Free models · Game-ready GLB
Modern
Every stylized modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,613 free GLB models
Spare Wheels and Bearings Box (Skate Park and Street Sports)
An open parts box with a set of four spare wheels standing on the lid and a loose bearing beside them. Static.
Pair of Inline Skates (Skate Park and Street Sports)
A pair of aggressive inline skates: hard boot, three ratchet buckles each and four wheels in an aluminium frame. The wheels are modelled into the frame and do not turn.
Skate T Tool (Skate Park and Street Sports)
The T shaped truck tool: three hex sockets on a charcoal body with a screwdriver shank through the middle. Static.
Sports Water Bottle (Skate Park and Street Sports)
A 750 ml squeeze bottle with a ribbed cap, a pull spout and a printed band. Static.
Skate Backpack (Skate Park and Street Sports)
A 25 litre pack with a front pocket, a top flap, a grab loop and two shoulder straps. The board straps are modelled closed and do not open.
Knee and Elbow Pad Set (Skate Park and Street Sports)
A pair of hard shell knee pads with a smaller elbow pad tucked beside each, sleeves and orange straps modelled. Left as a static prop set.
Pair of Skate Shoes (Skate Park and Street Sports)
A pair of flat soled skate shoes: vulcanised sole, padded tongue, suede side panel and three modelled laces each. Static.
Skate Helmet (Skate Park and Street Sports)
A moulded certified-style skate helmet with a turned down front peak, four vent slots let into the shell, a padded rim and a chin strap. Static.
AnimatedFolding Kick Scooter (Skate Park and Street Sports)
A stunt kick scooter with a low charcoal deck, grip plate, teal steering column, foam grips, a rear fender brake and two wheels on their own axle nodes.
AnimatedBMX Park Bike (Skate Park and Street Sports)
A 20 inch BMX: teal tubular frame, four peg axles, riser bars with grips, a slim saddle and two wheels on their own axle nodes. The chain and the drivetrain are modelled as a solid sprocket and do not turn.
AnimatedSkateboard with Teal Wheels (Skate Park and Street Sports)
The complete skateboard with a yellow underside print and teal wheels. Geometry is unchanged.
AnimatedSkateboard with Sunset Graphic (Skate Park and Street Sports)
The complete skateboard with an orange underside print and matching wheels. Geometry is unchanged.
AnimatedSkateboard Resting Deck Down (Skate Park and Street Sports)
The same complete rolled over and resting on its grip tape with the wheels in the air, the way a board is left beside a ledge. Wheels stay separate nodes.
Bowl Corner Wall Section (Skate Park and Street Sports)
A quarter turn of the same bowl wall inside a 3.0 x 3.0 m square, swept about a 1.2 m inner radius. Its two end ports meet straight sections, so four corners and any number of straights close a bowl.
AnimatedComplete Skateboard (Skate Park and Street Sports)
A 81 cm complete: maple deck with a kicked nose and tail, gripped top, printed underside, two trucks and four urethane wheels on their own axle nodes.
Bowl Coping Edge Piece (Skate Park and Street Sports)
A 4 m coping run: a steel coping pipe bedded on a thin painted fillet, sized to the bowl wall deck lip. Its seat port drops onto a bowl straight section's coping port.
Bowl Straight Wall Section (Skate Park and Street Sports)
A 4 m run of bowl wall: a 1.5 m transition from the floor to vertical with a 0.3 m deck lip. End ports chain straights and corners into a closed bowl and the coping port takes the coping edge piece. Sink the ring for a below grade bowl.
Five Step Concrete Stair Set (Skate Park and Street Sports)
The same stair run five risers deep, 0.90 m down to the pad: the street set that a handrail and a five stair gap are built around.
Street Stair Handrail (Skate Park and Street Sports)
A 1.84 m round steel handrail on two footed posts, pitched to the five step stair set. The foot port drops on the pad and the head port on the top landing.
Three Step Concrete Stair Set (Skate Park and Street Sports)
A 2.4 m wide poured stair of three 180 mm risers and 320 mm goings with a 0.5 m top landing and painted nosings. The top port meets a raised pad edge and the rail ports take the matching handrail.
Kinked Grind Rail (Skate Park and Street Sports)
A 3 m round steel rail that kinks up at both ends, the street handrail shape, on two splayed painted A frames.
Flat Grind Rail (Skate Park and Street Sports)
A 3 m round steel grind rail 0.4 m above the ground on two splayed painted A frames with bolted footplates.
Steel Edged Grind Box (Skate Park and Street Sports)
A 2.4 x 0.55 m concrete grind box 0.45 m tall with chamfered top corners, a steel angle capping each grinding edge and a painted band down each side.
Concrete Ledge Block (Skate Park and Street Sports)
A 1.6 x 0.6 m precast ledge 0.4 m tall with one chamfered grinding edge and a sprayed paint band on the face. Drops straight onto the pad.