Free models · Game-ready GLB
Interior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
5,621 free GLB models
Drift cutaway review section (Underground Mine and Shaft Works)
A review variant of the straight drift with the east half of the rock shell removed so the arched section, ditch, bolting and services can be inspected from the side.
Drift dead end working face (Underground Mine and Shaft Works)
A 4 m drift module closed by a blasted rock face with a drilled round pattern, a broken muck pile at the toe and a face inspection light. One open drift port.
Widened drift chamber (Underground Mine and Shaft Works)
A 6 m by 8 m widened chamber module for parking, pumping or storage, with arched drift openings at both ends, a heavier steel roof frame and a raised concrete equipment plinth.
Ore pass raise collar (Underground Mine and Shaft Works)
A tipping point over an ore pass raise: a concrete collar around a 2 m square opening, heavy grizzly bars, a kickboard kerb, a side chute and a control stand.
Widened chamber cutaway review section (Underground Mine and Shaft Works)
A review variant of the widened chamber with the east wall removed so the excavated interior, roof frame and equipment plinth can be inspected and photographed from the side.
Left hand drift curve (Underground Mine and Shaft Works)
The mirrored quarter turn drift, running from the north face to the west face on the same 4 m radius grid.
Steel arch set drift section (Underground Mine and Shaft Works)
A 4 m drift section supported by four rolled steel arch ribs on foot plates with steel lagging channels spanning between the ribs and two tie rods.
Right hand drift curve (Underground Mine and Shaft Works)
A quarter turn drift on a 4 m radius grid, running from the north face to the east face with lights on the outer wall and a compressed air line following the curve.
Drift cross junction (Underground Mine and Shaft Works)
A 4 m flat backed four way intersection with arched drift openings on every side, four steel corner columns, a ring beam grid and roof bolts.
Timbered drift set section (Underground Mine and Shaft Works)
A 4 m drift section supported by four three-piece timber square sets with capping plates, angle braces and timber lagging packed against the back.
Straight mine drift 4 m (Underground Mine and Shaft Works)
A 4 m straight hard-rock drift module with a 3.2 m by 3.0 m arched clear section, thick rock shell, drainage ditch, resin rock bolts, a wall cable tray, compressed air and water lines and a bulkhead light.
Drift tee junction (Underground Mine and Shaft Works)
A 4 m flat backed intersection with three arched drift openings and a closed east wall, supported by four steel corner columns, a ring beam and roof bolts.
Shotcrete lined drift section (Underground Mine and Shaft Works)
A 4 m drift section finished with a sprayed shotcrete lining over welded mesh and resin bolts, with the ditch left open at the toe.
Chalkboard Price Sign (Food, Fresh Produce and Groceries)
Small A-frame price sign with a blank slate face: two mortised timber frames hinged on a turned dowel at the apex, each carrying a recessed board and a chalk ledge along its bottom rail.
Thirty Egg Tray (Food, Fresh Produce and Groceries)
Empty moulded pulp egg tray: a thirty cup grid of five by six drawn as a single sheet, so every cup is a real hollow with a cone standing between each four, ringed by a raised wall and a flat flange.
String Shopping Bag (Food, Fresh Produce and Groceries)
Empty string shopping bag dropped on the floor: two opposed families of helical cords crossing into a diamond mesh over a collapsed envelope, held open by a corded hem with both handle loops laid over and flopped forward.
Plastic Produce Bag (Food, Fresh Produce and Groceries)
Thin clear produce bag part filled and knotted: a swollen creased lower body gathered into a narrow neck, a knot bulb above it and two loose ears left standing.
Paper Mushroom Bag (Food, Fresh Produce and Groceries)
Small kraft mushroom bag lying on its side: a flat squared base end running out into a flattened body, closed by a rolled crease at the far end with the folded flap laid back up over the slope.
Wooden Market Bowl (Food, Fresh Produce and Groceries)
Wide shallow turned bowl for loose produce: one revolved cross-section from the foot ring out over the rim and back down the inside, with a turned bead below the lip.
Tiered Produce Riser (Food, Fresh Produce and Groceries)
Three-step timber riser for banking a display up: two stepped side cheeks carrying three slatted treads, each closed at the front by a riser board and tied under the nose by a rail.
Paper Grocery Bag (Food, Fresh Produce and Groceries)
Standing kraft grocery carrier: a gusseted body creased down each end face, a squared base, a folded rim and two twisted rope handles set through the front and back panels.
Wicker Display Basket (Food, Fresh Produce and Groceries)
Round woven display basket: twenty four upright stakes with seven weavers threaded over and under them, closed with a rolled rim and a solid woven base pad.
Cardboard Produce Tray (Food, Fresh Produce and Groceries)
Low kraft board tray: four walls stitched to a flat base, a folded hem round the top edge, a diagonal folded flap at each corner and a punched hand hole through each end.
Plastic Produce Crate (Food, Fresh Produce and Groceries)
Moulded plastic produce crate: the side walls are a frame of vertical bars with open piercings between them, an integral hand opening in each end and a stacking rim round the mouth.