Free models · CC0
Roads infrastructure
Every realistic roads infrastructure below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
250 free GLB models
Aisle floor marking corner tile (Hardware Store and DIY Warehouse)
A 2.0 m square floor marking corner: the aisle edge line turns through 90 degrees with a radiused corner, plus a bay corner square and a stop bar.
Aisle floor marking tile (Hardware Store and DIY Warehouse)
A 2.0 m square painted floor marking tile: a sealed concrete slab with two 100 mm aisle edge lines and a hatched pedestrian margin, 6 mm proud of the slab face.
Escalator comb landing plate (Retail Store Fixtures and Mall)
An escalator landing plate: a stainless comb plate with a fingered leading edge, a chequered floor plate and a recessed access panel with two lift points.
Escalator landing balustrade (Retail Store Fixtures and Mall)
A 2.4 m level balustrade section for the landing approach to an escalator: the same base shoe, glass and handrail profile run flat rather than raked.
Escalator newel end (Retail Store Fixtures and Mall)
An escalator newel end for one side of a run: the handrail returning through 180 degrees around a moulded newel head, over a glass panel in the landing base shoe.
Concourse escalator (Retail Store Fixtures and Mall)
A single escalator rising 3.6 m at 30 degrees: a clad truss, comb-plate landings at both ends, sixteen cleated steps with riser faces, skirt panels, and glass balustrades with a moving-handrail profile and turned newel heads.
Escalator balustrade section (Retail Store Fixtures and Mall)
A 2.4 m raked balustrade section for extending an escalator run: a glass panel in a chamfered base shoe with the moving-handrail profile above, modelled as one side.
Drive-thru lane bollard, graphite (Fast Food Counter and Drive-Thru)
The lane bollard in a graphite powder-coated finish; geometry is unchanged.
Lane marker post (Fast Food Counter and Drive-Thru)
A flexible lane delineator post on a chamfered base with a rounded cap and reflective bands on both faces.
Height restriction bar (Fast Food Counter and Drive-Thru)
A 3.4 m drive-thru height restriction gantry: two posts on cast bases, a swinging tube bar with seven banded sleeves and a blank clearance plate hung on two links.
Car park bay marking tile (Fast Food Counter and Drive-Thru)
A 2.4 m by 5 m car park bay marking tile: a thin asphalt slab with a painted division line, a head line and a plain diagonal hatch band down the centre.
Drive-thru lane kerb, bull-nosed end (Fast Food Counter and Drive-Thru)
A 600 mm lane kerb end unit with a bull-nosed tail, closing a kerbed island without a raw square end.
Drive-thru lane bollard (Fast Food Counter and Drive-Thru)
A 1 m stainless lane bollard with a base flange on four bolts, a domed cap and two reflective bands.
Drive-thru lane kerb, 90 degree curve (Fast Food Counter and Drive-Thru)
A 1.2 m radius 90 degree drive-thru lane kerb built from ten faceted radius units, with the painted top line following the curve.
Drive-thru lane kerb, straight (Fast Food Counter and Drive-Thru)
A 1.2 m straight drive-thru lane kerb, 250 mm wide and 120 mm high, chamfered on the top edge with a painted top line, a reflective stud and a moulded joint at the coupling face.
Floor gully with grating (Restaurant Kitchen and Dining Room)
A 900 mm stainless floor gully: a pressed channel with a rim frame, a removable slotted grating and a silt basket at the outlet.
Light Rail Track (Trench Line 1917)
Narrow-gauge trench tramway panel on sleepers.
Start light gantry (Grand Prix Circuit and Open-Wheel Cars)
Start light gantry in an original generic circuit family.
Marked pit box tile (Grand Prix Circuit and Open-Wheel Cars)
Marked pit box tile in an original generic circuit family.
Astroturf circuit edge strip (Grand Prix Circuit and Open-Wheel Cars)
Astroturf circuit edge strip in an original generic circuit family.
Grass verge tile (Grand Prix Circuit and Open-Wheel Cars)
Grass verge tile in an original generic circuit family.
Tarmac runoff tile (Grand Prix Circuit and Open-Wheel Cars)
Tarmac runoff tile in an original generic circuit family.
Gravel trap tile (Grand Prix Circuit and Open-Wheel Cars)
Gravel trap tile in an original generic circuit family.
High exit kerb (Grand Prix Circuit and Open-Wheel Cars)
High exit kerb in an original generic circuit family.