Free models · Game-ready GLB
Props
Every realistic prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
7,346 free GLB models
AnimatedMoving Head Light (Nightclub and DJ Booth)
A moving head spot: a base with a display panel and hook clamp rails, a yoke that pans on it and a head that tilts in the yoke behind a cyan tinted lens. About 750 mm tall at level.
UV Blacklight Bar (Nightclub and DJ Booth)
A 1.1 m ultraviolet wash bar: a single long tube in a dark reflector housing with end caps, on a yoke and hook clamp. Modelled in the deep magenta a UV tube actually reads as.
Strobe Bar (Nightclub and DJ Booth)
A 1.1 m four cell strobe bar: four lamp windows behind pale diffusers in a dark extrusion, with a yoke and hook clamp on top for clamping to a truss chord.
Hanging Speaker on a Fly Frame (Nightclub and DJ Booth)
The mid cabinet in a fly frame: the box slung between two steel straps under a bumper bar with shackles at both pick points, for flying delay boxes off the truss over the floor.
Speaker Stack Mid Cabinet (Nightclub and DJ Booth)
A two way top box for the head of a stack: a 700 mm trapezoidal enclosure with a horn flare over the compression driver behind the grille, pale banding on the baffle and handles on both cheeks.
Speaker Stack Sub Cabinet (Nightclub and DJ Booth)
A double 18 inch club subwoofer: a 1.15 m birch enclosure on skid runners with two tuned ports through the baffle, a grille over the mouth, a pale band along the bottom of the baffle and a recessed connector plate on the back.
Record Crate (Nightclub and DJ Booth)
A 360 mm wooden record crate packed with fourteen 12 inch sleeves in pale, magenta, cyan, amber and grey, leaning back the way a browsed crate does, with cut handholes in both ends.
DJ Headphones on the Desk (Nightclub and DJ Booth)
A pair of closed back DJ headphones lying on the desk: a padded metal headband with the pale top pad, swivel forks and two earcups with magenta ear pads facing in.
DJ Booth Monitor Wedge (Nightclub and DJ Booth)
A booth monitor: a 400 mm wedge on rubber runners with a perforated grille over the coaxial driver and a pale band along the baffle, aimed up at the DJ from the end of the desk.
Laptop on a DJ Stand (Nightclub and DJ Booth)
A laptop open on a folding X frame stand: a pale bodied machine with its keyboard deck and a lit screen, raised 250 mm above the desk so it clears the mixer.
CDJ Media Player (Nightclub and DJ Booth)
A club media player: a 320 mm deck with a dished metal jog wheel under a pale rim, a raked waveform screen, cue and loop buttons in cyan and the tempo fader down the right hand side.
DJ Mixer (Nightclub and DJ Booth)
A four channel club mixer: a raked control surface with the channel faders and a crossfader in pale caps, a bank of gain and EQ knobs, the printed channel strip and rack ears on both cheeks.
DJ Booth Desk (Nightclub and DJ Booth)
A 1.9 m DJ desk: a pale laminate top at 1 m on dark steel cheeks, a brushed nosing along the working edge, a dropped shelf below for the laptop and a record crate, and a cable trough with its lid along the back.
AnimatedTurntable Deck (Nightclub and DJ Booth)
A direct drive turntable: a 450 mm plinth with a cast aluminium platter on a magenta slipmat, the spindle, a counterweighted S arm with its headshell and cartridge, and the pitch fader plate beside it.
Crate of oil bottles (Car Repair Garage and MOT Workshop)
Blue stacking crate holding six five litre oil bottles: moulded handles and a slotted base on the crate, each bottle with a shoulder, a charcoal cap and a blank cream label.
Job calendar board (Car Repair Garage and MOT Workshop)
Wall planner board: a cream writing surface in a charcoal frame with a month grid ruled across it, five red and blue magnets, a pen tray and a marker lying in it.
Twenty litre jerrycan (Car Repair Garage and MOT Workshop)
Pressed steel jerrycan in green: the X ribbed sides, three carry handles across the top, a cam lock cap and a pouring spout clipped to the side, 0.47 m tall.
Workshop wall clock (Car Repair Garage and MOT Workshop)
Plain round wall clock: a charcoal case with a cream dial, twelve tick marks, three hands and a domed glass, 0.34 m across.
Twin tube ceiling light bar (Car Repair Garage and MOT Workshop)
Suspended fluorescent fitting 1.5 m long: a grey channel body on two drop rods, two glowing tubes in charcoal end caps and a slotted reflector between them.
Spill granule tub with scoop (Car Repair Garage and MOT Workshop)
Yellow absorbent granule tub: a tapered drum with a moulded rim, a charcoal lid tipped against the side, a scoop standing in the granules and a blank cream label band.
First aid box on the wall (Car Repair Garage and MOT Workshop)
Green first aid case on a wall bracket: a moulded body with a carry handle, a white cross panel on the lid, two catch clips and an eye wash bottle in the holder beside it.
Fire extinguisher on a floor stand (Car Repair Garage and MOT Workshop)
Nine litre extinguisher in red on a charcoal floor stand: a domed body with a cream label band, a brass valve head with a squeeze lever and a pressure gauge, and a hose with its horn clipped to the side.
Sweeping brush and dustpan (Car Repair Garage and MOT Workshop)
Stiff bristle yard brush leaning as it is left in a corner: a timber stock with a charcoal bristle block and a long handle, with a steel dustpan standing beside it.
AnimatedWorkshop bin with a flip lid (Car Repair Garage and MOT Workshop)
Wheeled workshop bin: a grey body with moulded ribs on two wheels, a charcoal flip lid on its hinge bar with a lifting lip, and a blank cream duty label on the front, 0.9 m tall.