Free models · Game-ready GLB
Kit
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
8,851 free GLB models
Pallet support bar set (Hardware Store and DIY Warehouse)
Three 1.05 m folded steel pallet support bars with hooked ends, the cross members dropped between a beam pair to carry a pallet whose bearers run the wrong way.
Shop shelving bay 3.0 m (Hardware Store and DIY Warehouse)
A 3.0 m high shop shelving bay on the 1.35 m bay pitch: two slotted uprights, a kicked base deck, cantilever shelves with turned front lips, price rails and a plain back panel.
Shop shelving bay 2.0 m (Hardware Store and DIY Warehouse)
A 2.0 m high shop shelving bay on the 1.35 m bay pitch: two slotted uprights, a kicked base deck, cantilever shelves with turned front lips, price rails and a plain back panel.
Rack row spacer set (Hardware Store and DIY Warehouse)
A pair of 0.3 m row spacers: bolted tube struts with end plates that tie two back to back racking frames together and hold the flue gap open.
Pipe and dowel tube rack (Hardware Store and DIY Warehouse)
A 1.2 m wide upright tube rack: a welded steel frame divided into twelve open compartments by tube dividers, for dowel, conduit, angle and moulding sold by the length.
Sheet material A frame (Hardware Store and DIY Warehouse)
A 2.4 m wide A frame for board and sheet stock: two leaning steel decks with timber batten faces, five vertical dividers and a kerbed foot rail on each side.
Rack safety mesh backing (Hardware Store and DIY Warehouse)
A bay wide rear mesh guard, 1.35 m by 2.2 m: welded mesh in a tubular frame with four bracket clamps that grip the racking uprights behind a pick face.
Pallet rack beam pair (Hardware Store and DIY Warehouse)
A 1.35 m pallet racking beam level: two box section beams 1.1 m apart with hooked end connectors, three hook lugs per end, safety lock pins and a load ledge along each top face.
Rack end panel with sign board (Hardware Store and DIY Warehouse)
A 1.1 m by 2.4 m rack end cladding panel on a light frame with a blank 0.9 m sign board above it, closing the end of a racking run to the shopfloor.
Cantilever rack, double sided (Hardware Store and DIY Warehouse)
The cantilever column with arms on both faces and a full width base foot, so lengths load from either aisle.
Cantilever rack, single sided (Hardware Store and DIY Warehouse)
A 2.6 m single sided cantilever rack column: a bolted base foot, four 0.9 m arms with turned up end stops and a diagonal brace under each arm, for timber lengths and pipe.
Wire mesh rack deck (Hardware Store and DIY Warehouse)
A loose 1.29 m by 0.97 m welded wire rack deck: 100 mm mesh with a folded perimeter wire and three top hat support channels underneath.
Timber rack deck panel (Hardware Store and DIY Warehouse)
A 1.29 m chipboard rack deck: three 18 mm boards carried on two folded steel bearers, the flush deck used across a pallet beam pair for boxed stock.
Pallet rack upright frame 6 m (Hardware Store and DIY Warehouse)
A 6 m pallet racking upright frame: two perforated columns 1.1 m apart, welded baseplates with floor anchors, horizontal ties and a full diagonal bracing lattice.
Pallet rack beam pair with timber deck (Hardware Store and DIY Warehouse)
The 1.35 m beam level fitted with three chipboard deck boards on folded steel bearers, the flush timber shelf used for hand stacked stock.
Pallet rack upright frame 4 m (Hardware Store and DIY Warehouse)
A 4 m pallet racking upright frame: two perforated columns 1.1 m apart, welded baseplates with floor anchors, horizontal ties and a full diagonal bracing lattice.
Pallet rack beam pair with wire mesh deck (Hardware Store and DIY Warehouse)
The 1.35 m beam level fitted with a welded wire mesh deck: 100 mm mesh on three folded support channels, landing on the load ledges of both beams.
Stable Yard (Horse Stables and Equestrian Yard)
Stable yard demonstration: a four-bay aisle with stall bays either side, a tack room and wash bay, horses at the tie rail and in a stall, a muck barrow, hay bales and a trailer parked in the lane. Static layout of pack instances; no rig, collision or navigation data.
Arena And Jump Course (Horse Stables and Equestrian Yard)
Fenced sand arena demonstration: harrowed footing, a boundary rail and letter markers, a three-fence course of an upright, an oxer and a wall, cavaletti and cones on the approach, a mounting block and a horse trotting. Static layout; no rig, collision or navigation data.
Muck Trailer (Horse Stables and Equestrian Yard)
Small tipping muck trailer with a drawbar and single axle.
Jump Store (Horse Stables and Equestrian Yard)
Open-fronted store bay holding spare jump poles and blocks.
Fly Mask (Horse Stables and Equestrian Yard)
Mesh fly mask with ear covers, on a stand-free rest.
Tie Rail (Horse Stables and Equestrian Yard)
Timber tie rail with three tying rings for holding horses on the yard.
Yard Notice Board (Horse Stables and Equestrian Yard)
Covered notice board with pinned sheets and a small roof.