Free models · Game-ready GLB
Modern
Every realistic modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
9,627 free GLB models
AnimatedStudio Rack Cabinet (Music Recording Studio and Instruments)
A 1.15 m timber sided rack cabinet on rubber feet, loaded with 19 inch outboard: a compressor, a channel strip, a converter, a power conditioner and a patch strip, with meter windows, knob rows and rack screws, plus a shallow accessory drawer on slides.
Studio Desk with Screen Pair (Music Recording Studio and Instruments)
A 1.6 m studio desk in dark timber with a steel underframe, a lower shelf and a modesty panel, carrying a pair of 24 inch screens on their feet, a keyboard and a mouse. The screens are turned in toward the engineer.
Mixing Console (Music Recording Studio and Instruments)
A 1.98 m analogue mixing console on timber side cheeks: sixteen channel strips of four knobs, a switch and a 100 mm fader on a raked bay, a master section, a meter bridge with two meter windows, and an armrest along the engineer side. It stands 1.02 m to the top of the bridge.
Studio Monitor on a Stand (Music Recording Studio and Instruments)
A two way nearfield studio monitor on a 940 mm pole stand: a 240 by 370 mm cabinet with a six inch woofer, a waveguide tweeter, a rear facing port tube and a status lamp, tipped back on a cast plate base.
Vocal Microphone with Pop Shield (Music Recording Studio and Instruments)
A vocal microphone at 1.54 m on a straight stand: a large diaphragm capsule in an elastic shockmount, with a 150 mm pop shield on a gooseneck clamped to the column, over a telescopic column and a rubber footed tripod.
Bass Amplifier Stack (Music Recording Studio and Instruments)
A bass rig 1.24 m tall: an eight by ten inch speaker cabinet with a grille cloth, metal corner caps and rubber feet, under a rackmount amplifier head with seven knobs, a meter window and a status lamp.
Boom Stand, Empty (Music Recording Studio and Instruments)
The same counterweighted boom stand with an empty clip, for a source that already has its own microphone or for dressing a corner of the live room.
Microphone on a Boom Stand (Music Recording Studio and Instruments)
A counterweighted boom stand at 1.42 m with a large diaphragm microphone in its clip, angled down over a source 620 mm out from the column. The base is a rubber footed tripod and the column is telescopic.
Guitar Pedal Board (Music Recording Studio and Instruments)
A sloped 620 by 320 mm pedal board carrying five effects pedals in coloured enclosures, each with two knobs, a footswitch and a status lamp, patched together with short jumper leads.
Synth Keyboard on an X Stand (Music Recording Studio and Instruments)
A 61 note synthesiser on an X frame stand at 720 mm: a sloped control panel with six knobs, a display and a pitch strip over a keybed of weighted naturals and sharps, on a crossed tube frame with rubber feet.
Guitar Amplifier Combo (Music Recording Studio and Instruments)
A 1x12 valve combo guitar amplifier, 620 by 555 by 260 mm: a covered cabinet with a cream grille cloth over a twelve inch driver, metal corner caps, a strap handle, rubber feet and a top mounted control panel with six knobs, a pilot lamp and an input jack.
Upright Piano (Music Recording Studio and Instruments)
A 1.46 m upright piano in dark timber: a lidded carcass with a fall board, a hinged music desk, a keybed of naturals and sharps, a toe block with three brass pedals and four castors. It stands 1.31 m to the top.
AnimatedHi-Hat Stand with Cymbals (Music Recording Studio and Instruments)
A hi-hat stand with a pair of 14 inch brass cymbals: the bottom cymbal fixed on its seat and the top one on a clutch 70 mm above it, over a pull rod, a footboard and a rubber footed tripod.
Bass Drum with Two Rack Toms (Music Recording Studio and Instruments)
A 22 inch bass drum in a gloss red finish on its spurs, with a badge ring on the front head, eight tube lugs and counter hoops, carrying a 12 and a 13 inch rack tom on a mount post and arms tipped toward the player. Together they are the front of a five piece kit.
AnimatedCrash Cymbal on a Stand (Music Recording Studio and Instruments)
An 18 inch crash cymbal on a straight stand at 1.38 m: a hammered brass disc with a raised bell sitting on a felt and wing nut over a tilter, on a telescopic column and a rubber footed tripod.
Snare Drum on a Stand (Music Recording Studio and Instruments)
A 14 by 5.5 inch brushed steel snare drum held in a three-armed basket stand at 620 mm, with eight tube lugs, counter hoops, a strainer and a throw-off lever. The stand is a tripod on rubber feet with a telescopic column.
Floor Tom (Music Recording Studio and Instruments)
A 16 by 14 inch floor tom in a gloss red finish on three rubber tipped legs, with eight tube lugs, counter hoops and leg brackets. It stands 600 mm to the batter head, which is where a five piece kit puts it.
Electric Guitar on a Stand, Natural Finish (Music Recording Studio and Instruments)
The same solid body electric guitar and A-frame stand in a natural timber finish, for a second guitar in a rack without a repeated colour.
Acoustic Guitar on a Stand (Music Recording Studio and Instruments)
A dreadnought acoustic guitar on a folding A-frame stand: a 500 mm waisted timber body 115 mm deep with a rosetted sound hole, a pin bridge with a bone saddle, a 19 fret neck, a headstock with six machine heads and six strings from bridge to nut.
Electric Guitar on a Stand (Music Recording Studio and Instruments)
A solid body electric guitar in a gloss red finish on a folding A-frame stand: a waisted double cutaway body 460 mm long, two humbuckers, a scratchplate, a bridge, three controls and a jack, a 21 fret neck, a machine head headstock and six strings from bridge to nut.
Bass Guitar on a Stand (Music Recording Studio and Instruments)
A four string electric bass on a folding A-frame stand: a 500 mm offset body in a satin graphite finish, two pickups, a bridge and controls, a long 20 fret neck and a two-a-side headstock with heavy machine heads. Four strings run from the bridge to the nut.
Rink End and Locker Room (Ice Hockey Arena and Locker Room)
A working rink end laid from ice pans with the blue line, centre line, face-off dots and a painted crease reading across them, closed by a run of dasher boards with corners, a gate and protective glass over them: a goal pegged on the line with pucks and two cone lanes set out...
AnimatedSkate Sharpening Machine (Ice Hockey Arena and Locker Room)
A 860 mm skate sharpening machine: a dark cabinet with a blue front, a steel deck carrying the holder carriage, a guarded grinding wheel with a red dressing arm, a readout and a start button. The wheel is a named node and spins; the carriage is fixed.
AnimatedLaundry Bin (Ice Hockey Arena and Locker Room)
A 780 mm wheeled laundry bin: a blue tub on a dark chassis with four castors, a white label panel and a hinged white lid. The lid is a named node on its back edge and opens and closes; the castors are fixed.