Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
12,782 free GLB models
AnimatedCarbon dioxide cylinder rack (Vertical Farm and Hydroponics Tower)
A six cylinder carbon dioxide rack against the wall: cylinders in two rows behind a restraint bar, a two stage regulator manifold with its blank gauges, a handwheel isolation valve and a warning plate left blank.
AnimatedAir handling unit (Vertical Farm and Hydroponics Tower)
A 2.4 m packaged air handling unit on a plinth: filter, coil and fan sections, a hinged access door with a sight port, the supply fan behind the guard turning, and spigots on both ends for the duct run.
AnimatedGrow room dehumidifier (Vertical Farm and Hydroponics Tower)
A floor standing grow room dehumidifier on castors: a louvred discharge with a fan behind it that spins, a condensate drawer that pulls out at the foot, a blank humidity readout and the drain hose spigot at the back.
AnimatedReverse osmosis rack (Vertical Farm and Hydroponics Tower)
A framed reverse osmosis set: six membrane vessels in two banks on a galvanised frame, the high pressure pump at the foot with a turning rotor, a pre filter pair, a handwheel on the concentrate line and a blank instrument panel.
AnimatedPump and filter set (Vertical Farm and Hydroponics Tower)
A skid of two centrifugal circulation pumps on their plinth with a duty and standby arrangement, two sand filters on legs beside them, isolation handwheels either side and a pressure gauge board. The pump rotors and the handwheels turn.
AnimatedNutrient reservoir tank (Vertical Farm and Hydroponics Tower)
A 2 m by 1.4 m nutrient reservoir: a white tank 1.2 m deep on a bunded plinth with the solution level modelled, an inspection lid that lifts, a sight glass up one end and the suction and return flanges on the near face.
AnimatedNutrient dosing skid (Vertical Farm and Hydroponics Tower)
A skid mounted dosing set: three stock tanks of concentrate and acid on a bunded base frame, four peristaltic dosing pumps whose rotors turn, a mixing manifold with a handwheel valve and a blank control fascia.
UV steriliser (Vertical Farm and Hydroponics Tower)
An inline ultraviolet steriliser: a stainless chamber on a wall frame with the lamp end caps, the flow in and out flanges, a blank hour counter box and the ballast enclosure under it.
AnimatedWash and spin station (Vertical Farm and Hydroponics Tower)
A 2 m wash line: a deep stainless wash sink with the water modelled, a swan neck tap, and a spin dryer alongside whose lid lifts and whose perforated basket spins, with a drained crate on the drainer.
AnimatedPallet and stretch wrapper (Vertical Farm and Hydroponics Tower)
A stretch wrapping station: a plastic pallet of crates standing on a turntable that spins, with the film carriage on its mast alongside and a part wrapped film skirt round the bottom courses.
Packing bench (Vertical Farm and Hydroponics Tower)
A 2 m packing bench: a checkweigher with a blank readout, a bagging chute, a roll of film on its spindle, two crates of cut leaf below and a stack of flat packed boxes at the end.
AnimatedHarvest bench with conveyor stub (Vertical Farm and Hydroponics Tower)
A 2 m harvest bench with a short gravity roller stub running off one end at deck height: a cut tray on the top, a crate catching under the rollers, and the rollers themselves turn.
Transplanting bench (Vertical Farm and Hydroponics Tower)
A 2 m stainless transplanting bench: a plug tray and a part planted grow tray on the top, a rack of spare trays under it, a waste chute at one end and a set of dibbers and a spacing board on the upstand.
Nutrient tote stack (Vertical Farm and Hydroponics Tower)
Two blue 1,000 litre intermediate bulk containers in their galvanised cages on pallets, stacked one on the other, with the outlet valve and a blank label panel on the near face.
Harvest crate stack (Vertical Farm and Hydroponics Tower)
Seven harvest crates staged between cuts: five on a low dolly, cropped at the bottom and empty above, with a pair more stood on the floor alongside.
Harvest crate, empty (Vertical Farm and Hydroponics Tower)
The same vented harvest crate washed and empty, ready to go back to the line. Blank faces, stacking rim, moulded hand holds.
Harvest crate (Vertical Farm and Hydroponics Tower)
A single vented harvest crate 600 by 400 by 290 mm with moulded hand holds and a stacking rim, filled with cut lettuce. The crate face is blank: no grower, packer or retailer mark anywhere.
Grow tray, ready to harvest (Vertical Farm and Hydroponics Tower)
The growing tray at harvest: twelve full heads of loose leaf lettuce closed into a canopy that fills the tray. The third of three crop states, and the one a harvest bench is dressed with.
Grow tray, half grown (Vertical Farm and Hydroponics Tower)
The same growing tray a fortnight in: twelve lettuce at about half size, the leaves still clear of each other so the grid of plants is readable. The second of three crop states.
AnimatedGermination chamber (Vertical Farm and Hydroponics Tower)
A 1.2 m insulated germination cabinet on castors: twin doors with gasket seals, five shelf levels of sown plug trays inside, a blank set point display on the fascia and the refrigeration cowl on top.
AnimatedSeedling propagation tray with dome (Vertical Farm and Hydroponics Tower)
The same 600 mm plug tray a week on, with seedlings through the rockwool and a clear vented propagation dome over them. The dome lifts off on its back edge.
Rockwool plug tray (Vertical Farm and Hydroponics Tower)
A 600 mm by 400 mm propagation tray of forty rockwool plugs, freshly sown: the plugs sit proud of a black carry tray with its stacking rim, and nothing is up yet.
Grow tray, freshly sown (Vertical Farm and Hydroponics Tower)
A 1.2 m by 0.8 m stainless growing tray at the start of a cycle: forty rockwool plugs sown out on their grid and nothing above the surface yet. The first of three crop states of the same tray.
AnimatedAeroponic mist chamber (Vertical Farm and Hydroponics Tower)
A sealed aeroponic root chamber 1.6 m by 1 m on a stand, with a hinged access door, two misting lines on their manifold inside, a bare root curtain hanging from the lid grid and a collection sump with a return fitting.