Free models · Game-ready GLB
Animated
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,425 free GLB models
AnimatedHand pallet truck (Parcel Depot and Sorting Hall)
Hydraulic hand pallet truck with 1.15 m forks, a grey pump body, a yellow hood, a red release lever on the tiller and rolling steer and load wheels, the trolley every depot moves its pallets with.
AnimatedBox lorry trailer (Parcel Depot and Sorting Hall)
Curtainless box trailer 8.5 m long and 4 m tall on a twin axle bogie: cream panels with a blue band, a kingpin plate, wind down landing legs, side guards and a pair of rear doors that swing open at a dock.
AnimatedParcel delivery van, doors open (Parcel Depot and Sorting Hall)
The blue van posed as it stands at a dock: the kerb side door slid fully back on its track and both rear doors swung out, showing the load area with a part load of cartons on the deck. The four wheels still turn.
AnimatedParcel delivery van, red livery (Parcel Depot and Sorting Hall)
The same parcel van in the depot's second invented livery: red panels with a cream side panel and a yellow accent band. Identical body, doors, arches and wheels, so a yard reads as a mixed fleet.
AnimatedParcel delivery van, blue livery (Parcel Depot and Sorting Hall)
Semi bonneted parcel van 5.7 m long with a high cargo body: blue panels with a cream side panel and accent band, modelled wheel arches, a sliding kerb side door and twin rear doors that open. No maker or courier branding anywhere.
AnimatedRoll cage with rolling castors (Parcel Depot and Sorting Hall)
Tall two sided roll cage 1.8 m high on a charcoal deck with a mesh back, folding mesh sides, a charcoal strap rail across the front and four castors that turn, the trolley a driver actually wheels into a van.
Sorting chute with a full bag (Parcel Depot and Sorting Hall)
The same chute and frame with the bag filled and its neck standing open, plus two parcels resting on the slide, for a line that has been running. Identical footprint, lip height and intake port.
AnimatedLabel printer and applicator (Parcel Depot and Sorting Hall)
Print and apply labeller on its own legs beside a line: a grey cabinet with a cream printer head, an exposed label roll, a touch screen, and a tamp arm that tilts down to apply a label to the parcel below it.
Sorting chute with bag frame (Parcel Depot and Sorting Hall)
Discharge chute off a diverter: a galvanised slide with grey side walls and a yellow lip, on charcoal legs, running down into a tubular bag frame with a red mail bag hanging in it and a blank cream destination card.
AnimatedParcel scanner arch over a belt (Parcel Depot and Sorting Hall)
Reading tunnel over a powered 2 m belt module: a blue portal 2.1 m tall carrying a six sided camera head, lit reading strips down both jambs, a cable tray along the top and a status screen on a bracket, ported as a standard line module.
AnimatedWeigh and dimension station (Parcel Depot and Sorting Hall)
In line weighing and cubing station on a 2 m belt module: a recessed weigh deck on four load cells, a slim light curtain gantry reading the parcel's height and width, and a pedestal display facing the operator.
AnimatedDiverter arm conveyor unit (Parcel Depot and Sorting Hall)
Powered 2 m belt module with a pivoting diverter arm over it: a grey drive head on the side guide, a yellow banded paddle that sweeps parcels across the belt, and a side port at 0.76 m so a sorting chute lands under the discharge.
AnimatedGravity roller conveyor, 2 m section (Parcel Depot and Sorting Hall)
Unpowered roller bed 2 m long on the same frame, legs and ports as the powered modules: seven galvanised rollers at 0.28 m centres, each turning on its own axis, for a hand fed spur off a sorting line.
AnimatedPowered belt conveyor, 2 m straight (Parcel Depot and Sorting Hall)
Straight powered parcel conveyor module 2 m long and 0.9 m wide with its belt top at 0.76 m: a grey frame on charcoal legs with levelling feet, galvanised side guides and a turning drum at each end. Ports at both ends so a line repeats.
AnimatedPowered belt conveyor, 4 m straight (Parcel Depot and Sorting Hall)
The same powered conveyor at 4 m, for a long run down a sorting hall with fewer joints. Identical width, belt height, legs and end drums, ported on its own half length.
AnimatedIncline belt conveyor, 1.5 m rise (Parcel Depot and Sorting Hall)
Cleated incline conveyor climbing 1.5 m over a 3 m run at 26.6 degrees, feeding a sorting line from a lower infeed. Grey frame, charcoal cleats across the belt, adjustable legs and a turning drum at each end.
AnimatedTeaching Room Door Module with Room Number Sign (University Lecture Hall and Campus)
A 1.2 m by 2.8 m wall module with a 920 mm teaching room door: a lined opening, a hinged leaf with a vision panel, lever handles both sides and a kick plate, and a room number sign on the wall beside it.
AnimatedThree Stream Recycling Station (University Lecture Hall and Campus)
A three stream recycling station at 980 mm: paper, mixed and general bins on a common base rail, each with a coloured hinged lid, a shaped aperture and a signage panel.
AnimatedStudent Locker Bank, Eight Door (University Lecture Hall and Campus)
A 1.44 m student locker bank: two tiers of four doors on a recessed plinth, each leaf with a pull, a cam lock, louvred vents and a coloured number plate.
AnimatedCampus Vending Machine (University Lecture Hall and Campus)
A 920 mm glazed front vending machine: four decks of spirals and product behind a full height hinged glass door, with a keypad column, a coloured header and a delivery bin.
AnimatedChemical Store Cabinet (University Lecture Hall and Campus)
A 920 mm double door chemical store cabinet: a vented steel body with a bunded sump tray and three shelves, a hazard diamond and a department label, on a recessed plinth.
AnimatedTeaching Lab Fume Cupboard (University Lecture Hall and Campus)
A 1.25 m teaching fume cupboard: a glazed chamber with a small sink and tap over a cupboard base, a sloped fascia, an extract duct and an airflow alarm, with a counterbalanced sash in brushed guides.
AnimatedTeaching Lab Island Bench, Double Sided (University Lecture Hall and Campus)
A 2.4 m double sided teaching laboratory island at 900 mm: sinks, taps and socket plates facing both ways off a central service spine, over four cupboards.
AnimatedTeaching Lab Bench with Sink and Service Spine (University Lecture Hall and Campus)
A 2.4 m teaching laboratory wall bench at 900 mm: an epoxy resin top with an upstand, a stainless sink and swan neck tap, a green gas tap, a service spine of socket plates and a reagent shelf over two cupboards.