Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,184 free GLB models
Canteen stacking chair (Office Lobby and Building Facilities)
A 0.46 m canteen stacking chair at 450 mm: a moulded seat shell on a four-leg tube frame with an H stretcher and glides, and a waisted back shell on two swept stems.
Canteen bench (Office Lobby and Building Facilities)
A 1.6 m canteen bench at 450 mm: a crowned upholstered pad with a welt seam on a welded tube frame with a stiffening rail and glides.
Canteen table, six seat (Office Lobby and Building Facilities)
A 1.8 m by 0.8 m six-seat canteen table at 740 mm: a postformed laminate top on a welded tube frame with a lower stretcher, a beam under the top and levelling glides.
AnimatedDrinks vending machine (Office Lobby and Building Facilities)
A 0.9 m by 1.85 m drinks vending machine: an illuminated blank front panel with a glazed product window, a five-button selection column, a coin and card module and a delivery flap as a named pivoted node. No branding or product graphics.
AnimatedSnack vending machine (Office Lobby and Building Facilities)
A 0.9 m by 1.85 m snack vending machine: a glazed front over five product shelves with helix coils, a selection column with accent buttons, a coin and card module and a delivery flap as a named pivoted node. No branding or product graphics.
Bottled water dispenser (Office Lobby and Building Facilities)
A 1.05 m bottled water dispenser: a chamfered tower on a dark plinth with two paddle taps and spouts, a perforated drip tray, a bottle collar and an inverted 19 litre bottle.
Tea point island (Office Lobby and Building Facilities)
A 1.4 m by 0.9 m tea point island: a double-sided carcass on a recessed plinth, a bullnose worktop with an inset sink and mixer, two bin apertures with rimmed flaps, a rear open shelf and an accent rail on the standing side.
AnimatedKitchenette wall cupboard, 600 mm (Office Lobby and Building Facilities)
A 600 mm kitchenette wall cupboard 720 mm high and 340 mm deep: a chamfered carcass with an internal shelf, two doors on rail handles as named pivoted nodes and two fixing brackets.
AnimatedStaff kitchenette run (Office Lobby and Building Facilities)
A 1.8 m staff kitchenette run: an 18 mm carcass on a recessed plinth with an inset stainless sink and pillar mixer, a postformed worktop and splashback, two doors, a three-drawer bank, an appliance void and a wall cupboard row with an accent light channel.
Plant room air handling unit (Office Lobby and Building Facilities)
A 2.4 m by 1.5 m plant room air handling unit 1.0 m deep: a sectional casing on an anti-vibration base with three access doors, latches and hinges, a filter sight glass, a fan inspection window, a control panel, two flanged duct spigots and a condensate drain.
Raised access floor tile, lifted (Office Lobby and Building Facilities)
The same raised floor bay with the tile lifted through twenty-four degrees on its edge as a named pivoted node, and a twin-cup suction lifter resting on it.
Cable ladder bend (Office Lobby and Building Facilities)
A 1.2 m cable ladder right-angle bend: swept outer and inner rails top and bottom on vertical posts, fanned rungs through the turn and splice plates on both openings.
Raised access floor tile (Office Lobby and Building Facilities)
A 600 mm raised access floor tile on four adjustable pedestals at 150 mm: threaded pedestal heads, stringer rails and a chamfered tile with a wear layer.
Cable ladder run, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m cable ladder run 450 mm wide: two chamfered side rails on 100 mm sections with five rungs, splice plates at both ends and two drop rod brackets.
UPS cabinet (Office Lobby and Building Facilities)
A 0.6 m by 1.85 m UPS cabinet 0.85 m deep: a chamfered case on a plinth with a control display and four indicator lamps, four battery drawer fronts with pull rails and a rear extract grille.
In-row cooling unit (Office Lobby and Building Facilities)
A 300 mm in-row cooling unit on the 2.0 m rack line: a rack-format frame with a full-height louvred front, three fan assemblies, a control display and chilled water pipework rising at the rear.
Floor power distribution unit (Office Lobby and Building Facilities)
A 0.34 m by 1.8 m floor power distribution unit: a chamfered column on a plinth with a metering display, five outlet banks of six sockets, a louvred vent and a top cable gland.
Patch panel, 24 port (Office Lobby and Building Facilities)
A 0.485 m 24-port patch panel with rack ears: two rows of twelve chamfered outlets with accent port markers and a front cable management bar with five formed cable hoops.
AnimatedWall-mount comms cabinet (Office Lobby and Building Facilities)
A 0.62 m by 0.66 m wall-mount comms cabinet 0.42 m deep: a welded case with two mounting rails, a patch bank and two switches, a roof extract grille and a glazed hinged door as a named pivoted node.
Animated42U server rack with mesh doors (Office Lobby and Building Facilities)
The same 42U rack fitted with perforated mesh doors front and rear, each a named node pivoted on its hinge edge with a swing handle.
Rack shelf and console unit (Office Lobby and Building Facilities)
A 0.55 m 19-inch cantilever shelf stack 0.76 m tall: three vented shelves on two punched stiles carrying two appliances, with a fold-out console screen and key deck on top.
42U server rack, open frame (Office Lobby and Building Facilities)
A 600 mm by 1000 mm 42U server rack 2.0 m tall as an open frame: chamfered side stiles and a base plinth, four punched mounting rails, seven populated appliances with vent slots and status lamps, cable fingers, a management arm, a vertical power strip and levelling feet.
Twin toilet roll dispenser (Office Lobby and Building Facilities)
A 0.34 m twin toilet roll dispenser: a chamfered stainless hood on a back plate over two loaded rolls on spindles, with a core cover, a tear bar and a blank accent label.
AnimatedBaby change unit (Office Lobby and Building Facilities)
A 0.86 m by 0.5 m wall-mounted baby change unit shown deployed: a chamfered wall cabinet with an accent instruction panel and a dished changing tray on two struts and a safety strap, as a named node pivoted on its lower hinge line.