Free models · Game-ready GLB
Exterior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
8,322 free GLB models
Torn outer panel section (UFO Crash Site and Recovery Facility)
A 2.4 m outer skin panel buckled by the impact: the plate is folded through two waves, its edges are ragged where the fasteners let go, the sheet has real thickness at the tear and three internal ribs are still riveted to the back.
Classic saucer craft, gear stowed (UFO Crash Site and Recovery Facility)
The same 12 m disc craft with its landing legs folded into the bays and the bay doors closed, resting on cradles or shown in flight.
Triangular craft (UFO Crash Site and Recovery Facility)
A 14 m black triangle: a rounded-corner delta planform with a hard chine, a shallow domed upper surface, raised piping panel divisions, a central ventral aperture, three recessed corner emitters on landing pads and a dorsal spine housing with a canopy strip.
Bio-organic pod craft (UFO Crash Site and Recovery Facility)
A 5.7 m seamless pod craft: a smooth boxed-oval hull with a dorsal ridge, four glowing gill vents on each flank, a ventral membrane window, a nose sensor node and three organic ground nubs instead of landing gear.
Drone probe sphere, deployed (UFO Crash Site and Recovery Facility)
The same probe split at its equator, showing the inner core, six radial struts and an extended sensor mast.
Damaged scout disc (UFO Crash Site and Recovery Facility)
A 6.4 m scout disc broken open by an impact: a whole sector of the rim is torn away, the double hull skin shows its thickness at the tear, ring frames and ribs stand exposed in the gap, conduits hang loose, three skin plates are peeled back and the canopy is shattered.
Classic saucer craft, landed (UFO Crash Site and Recovery Facility)
A recovered 12 m disc craft standing on three deployed landing legs: a concave underside with a ventral drive iris, a machined rim band carrying sixteen lights, a panelled upper deck and a raised tinted cupola. The three landing bays are open with their doors swung down.
Recovered engine core assembly (UFO Crash Site and Recovery Facility)
A 2.7 m drive core lifted out of a hull and set on its transport frame: a vertical toroid with two glowing race rings, a gimballed inner sphere in a steel yoke, four support legs and two conduits cut where they left the airframe.
Drone probe sphere (UFO Crash Site and Recovery Facility)
A 1.5 m spherical probe on four short legs: a polished shell with an equatorial seam band, a lit ring, three sensor blisters and a forward aperture.
Pad edge wind baffle (Hover Cars and Flying Vehicles)
A five metre curved wind baffle screen with six louvre slats, a lit top rail and splayed feet, for sheltering a landing pad edge.
Skylane direction gantry sign (Hover Cars and Flying Vehicles)
A five metre cantilever direction sign with a framed board, three lit legend bands, a chevron and an under-board lamp bar.
Kerbside drop-off module (Hover Cars and Flying Vehicles)
A six metre kerbside module with a raised footway, boarding shelter, bollards, bay markings and lane ports on the road edges.
Skylane air traffic gantry (Hover Cars and Flying Vehicles)
A thirteen metre span traffic gantry with a lattice cross beam, four signal heads, sensor pods and a lit lane band.
Passenger queue barrier (Hover Cars and Flying Vehicles)
A three metre three post queue barrier with two lit rails, beacon caps and a hazard plate, for ranks and boarding lines.
Hover parking stack frame (Hover Cars and Flying Vehicles)
A three level open parking stack frame with grid decks, edge guards, glowing bay strips and a head canopy.
Hover service bay with lift deck (Hover Cars and Flying Vehicles)
An open four column service bay with a scissor lift deck at 1.15 m, hazard guards, overhead light rails and a rear tool board.
Repulsor charging pylon (Hover Cars and Flying Vehicles)
A kerbside charging pylon with an inductive coil head, a swing boom and a drop coupler over the bay, plus a lit status panel.
Hover lane beacon, amber lane closure (Hover Cars and Flying Vehicles)
The lane beacon with an amber head instead of a cyan one, for marking a closed or diverted lane in the same row.
Hover craft docking cradle (Hover Cars and Flying Vehicles)
A splayed docking cradle whose padded saddle carries a parked hover craft at 1.15 m, with alignment guides and a service coupler column.
Hover lane beacon (Hover Cars and Flying Vehicles)
A four metre skylane beacon mast with a glowing coil ring head, sensor pod and weighted base.
Hover landing pad tile (Hover Cars and Flying Vehicles)
A six metre landing pad tile with concentric touchdown rings, a cross marking, edge approach lights and lane ports on all four edges.
Repulsor road plate, lane terminator (Hover Cars and Flying Vehicles)
The repulsor road plate closed off by a stop block with a warning bar and two lit posts, ending a lane run.
Repulsor road plate, quarter turn (Hover Cars and Flying Vehicles)
The repulsor road plate with its induction arcs swept through a quarter turn, joining a south lane port to an east one.
Repulsor road plate, four way (Hover Cars and Flying Vehicles)
The repulsor road plate as a four way junction with crossing induction arcs and a glowing conflict ring.