Free models · Game-ready GLB
Realistic
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
9,805 free GLB models
Sharpening station, 0.7 m (Woodworking Workshop and Joinery)
Sharpening bench in pine: a charcoal stone pond holding a coarse and a fine waterstone, a leather strop on its block, a honing guide, a water jug and a lower shelf of stone boxes, set at the height a joiner touches up an iron.
Bench plane, 360 mm (Woodworking Workshop and Joinery)
Number five jack plane: a flat steel sole, a blue japanned body, the iron and red lever cap set at the mouth, a timber tote and front knob, sitting on its sole the way it is left on the bench.
Mallet and chisel set on a tray, 0.5 m (Woodworking Workshop and Joinery)
A joiner's mallet standing in a shallow pine tray with three bench chisels laid beside it and a marking gauge: handles, ferrules and ground bevels modelled, for dressing a bench or an assembly table mid job.
Clamp rack with sash clamps, 1.8 m (Woodworking Workshop and Joinery)
Steel A frame clamp rack on castors holding six 1.5 m sash clamps: each clamp is a steel bar with a red head casting, a sliding tail on its pin and a screw with a timber T handle, racked the way a shop keeps them beside the assembly table.
AnimatedRolling tool chest, 1 m (Woodworking Workshop and Joinery)
Red seven drawer tool chest on four castors: a timber worktop, steel drawer pulls on every front, a side handle and a lower cupboard, with every drawer opening on its runners.
Sawhorse pair, 1 m (Woodworking Workshop and Joinery)
Two site built timber sawhorses with 1 m top beams, splayed legs, gussets and a lower tie, set out as a pair at working distance so a board or a door can be laid across them.
Tool wall panel with hand tools, 1.6 m (Woodworking Workshop and Joinery)
Wall hung tool board 1.6 m by 1 m: a pale ply panel in a timber frame, carrying four bench chisels on their rack, a tenon saw on its pegs, a bench plane on its shelf, two try squares, a mallet and two F clamps, each tool modelled as the real thing.
AnimatedJoiner's workbench with vice, 2 m (Woodworking Workshop and Joinery)
Laminated hardwood bench 2 m long on square legs and stretchers: eight glued top boards with a row of round dog holes, a front apron, a lower pine shelf and a cast front vice whose timber faced jaw slides out on its screw.
Assembly table, 1.8 m (Woodworking Workshop and Joinery)
Low assembly table 1.8 m by 1.1 m on a blue welded frame: a birch ply top on a torsion box grid with a field of dog holes, a lower shelf carrying two clamps and adjustable feet, built at 800 mm so a carcass can be squared up on it.
AnimatedMobile machine base, 0.8 m (Woodworking Workshop and Joinery)
Adjustable steel machine base: a welded rectangular frame with four corner brackets, a yellow foot lever and four castor wheels, so a planer or a band saw can be rolled out of the way and set down again.
AnimatedRouter table, 0.95 m (Woodworking Workshop and Joinery)
Enclosed router table: a blue cabinet with a cream laminated top and a steel insert plate, a split charcoal fence with its dust port and guard, a start and stop station on the front, and the router cutter turning in the opening.
AnimatedWood lathe with tool rest, 1.9 m (Woodworking Workshop and Joinery)
Cast bed lathe on two green pedestals: twin steel ways, a headstock with the drive spindle, a tailstock on its quill, a charcoal banjo carrying the steel tool rest and a turned blank between centres that spins with the spindle.
AnimatedTwin bag dust extractor, 2.05 m (Woodworking Workshop and Joinery)
Blue twin bag extractor on a charcoal base with four castors: a fan housing over the motor, a 200 mm inlet with its flexible cuff, a steel hoop frame carrying the cream filter bag above and the collection bag below, and the motor fan turning on top.
AnimatedDisc and belt sander on a stand, 1.2 m (Woodworking Workshop and Joinery)
Blue bench sander on a grey steel stand: a 300 mm cream sanding disc behind its charcoal guard with a tilting steel table, a tilting belt platen on the left with its drums, a dust port under each and a start and stop station.
AnimatedFloor standing pillar drill, 1.85 m (Woodworking Workshop and Joinery)
Cast base, a 1.6 m steel column, an adjustable table on its bracket and a grey head with a red belt cover: the quill feeds down on its three ball handles and the chuck and drill bit turn with it.
AnimatedSpindle moulder, 1.1 m (Woodworking Workshop and Joinery)
Green spindle moulder: a cast table with its insert ring over a closed cabinet, a split cream fence on a charcoal body, a yellow ring guard, the rise and fall handwheel and a start and stop station, with the spindle and its cutter block turning in the opening.
AnimatedOpen frame band saw, 2.1 m (Woodworking Workshop and Joinery)
Green cast frame band saw: a heavy plinth, a full height column carrying two exposed 400 mm wheels with charcoal tyres, a tilting steel table with its fence, an adjustable blade guard on its post, a dust port at the lower wheel and a start and stop station.
Planer thicknesser, 1.65 m (Woodworking Workshop and Joinery)
Over and under planer thicknesser in red: infeed and outfeed cast tables set either side of the cutterblock with the infeed 2 mm low, a long steel fence at the back, a yellow bridge guard, a rise and fall handwheel with its scale, an extraction hood and a start and stop station.
AnimatedSliding mitre saw on a folding stand, 1.9 m (Woodworking Workshop and Joinery)
Red sliding mitre saw on a grey folding stand: splayed legs under two top rails, a roller support wing at each end, a charcoal base with a rotating mitre table and a fence, and a saw head on its rear pivot that tilts down through the cut and back.
Dust extraction duct run, 2 m (Woodworking Workshop and Joinery)
Two metre galvanised extraction duct 220 mm across with flanged joints, a bolted hanger strap and a blanked branch takeoff, ported at both ends so a run repeats across the shop to the extractor.
AnimatedRoller door module, 4 m (Woodworking Workshop and Joinery)
Full height timber delivery entrance module: a 3.2 m by 3.2 m opening in a cream clad surround, charcoal guide channels, red impact posts, a shutter hood and a slatted blue curtain that lifts clear of the opening.
AnimatedCabinet table saw with extension table, 1.6 m (Woodworking Workshop and Joinery)
Cabinet saw on a blue body: a cast steel top split by the blade slot, a lattice extension table on the right, front and rear rails with a yellow rip fence, a riving knife under a crown guard, rise and tilt handwheels, a start and stop station and a dust port at the back.
Workshop ceiling light bar, 2.4 m (Woodworking Workshop and Joinery)
Suspended twin tube light 2.4 m long: a grey steel channel on two drop rods with a charcoal reflector and two cream diffuser tubes, for lighting a bench run or a machine bay.
Workshop floor tile with walkway markings, 4 m (Woodworking Workshop and Joinery)
The same 4 m concrete floor module with a painted safety yellow walkway lane down it, standing 5 mm proud of the slab. Identical edge ports, so it lays into the same grid.