance Floor Tile, White (Nightclub and DJ Booth)
The 1 m LED dance floor tile with a white diffuser face, the third colour in a three way chequer and the one a floor reads as when the pattern is off.
LED Dance Floor Tile, Cyan (Nightclub and DJ Booth)
The 1 m LED dance floor tile with a cyan diffuser face, for laying a chequered floor that reads as a pattern rather than one flat colour.
LED Dance Floor Tile (Nightclub and DJ Booth)
A 1 m LED dance floor tile 80 mm deep: a dark tray with a magenta diffuser face set into a brushed aluminium frame, ported on all four edges so tiles lay out into a floor of any size.
Light Bar on a Stand (Nightclub and DJ Booth)
A four head par bar on a wind up tripod stand: a 1.3 m T bar at 1.6 m carrying four cans angled down at the floor, each with a coloured gel frame in magenta, cyan, amber and pale.
Smoke Machine (Nightclub and DJ Booth)
A club smoke machine: a dark cased hazer on four fixed wheels with a real flared nozzle on the front, a control panel with its ready lamp, side handles and a pale fluid bottle stood on the case.
AnimatedDisco Ball on a Motor (Nightclub and DJ Booth)
A 520 mm mirror ball hung under its rotator: the faceted ball on a capped spindle, a drop rod and a dark motor box with its indicator and a shackle on top for the truss clamp.
Laser Effect Unit (Nightclub and DJ Booth)
A housed laser effect: a cast aluminium box with the aperture window and a fan of five emitter lenses behind it, an interlock key panel, a yoke on both cheeks and a rubber base plate.
AnimatedMoving Head Light (Nightclub and DJ Booth)
A moving head spot: a base with a display panel and hook clamp rails, a yoke that pans on it and a head that tilts in the yoke behind a cyan tinted lens. About 750 mm tall at level.
UV Blacklight Bar (Nightclub and DJ Booth)
A 1.1 m ultraviolet wash bar: a single long tube in a dark reflector housing with end caps, on a yoke and hook clamp. Modelled in the deep magenta a UV tube actually reads as.
Strobe Bar (Nightclub and DJ Booth)
A 1.1 m four cell strobe bar: four lamp windows behind pale diffusers in a dark extrusion, with a yoke and hook clamp on top for clamping to a truss chord.
Lighting Truss, Corner Block (Nightclub and DJ Booth)
A 90 degree corner block for the truss grid: a 300 mm cube with a half metre arm on the -X side and another on the -Z side, spigot plates on both, so a rectangular grid closes at every corner.
Hanging Speaker on a Fly Frame (Nightclub and DJ Booth)
The mid cabinet in a fly frame: the box slung between two steel straps under a bumper bar with shackles at both pick points, for flying delay boxes off the truss over the floor.
Speaker Stack Mid Cabinet (Nightclub and DJ Booth)
A two way top box for the head of a stack: a 700 mm trapezoidal enclosure with a horn flare over the compression driver behind the grille, pale banding on the baffle and handles on both cheeks.
Lighting Truss, Straight Bay (Nightclub and DJ Booth)
A 2 m bay of 300 mm square box truss: four chords with a zigzag brace on every face, spigot plates and cone spigots at both ends and a magenta bay label under each plate.
Speaker Stack Sub Cabinet (Nightclub and DJ Booth)
A double 18 inch club subwoofer: a 1.15 m birch enclosure on skid runners with two tuned ports through the baffle, a grille over the mouth, a pale band along the bottom of the baffle and a recessed connector plate on the back.
Backdrop LED Panel Module (Nightclub and DJ Booth)
A 1 m square LED video panel for the wall behind the booth: a cast frame 100 mm deep with a magenta diffuser face ribbed on the pixel pitch, and corner castings on all four edges so panels tile across and up.
Riser Platform Module (Nightclub and DJ Booth)
A 2 by 1 m stage riser at 400 mm: a dark non slip deck in an aluminium edge trim on a folding steel frame with levelling feet, ported on all four edges so risers tile into a booth stage of any size.
Record Crate (Nightclub and DJ Booth)
A 360 mm wooden record crate packed with fourteen 12 inch sleeves in pale, magenta, cyan, amber and grey, leaning back the way a browsed crate does, with cut handholes in both ends.
Backdrop LED Panel Module, Cyan (Nightclub and DJ Booth)
The 1 m backdrop LED panel with a cyan diffuser face, for chequering a video wall two ways so the backdrop reads as a pattern rather than a flat sheet.
DJ Headphones on the Desk (Nightclub and DJ Booth)
A pair of closed back DJ headphones lying on the desk: a padded metal headband with the pale top pad, swivel forks and two earcups with magenta ear pads facing in.
DJ Booth Monitor Wedge (Nightclub and DJ Booth)
A booth monitor: a 400 mm wedge on rubber runners with a perforated grille over the coaxial driver and a pale band along the baffle, aimed up at the DJ from the end of the desk.