Free models · CC0
Props
Every realistic prop below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
2,495 free GLB models
Specimen tank, empty (UFO Crash Site and Recovery Facility)
A 3 m containment tank standing empty: a machined plinth, a double glass cylinder over a lit fluid column, a bolted cap, three service pipes with valve blocks and a status panel.
Specimen tank with suspended mass (UFO Crash Site and Recovery Facility)
The same tank with an abstract dark mass suspended in the column. The mass is a smooth non-representational form, not an organism.
Cargo net and slings (UFO Crash Site and Recovery Facility)
Lifting tackle laid out on the ground: a folded cargo net of nine by seven cords over a low pile, four coiled strops with thimbles and shackles, a master link and two spreader bars.
Transport crate (UFO Crash Site and Recovery Facility)
A 6.2 m ribbed steel transport crate for a recovered hull section: corrugated sides, eight corner castings with lifting eyes, latching bars, a hazard chevron band and a blank data plate.
Survey marker set (UFO Crash Site and Recovery Facility)
Six folded evidence markers with blank number plates, six flagged survey stakes, a banded ranging pole and a tape reel, arranged as a working set over a 4 m area.
Sensor tripod (UFO Crash Site and Recovery Facility)
A 2 m survey tripod with footed legs, a spreader brace, an instrument head with a lens and a status lamp, a whip antenna and a battery case on the ground.
Site floodlight rig (UFO Crash Site and Recovery Facility)
A towable lighting tower: wheeled base with four outrigger feet, a generator housing, a two-stage telescopic mast and a crossbar carrying four lamp heads on a single hinged node.
Tarpaulin cover on a frame (UFO Crash Site and Recovery Facility)
A 5.3 m scaffold frame with a ridge bar and a sagging tarpaulin thrown over it, guyed to four ground pins, for covering a wreck piece in the open.
Debris scatter cluster (UFO Crash Site and Recovery Facility)
A 6 m scatter of twenty two hull shards in two alloy finishes plus five twisted spars, laid flat as they fell for dressing a crash site.
Fragment embedded in soil (UFO Crash Site and Recovery Facility)
A 2.4 m curved hull shard driven upright into a churned mound of earth, with a bent stringer and a torn dark panel still attached.
Internal frame piece (UFO Crash Site and Recovery Facility)
A 70 degree arc of internal hull frame: two ring frame tubes joined by five uprights, three snapped radial stringers and a remnant of outer skin still bolted to the outer face.
Detached landing leg (UFO Crash Site and Recovery Facility)
A landing leg torn from its bay and lying on the ground: oleo strut, ankle joint, circular foot pad, the ripped mounting yoke that came away with it and two severed hydraulic lines.
Torn outer panel section (UFO Crash Site and Recovery Facility)
A 2.4 m outer skin panel buckled by the impact: the plate is folded through two waves, its edges are ragged where the fasteners let go, the sheet has real thickness at the tear and three internal ribs are still riveted to the back.
Large hull fragment (UFO Crash Site and Recovery Facility)
A 3 m piece of saucer rim torn from a 12 m disc: the machined rim edge, the panelled deck skin above it and the darker lower skin below, with the true hull wall thickness at every torn boundary and three snapped stringers still attached inside.
Cutaway hull section (UFO Crash Site and Recovery Facility)
A 100 degree wedge cut from a scout hull and mounted on a steel cradle for study: outer and inner skins with their true wall thickness, three ring frames, six radial ribs, a deck plate and a glowing conduit run.
Recovered engine core assembly (UFO Crash Site and Recovery Facility)
A 2.7 m drive core lifted out of a hull and set on its transport frame: a vertical toroid with two glowing race rings, a gimballed inner sphere in a steel yoke, four support legs and two conduits cut where they left the airframe.
Round bale stack (Arable Fields and Farm Machinery)
A stack of nine net-wrapped round bales, four at the base and tapering to two on top, each about 1.3 m across and 1.2 m wide.
Bunded farm fuel tank (Arable Fields and Farm Machinery)
A static bunded farm diesel tank on a concrete plinth: a lofted cylindrical tank with banding rings and a filler hatch, a pump cabinet with a hose, a hose reel and an access platform with steps and a handrail.
Square bale stack (Arable Fields and Farm Machinery)
A stack of twenty conventional rectangular straw bales laid in four courses with twine visible on each bale.
Irrigation pivot span (Arable Fields and Farm Machinery)
A twelve metre centre-pivot irrigation span: a water pipe under a bracing truss with cross ties, nine sprinkler drops on goosenecks, and an A-frame drive tower on two lug wheels.
Five-bar field gate, open (Arable Fields and Farm Machinery)
The five-bar field gate swung open on its hinge post, clearing the gateway.
Five-bar field gate, closed (Arable Fields and Farm Machinery)
A 3.5 m tubular five-bar field gate hung between two round posts, with diagonal bracing, hinge straps and a latch; the gate leaf turns on its own hinge pivot.
Post and wire fence run, 8 m (Arable Fields and Farm Machinery)
An 8 m stock fence run: seven round timber posts, four line wires, close verticals forming netting in the lower half and a braced strainer at each end.
Loader pallet forks (Arable Fields and Farm Machinery)
A loader pallet fork attachment: a fabricated headstock with a back frame, two adjustable tine carriers, forged tines and pin bosses; stands on its tines.