Free models · Game-ready GLB
Realistic
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
12,634 free GLB models
Organ Bench (Wedding and Chapel Kit)
A 1.1 m padded organ bench: an ivory cushion on an oak seat board over four legs with aprons, side rails and a long stretcher. It sits at the organ console in the scene.
Chapel Pipe Organ (Wedding and Chapel Kit)
A 2.3 m chapel pipe organ, 2.6 m tall: a panelled oak case, two towers with gold finials and eleven gold display pipes between them; a console with two manuals, a music desk, ivory draw stops and a pedal board. The pipes are display only; the organ is static geometry.
White Wedding Aisle Chair (Wedding and Chapel Kit)
A 0.9 m wedding aisle chair: a white moulded seat pad and two white back slats on a pale oak folding frame with seat rails and low stretchers. Chairs line the garden aisle in two columns facing the arch.
Chapel Pulpit (Wedding and Chapel Kit)
A 1.5 m oak wine-glass pulpit: an octagonal drum with fielded panels and a moulded rim on a turned stem and corbel, a slanted book desk facing the preacher, and a three step stone stair with a handrail up the back. It stands at the front of the nave beside the chancel arch.
Chapel Lectern (Wedding and Chapel Kit)
A 1.15 m chapel lectern: a turned oak pedestal with a knop and a head block carrying a slanted desk with a book stop and an open book. The desk falls toward the reader behind it and faces the pews.
Pair of Altar Candlesticks (Wedding and Chapel Kit)
A pair of 0.55 m turned brass altar candlesticks with knops and drip pans, carrying lit ivory candles with gold flame tips, 1.1 m apart and resting on y=0 so the scene sets them on the mensa. They flank the cross.
Chapel Altar Table (Wedding and Chapel Kit)
A 1.8 m chapel altar table, 1.03 m tall: a stone footing, a panelled oak body, a stone mensa slab and a white cloth over the top with side drops and a frontal carrying a plain gold band and fringe. It stands on the dais at the east end.
Chapel Porch Canopy (Wedding and Chapel Kit)
A 2.6 m open porch canopy: four oak posts on stone pads with knee braces, wall plates and tie beams, a gable truss and ridge beam at each end, and a gabled slate roof with oak bargeboards. It stands outside the entrance doors.
Altar Cross (Wedding and Chapel Kit)
A 0.67 m plain altar cross on a stepped round base: a simple upright and crossbar with squared terminals and no denominational detail, for the generic country chapel. It stands at the middle of the altar mensa.
Garden Lawn Tile (Wedding and Chapel Kit)
A 2 m garden lawn tile with mown stripes and a scatter of blush petals, finishing 62 mm above its base. Tiles couple on a 2 m garden grid through lawn ports, so the ceremony lawn is a run of them.
Pew Kneeler Cushion (Wedding and Chapel Kit)
A 1.6 m ivory kneeler cushion with gold piping round its seam, on a low oak plinth. It lies on the nave floor at the foot of each pew for the congregation to kneel on.
Oak Church Pew (Wedding and Chapel Kit)
A 1.8 m oak church pew with the seat at 450 mm: shaped ends with fielded panels and finials, an ivory seat cushion, a raked backrest with a capping rail, an apron, a stretcher and a lipped book shelf on brackets behind. Pews face the altar in two columns down the nave.
Chapel Chancel Dais (Wedding and Chapel Kit)
A two step stone dais, 4.2 m wide and 0.36 m tall, with oak nosings on both step fronts and a slate riser band. It lifts the altar above the nave floor; the altar and its cross stand on the upper step in the scene.
Chapel Entrance Steps (Wedding and Chapel Kit)
Three stone entrance steps, 2 m wide rising 0.42 m with rounded nosings, set between two raking stone cheek walls. They sit outside the entrance doors.
Country Chapel Steeple (Wedding and Chapel Kit)
A 7 m country chapel steeple: a tapered stone shaft with a boarded door and slit lights, an open belfry of four piers under pointed heads with an oak bell frame, a slate spire and a plain gold cross. The bell is its own model; its axle sits on the frame bearers at 3.83 m.
Chapel Roof Truss Bay (Wedding and Chapel Kit)
A 2 m open timber roof bay for the 8 m nave: a tie beam at wall head height, a strapped king post, rafters to a ridge 1.5 m above, queen and raking struts, and oak purlins and ridge seated on the rafters. Bays repeat on roof ports, open so the interior reads from above.
AnimatedChapel Entrance Door Module (Wedding and Chapel Kit)
The chapel wall module with a 1.5 m by 2.4 m entrance pair in it: two boarded oak leaves with iron strap hinges and ring handles outside and ledges inside, in a moulded stone surround. The leaves hang on the outer stiles and swing on their pintles.
Chapel Wall Module (Wedding and Chapel Kit)
A 2 m by 3.4 m chapel wall in pale stone over a slate plinth, with a pointed lancet on a 1 m cill: oak frame and mullion, glazed head, hood moulds with label stops and a cornice. Modules butt on the 2 m module, so a nave wall of any length is a run of them.
Chapel Floor Tile with Border (Wedding and Chapel Kit)
The same stone tile with a slate border band along two edges, for the margin a nave floor keeps round the aisle or the edge of the chancel.
AnimatedChapel Bell (Wedding and Chapel Kit)
A 0.47 m bronze chapel bell: a hollow cast bell with a crown, iron straps up to an oak headstock, axle gudgeons each side and an iron clapper inside. The axle is 0.43 m above the lip; in the scene it rests on the steeple bell frame and the whole bell swings on it.
Chapel Stone Floor Tile (Wedding and Chapel Kit)
A 2 m square chapel floor tile, 60 mm deep: a stone bed with staggered, chamfered flags laid over it in pale coursed stone. Tiles couple on a 2 m grid, so a nave floor of any size is a run of them.
Chapel Chancel Arch Module (Wedding and Chapel Kit)
A 2 m chapel screen module: two stone piers on slate bases carrying a pointed arch over a 1.4 m opening, with a moulded arch ring on both faces, impost blocks at the springing and a cornice. It shares the wall ports, so a chancel screen of any width is a run of arches.
Reef cove (Ocean Giants: Whales, Dolphins, Sharks and Reef Life)
Giants swim a reef cove through the rock arch: fin and grey whales behind, dolphins and reef sharks in front over sand, kelp, coral and upwelling bubbles.
Polar edge (Ocean Giants: Whales, Dolphins, Sharks and Reef Life)
Pack ice at the polar edge: emperor, king, Adelie and gentoo penguins and hauled-out seals crowd the floes and a shingle beach, while belugas, narwhals and a grey whale work the open lead over kelp and a sea arch.