Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
8,088 free GLB models
Adjustable Bench, Flat (Gym and Fitness Studio)
An adjustable weight bench with the back section laid flat: a two-piece vinyl pad on a tubular frame with a notched ladder bracket under the back, rubber feet and a 460 mm seat height.
Power Rack (Gym and Fitness Studio)
A 2.3 m four-post power rack with numbered hole patterns, a knurled pull-up bar across the front, two J-hooks, full-length safety arms and a loaded Olympic bar racked at working height. Static geometry: the J-hooks and safeties are modelled where a lifter would set them.
Forty-Five Degree Leg Press (Gym and Fitness Studio)
A plate-loaded 45 degree leg press: a raked twin-rail carriage with a ribbed footplate, a reclined back pad and seat, shoulder rests and two loading horns carrying 20 kg bumper plates.
Flat Utility Bench (Gym and Fitness Studio)
A 1.24 m flat utility bench: a crowned vinyl pad on a welded tubular tripod frame with rubber feet, at the 450 mm seat height a dumbbell or barbell press is worked from.
AnimatedLat Pulldown Station (Gym and Fitness Studio)
A 2.2 m lat pulldown with a twelve-plate selectorised stack on guide rods, a cantilevered top pulley, an angled lat bar, a padded seat and adjustable thigh pads. The stack lifts and returns on its rods; the cable is fixed geometry, because a cable that bends is not a rigid node.
AnimatedStudio Spin Bike (Gym and Fitness Studio)
A studio spin bike with an exposed weighted flywheel, a heavy tubular frame, a saddle and bar on quick-release posts, a resistance lever and a compact console. The flywheel spins and the console tips; the belt drive is fixed geometry.
AnimatedUpright Exercise Bike (Gym and Fitness Studio)
An upright exercise bike on stabiliser feet: a shrouded flywheel, a padded saddle on an adjustable post, swept handlebars with rubber grips, a crank set with pedals and a tilting console. The flywheel spins and the console tips; the drive belt inside the shroud is fixed geometry.
AnimatedAir Rowing Machine (Gym and Fitness Studio)
A 2.4 m air rower: a caged flywheel on a front tower, an aluminium monorail, a padded seat on rollers and pivoting footplates. The seat slides and the flywheel spins; the chain and handle strap are fixed geometry.
AnimatedCommercial Treadmill (Gym and Fitness Studio)
A 2.05 m commercial treadmill: a cushioned running deck between side rails, a motor cowl, tubular uprights with rubber-gripped handrails and a tilting console head on its mount. The belt itself is fixed geometry, because a running belt is a loop no rigid node transform can drive.
Weight Plate Tree, Loaded (Gym and Fitness Studio)
A 1.4 m vertical plate tree on a three-legged base with six horns, loaded with four 20 kg bumper plates and eight smaller plates, the horns staggered up the column so plates clear each other.
Cast Kettlebell (Gym and Fitness Studio)
A 24 kg cast kettlebell, 235 mm tall, with a squared cast handle loop and a flat rubber base ring so it stands square on a rubber floor.
Bumper Plate Stack (Gym and Fitness Studio)
Six bumper plates stacked flat on the floor, three 20 kg, two 10 kg and one 5 kg, each turned a little against the one below so the stack reads as loose rather than machined.
Kettlebell Rack, Six Bells (Gym and Fitness Studio)
A 1.1 m two-tier kettlebell rack carrying six cast bells from 12 to 32 kg on rubber-lined shelves, on a raked tubular frame with levelling feet.
Olympic Barbell with Bumper Plates (Gym and Fitness Studio)
A 2.2 m Olympic barbell loaded with two 20 kg bumper plates and a 10 kg plate a side behind spring collars, resting on its plates. The bar is a single rigid model: the sleeves do not spin.
Olympic Barbell, Bare (Gym and Fitness Studio)
The same 2.2 m Olympic barbell with the plates and collars stripped off, for racking on a power rack or loading in engine.
Three-Tier Dumbbell Rack, Loaded (Gym and Fitness Studio)
A 1.9 m three-tier A-frame dumbbell rack loaded with twelve rubber hex dumbbells on saddled trays, with rubber cradle strips, splayed end frames on levelling feet and weight labels along the front rail.
Rubber Hex Dumbbell, Light (Gym and Fitness Studio)
A light rubber hex dumbbell, 360 mm long, built to the same pattern as the 20 kg unit with smaller heads and a shorter handle.
Rubber Hex Dumbbell (Gym and Fitness Studio)
A 20 kg rubber hex dumbbell, 420 mm long, with a knurled steel handle, chromed collars and six-sided heads that stop it rolling on the floor.
Rubber Hex Dumbbell, Heavy (Gym and Fitness Studio)
A heavy rubber hex dumbbell, 480 mm long, built to the same pattern as the 20 kg unit with deeper heads for the top of a rack.
Phone Filming Tripod (Skate Park and Street Sports)
A 1.2 m three leg tripod with a phone cradle on a short head, set up to film a trick. Deliberately not rigged: the legs and the head are one solid, because a telescoping leg needs a joint per section.
Portable Boombox (Skate Park and Street Sports)
A two speaker portable stereo with a carry handle, a cassette door pressed into the fascia, four buttons and a raised aerial. Nothing opens.
Spectator Bleacher (Skate Park and Street Sports)
A 4 m three row spectator stand with maple bench tops, steel foot decks, a raked frame and a rear safety rail. Static.
Skate Park Warning Sign (Skate Park and Street Sports)
A 1.75 m post sign: a yellow board with a bordered panel and three blank text bars, the notice board a park entrance carries. The text is geometry, not lettering.
Drinking Fountain (Skate Park and Street Sports)
A concrete pedestal fountain with a stainless top, a shallow bowl, a bubbler spout and a push panel on the front. No water.