Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
12,782 free GLB models
Tree and shrub display frame (Garden Centre and Florist)
A heavy duty frame for standing potted trees against: a galvanised A frame on ground rails with three tying rails, a kick board and a gravel tray floor for irrigation run off.
Hanging basket rail (Garden Centre and Florist)
A free standing basket rail: two braced posts carrying a 2 m tube at 2.05 m, with three empty wire lined baskets on chain hangers and a drip tray shelf underneath.
Mesh display bay (Garden Centre and Florist)
A free standing mesh display bay: a welded grid panel in a tube frame on splayed feet, six hanging arms, a wire shelf and a blank header card holder.
Circular pot display ring (Garden Centre and Florist)
A round three tier display table: a cast base, a central column and three chamfered ring decks of decreasing diameter, with a label rail clip on the widest deck.
Timber display crate stack (Garden Centre and Florist)
Three slatted timber display crates stacked and stepped back, each with corner blocks, a chamfered top rail and a slotted base, the way seasonal stock is merchandised on the floor.
Danish trolley, four shelves (Garden Centre and Florist)
The Danish trolley loaded with four mesh shelves at the standard 0.36 m spacing, each dropped onto the coloured shelf lugs on the uprights, ready for trays of stock.
Tiered plant display stand (Garden Centre and Florist)
A three tier A frame display stand in painted steel: stepped shelves rising toward the back, a slatted lower deck, a label rail on every step and rubber footed legs.
Raised timber sales bed (Garden Centre and Florist)
A 1.6 m raised sales bed: sleeper sides on corner posts, a slatted false floor at 0.45 m, a capping rail wide enough to sit a pot on and drainage slots in the base.
Bench run end panel (Garden Centre and Florist)
The panel that closes the end of a benching run: a timber frame with a boarded infill, a return leg and a blank header board for aisle signage.
Danish trolley, empty (Garden Centre and Florist)
An empty Danish plant trolley: a 1.35 m steel base deck on four swivel castors, two end uprights with welded mesh panels, a top tie bar and the shelf lugs the trays hook into.
Rolling glasshouse bench 1800 (Garden Centre and Florist)
A 1.8 m rolling bench: a galvanised tray top with turned up side rails riding on roller tubes, a braced leg frame with adjustable feet, and the anti tip stops at each end of the roll.
Fixed timber staging bench 1800 (Garden Centre and Florist)
A 1.8 m fixed staging bench: a slatted softwood top on a braced timber frame, a lower slatted shelf for pot stock and an angled price rail along the customer edge.
Craft support cradle (UFO Crash Site and Recovery Facility)
A 9 m steel cradle holding a disc craft clear of the floor: four A-frame legs on concrete pads tied by a base ring and diagonal braces, four raked saddles with padded top plates and side stops, a hazard band and a four-tread access stair with rails.
Sample rack wall (UFO Crash Site and Recovery Facility)
A 2.4 by 2.3 m sample rack: six shelf levels carrying twenty four trays of capped vials, blank shelf labels and a closed top plate.
Analysis bench (UFO Crash Site and Recovery Facility)
A 2.8 m laboratory bench: a cupboard base with three drawer lines, a fume hood with a glass sash and extract duct over the left half, a reagent shelf, an instrument case, a microscope, four capped sample vials and two stools.
Cryogenic pod (UFO Crash Site and Recovery Facility)
A 2.6 m cryogenic pod on a steel cradle at 9 degrees head-up: a rounded outer shell, a frosted lid on a hinged node, a foot-end compressor with coiled lines and two lit control panels.
Control console bank (UFO Crash Site and Recovery Facility)
A five-position curved console bank on a 3.6 m radius: raked instrument panels with lit faces, upright screens, keyboard shelves, a cable tray under the desks and two five-star operator chairs.
Examination table (UFO Crash Site and Recovery Facility)
A 2.3 m stainless examination table on a pedestal column and ram: a dished top with side rails, a centre drain channel running to a floor sump, an articulated two-link overhead lamp on its own floor post and a three-shelf instrument trolley on castors.
Specimen tank with suspended mass (UFO Crash Site and Recovery Facility)
The same tank with an abstract dark mass suspended in the column. The mass is a smooth non-representational form, not an organism.
Specimen tank, empty (UFO Crash Site and Recovery Facility)
A 3 m containment tank standing empty: a machined plinth, a double glass cylinder over a lit fluid column, a bolted cap, three service pipes with valve blocks and a status panel.
Cargo net and slings (UFO Crash Site and Recovery Facility)
Lifting tackle laid out on the ground: a folded cargo net of nine by seven cords over a low pile, four coiled strops with thimbles and shackles, a master link and two spreader bars.
Transport crate (UFO Crash Site and Recovery Facility)
A 6.2 m ribbed steel transport crate for a recovered hull section: corrugated sides, eight corner castings with lifting eyes, latching bars, a hazard chevron band and a blank data plate.
Sensor tripod (UFO Crash Site and Recovery Facility)
A 2 m survey tripod with footed legs, a spreader brace, an instrument head with a lens and a status lamp, a whip antenna and a battery case on the ground.
Survey marker set (UFO Crash Site and Recovery Facility)
Six folded evidence markers with blank number plates, six flagged survey stakes, a banded ranging pole and a tape reel, arranged as a working set over a 4 m area.