Free models · CC0
Props
Every prop below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
5,621 free GLB models
Wide snowboard, 1.60 m (Snowboard Gear and Freestyle Riders)
A 1.60 m wide board with a 272 mm waist and blunt tips, cut so a large boot clears the edges.
Directional all-mountain snowboard, 1.58 m (Snowboard Gear and Freestyle Riders)
A 1.58 m directional all-mountain board with a longer nose, a tapered tail, a 20 mm setback stance and camber.
True twin freestyle snowboard, 1.52 m (Snowboard Gear and Freestyle Riders)
A 1.52 m true twin freestyle board: identical nose and tail, centred stance, positive camber and mounting discs fitted.
Drying rack (Backcountry Snowboarding and Avalanche Safety)
Timber drying rack outside the hut with a shell jacket, bib trousers, gloves and a pair of boots hung to freeze dry.
Group bivvy shelter (Backcountry Snowboarding and Avalanche Safety)
Pitched group shelter bag with a vent window and weighted hem, with its stuff sack alongside.
Roll-up rescue stretcher (Backcountry Snowboarding and Avalanche Safety)
Roll-up plastic drag stretcher half unrolled on the snow, with grommets, cross straps and a four point drag bridle.
Slope inclinometer (Backcountry Snowboarding and Avalanche Safety)
Pendulum slope meter propped on a small stand, with a quadrant scale, a needle and a sight edge.
Handheld two-way radio (Backcountry Snowboarding and Avalanche Safety)
Handheld radio standing on its base with a screen, keypad, flexible antenna and a speaker microphone alongside.
Field first aid kit (Backcountry Snowboarding and Avalanche Safety)
Soft field first aid case lying open, with packed dressings, a roll bandage and a marker panel on the lid.
Deployed airbag backpack (Backcountry Snowboarding and Avalanche Safety)
The same airbag pack after deployment, with the balloon inflated above the shoulders and the fill hose visible.
Avalanche airbag backpack (Backcountry Snowboarding and Avalanche Safety)
Thirty litre airbag pack standing on its base with the trigger handle on the shoulder strap and shovel and probe stowed on the front.
Avalanche transceiver (Backcountry Snowboarding and Avalanche Safety)
Digital avalanche transceiver with a screen, three range lamps and a mode slider, laid out with its body harness.
Splitboard separated in skins mode (Backcountry Snowboarding and Avalanche Safety)
The same board taken apart into two skinned halves with the bindings turned fore and aft on their touring pucks.
Powder board with bindings (Backcountry Snowboarding and Avalanche Safety)
Directional 1.62 m powder board with a swallowtail, set back stance and two strap bindings fitted.
Splitboard in ride mode (Backcountry Snowboarding and Avalanche Safety)
Splitboard joined into one 1.58 m board with the centre seam, tip and tail clips and touring pucks visible.
Craft support cradle (UFO Crash Site and Recovery Facility)
A 9 m steel cradle holding a disc craft clear of the floor: four A-frame legs on concrete pads tied by a base ring and diagonal braces, four raked saddles with padded top plates and side stops, a hazard band and a four-tread access stair with rails.
Sample rack wall (UFO Crash Site and Recovery Facility)
A 2.4 by 2.3 m sample rack: six shelf levels carrying twenty four trays of capped vials, blank shelf labels and a closed top plate.
Analysis bench (UFO Crash Site and Recovery Facility)
A 2.8 m laboratory bench: a cupboard base with three drawer lines, a fume hood with a glass sash and extract duct over the left half, a reagent shelf, an instrument case, a microscope, four capped sample vials and two stools.
Control console bank (UFO Crash Site and Recovery Facility)
A five-position curved console bank on a 3.6 m radius: raked instrument panels with lit faces, upright screens, keyboard shelves, a cable tray under the desks and two five-star operator chairs.
Cryogenic pod (UFO Crash Site and Recovery Facility)
A 2.6 m cryogenic pod on a steel cradle at 9 degrees head-up: a rounded outer shell, a frosted lid on a hinged node, a foot-end compressor with coiled lines and two lit control panels.
Examination table (UFO Crash Site and Recovery Facility)
A 2.3 m stainless examination table on a pedestal column and ram: a dished top with side rails, a centre drain channel running to a floor sump, an articulated two-link overhead lamp on its own floor post and a three-shelf instrument trolley on castors.
Specimen tank, empty (UFO Crash Site and Recovery Facility)
A 3 m containment tank standing empty: a machined plinth, a double glass cylinder over a lit fluid column, a bolted cap, three service pipes with valve blocks and a status panel.
Specimen tank with suspended mass (UFO Crash Site and Recovery Facility)
The same tank with an abstract dark mass suspended in the column. The mass is a smooth non-representational form, not an organism.
Cargo net and slings (UFO Crash Site and Recovery Facility)
Lifting tackle laid out on the ground: a folded cargo net of nine by seven cords over a low pile, four coiled strops with thimbles and shackles, a master link and two spreader bars.