Free models · Game-ready GLB
Modern
Every realistic modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
8,628 free GLB models
Parcel stack, small (Parcel Depot and Sorting Hall)
Three taped cartons stacked and squared up as a sorter leaves them, 0.5 m across and 0.9 m tall, with blank cream address labels and red, blue and charcoal tape across the seams.
AnimatedRoll cage with rolling castors (Parcel Depot and Sorting Hall)
Tall two sided roll cage 1.8 m high on a charcoal deck with a mesh back, folding mesh sides, a charcoal strap rail across the front and four castors that turn, the trolley a driver actually wheels into a van.
Sort tray rack (Parcel Depot and Sorting Hall)
Steel picking rack 1.26 m wide and 1.85 m tall with five tilted shelves of blue and red sorting trays, a charcoal kick plate and a blank route card strip on each shelf edge, for the manual sort beside a chute.
Parcel cage, empty (Parcel Depot and Sorting Hall)
The same parcel cage swept out and ready to load: bare charcoal base, mesh sides, mid shelf and route card holder, for a staging row waiting on a sorting line.
Parcel cage, loaded (Parcel Depot and Sorting Hall)
Depot parcel cage 0.82 m by 0.72 m and 1.56 m tall: a welded galvanised mesh box on a charcoal base with a mid shelf, a blue route card holder and four castors, loaded with taped cartons and a poly wrapped bundle.
Post bag on a wheeled frame (Parcel Depot and Sorting Hall)
Standalone mail bag frame as it stands in a depot aisle: a tubular galvanised frame on castors with a filled red post bag, a charcoal tie strap across its neck and a blank cream destination card in the holder.
Sorting chute with a full bag (Parcel Depot and Sorting Hall)
The same chute and frame with the bag filled and its neck standing open, plus two parcels resting on the slide, for a line that has been running. Identical footprint, lip height and intake port.
AnimatedLabel printer and applicator (Parcel Depot and Sorting Hall)
Print and apply labeller on its own legs beside a line: a grey cabinet with a cream printer head, an exposed label roll, a touch screen, and a tamp arm that tilts down to apply a label to the parcel below it.
Sorting chute with bag frame (Parcel Depot and Sorting Hall)
Discharge chute off a diverter: a galvanised slide with grey side walls and a yellow lip, on charcoal legs, running down into a tubular bag frame with a red mail bag hanging in it and a blank cream destination card.
AnimatedParcel scanner arch over a belt (Parcel Depot and Sorting Hall)
Reading tunnel over a powered 2 m belt module: a blue portal 2.1 m tall carrying a six sided camera head, lit reading strips down both jambs, a cable tray along the top and a status screen on a bracket, ported as a standard line module.
AnimatedWeigh and dimension station (Parcel Depot and Sorting Hall)
In line weighing and cubing station on a 2 m belt module: a recessed weigh deck on four load cells, a slim light curtain gantry reading the parcel's height and width, and a pedestal display facing the operator.
Conveyor leg and support frame (Parcel Depot and Sorting Hall)
Standalone galvanised support trestle 0.9 m wide and 0.7 m tall with a bolted top channel, a diagonal brace each side and levelling feet, for carrying a conveyor module across a gap or picking up a joint between two runs.
AnimatedDiverter arm conveyor unit (Parcel Depot and Sorting Hall)
Powered 2 m belt module with a pivoting diverter arm over it: a grey drive head on the side guide, a yellow banded paddle that sweeps parcels across the belt, and a side port at 0.76 m so a sorting chute lands under the discharge.
AnimatedGravity roller conveyor, 2 m section (Parcel Depot and Sorting Hall)
Unpowered roller bed 2 m long on the same frame, legs and ports as the powered modules: seven galvanised rollers at 0.28 m centres, each turning on its own axis, for a hand fed spur off a sorting line.
AnimatedPowered belt conveyor, 2 m straight (Parcel Depot and Sorting Hall)
Straight powered parcel conveyor module 2 m long and 0.9 m wide with its belt top at 0.76 m: a grey frame on charcoal legs with levelling feet, galvanised side guides and a turning drum at each end. Ports at both ends so a line repeats.
AnimatedPowered belt conveyor, 4 m straight (Parcel Depot and Sorting Hall)
The same powered conveyor at 4 m, for a long run down a sorting hall with fewer joints. Identical width, belt height, legs and end drums, ported on its own half length.
AnimatedIncline belt conveyor, 1.5 m rise (Parcel Depot and Sorting Hall)
Cleated incline conveyor climbing 1.5 m over a 3 m run at 26.6 degrees, feeding a sorting line from a lower infeed. Grey frame, charcoal cleats across the belt, adjustable legs and a turning drum at each end.
Powered belt conveyor, 90 degree curve (Parcel Depot and Sorting Hall)
Quarter turn belt module on a 1 m centre line radius, turning a sorting line 90 degrees to the left. It enters running toward -Z and leaves running toward -X, on the same 0.76 m belt height and the same end ports as the straights.
University Teaching Floor (University Lecture Hall and Campus)
A working university teaching floor: a six tier raked lecture theatre of bench desk rows and stepped aisle facing a projection screen, whiteboards and a lectern under a ceiling projector; a corridor of lockers, noticeboards, benches and a drinking fountain; a teaching...
Corridor Panel Radiator (University Lecture Hall and Campus)
A 1.2 m double panel corridor radiator on wall brackets at 120 mm: finned panels with a top grille, a thermostatic head one end and a lockshield the other.
Campus Planter with Foliage (University Lecture Hall and Campus)
A 470 mm tapered planter with a soil disc and nine broad leaf blades, for softening a corridor, an atrium or a break-out space.
Teaching Floor Stair Flight with Handrail (University Lecture Hall and Campus)
A 1.4 m wide half flight of eight risers climbing 1.4 m: vinyl treads with marked nosings on closed strings, a landing nib at the top and a tube handrail over a glazed balustrade.
Suspended Ceiling Light Panel (University Lecture Hall and Campus)
A 1.2 m by 600 mm suspended light panel: a brushed tray with a flat diffuser, two gear boxes and a pair of suspension wires with ceiling rosettes 440 mm above the origin.
Teaching Floor Tile, Wayfinding Colour (University Lecture Hall and Campus)
The same 2.4 m floor module with the seam border in the wayfinding colour, for marking a route, a threshold or a break-out zone.