3DAssets.dev

Loading model

About

A working tented camp on a 42 m square of red savanna. Four canvas guest tents stand along the front with their flaps tied back, each on its own deck with a bed under a net frame, a wash stand and a lantern, linked by a raised walkway to the fire. The lodge front and its open veranda close the back of the camp beside two thatched rondavels, and the middle is the living side: a stone ringed fire with log seats round it, a dining table and chairs on a timber deck under a large acacia, the kitchen boma with its grill and hanging pot, the prep table, the water filter and the cooler. Power and water stand behind the kitchen, a solar panel and battery box, the header tank on its stand and the water bowser, with a store roofed in three bays of thatch. The game drive vehicle waits on the track by the gate with its jerrycans, spare wheel and a field desk beside it, the bush track runs in from the front through a blank signed gate in a pole and wire fence, and a boma of thorn brush closes the camp behind the kitchen. Round it all is open bush: acacias, a baobab, scrub, grass tufts, termite mounds, a sand river across one corner, a sunken water hole in another and bleached bones in the dust. No animals: the catalogue supplies those in its savanna wildlife pack.

Use with an AI agent

Copy this prompt into your AI chat, then describe what you want to build with the asset.

Use the “Tented Safari Camp and Bush Lodge (Safari Camp and Bush Lodge)” asset in my project.

Model: https://cdn.3dassets.dev/assets/37720/v1/model.glb
Asset page: https://3dassets.dev/assets/safari-camp-and-bush-lodge-tented-safari-5f4f91f6-starter-scene
Description: A working tented camp on a 42 m square of red savanna. Four canvas guest tents stand along the front with their flaps tied back, each on its own deck with a bed under a net frame, a wash stand and a lantern, linked by a raised walkway to the fire. The lodge front and its open...

- Dimensions (X × Y × Z): 46.863 × 9.027 × 43.981 metres
- Triangles: 19.4k
- Animations: none
- Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/)
- Loading: Three.js GLTFLoader; no additional decoders required.

Also available as JSON, Markdown, or via the MCP server.

Import manually

Choose your framework, then copy the code into your project to load the asset.

import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'

const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/37720/v1/model.glb', (gltf) => {
  scene.add(gltf.scene)
})

Common questions

How do I use this model with my AI development tools?
Press "Copy for AI agent" above and paste the prompt into Claude Code, Cursor, Codex, GitHub Copilot, ChatGPT or any other coding assistant. The prompt carries the direct CDN URL, the real-world size, the licence and the loading notes, so the assistant can fetch the model and place it in your project without you writing the loader yourself. For a permanent connection, add the 3DAssets.dev MCP server to your tool with one command (for Claude Code: claude mcp add --transport http 3dassets https://3dassets.dev/mcp) and the assistant can then search the whole catalogue, fetch files and read the usage snippets on its own.

MCP server setupGuide for AI agents

How do I get started?
Three ways, from quickest to most automatic. Download the .glb with the button and drop it into your engine's asset folder, where it imports like any glTF file. Or skip the download: copy the three.js, React Three Fiber or model-viewer snippet under "Import manually", which loads the model straight from the CDN. Or connect your AI agent to the MCP server and ask for it by name, and it will find, fetch and place the model for you.

MCP server setupAPI reference

Which game engines and tools can I use this model with?
Anything that reads glTF, which today means all of the major ones: three.js and React Three Fiber on the web, Godot 4, Unity, Unreal Engine 5, Blender and the model-viewer web component. The model is a self-contained binary glTF (.glb) with textures embedded, so there is one file to import and no plugin, converter or decoder to install first.
How do I import this model into Unity, Godot, Unreal or Blender?
Unity: install the glTFast package (com.unity.cloud.gltfast) from the Package Manager, drop the .glb into Assets and drag the prefab in, or load it at runtime from the CDN URL. Godot 4: copy the file into the project folder and the editor imports it as a scene you can instantiate. Unreal Engine 5: File > Import with the built-in glTF importer, which converts the axes for you. Blender: File > Import > glTF 2.0. Units are metres with +Y up in the file, and every importer above handles the conversion to its own axes automatically.
Can I use this model in a commercial game, and do I need to credit anyone?
Yes to commercial use and no to credit. Every model on 3DAssets.dev is released under CC0 1.0 Universal, which places it in the public domain: use it in a paid game, an app, a film or a client project, modify it, redistribute it, and put nothing in the credits. A link back is welcome but it is entirely your choice.

CC0 licence text

Can I load it from the CDN instead of downloading it?
Yes. The .glb file has a permanent URL on cdn.3dassets.dev that is CORS-enabled and never changes content, so you can pass it straight to GLTFLoader, glTFast or model-viewer in production and cache it as hard as you like. Downloading is only needed for engines that import from disk.
Do I need Draco, Meshopt or KTX2 to load it?
No. The geometry is quantized with KHR_mesh_quantization and the textures are re-encoded to WebP, both of which three.js, Godot, Unity and Blender read natively, so a plain GLTFLoader is enough. There is nothing extra to configure and no decoder to ship with your bundle.

Tented Safari Camp and Bush Lodge (Safari Camp and Bush Lodge)

A working tented camp on a 42 m square of red savanna. Four canvas guest tents stand along the front with their flaps tied back, each on its own deck with a bed under a net frame, a wash stand and a lantern, linked by a raised walkway to the fire. The lodge front and its open...

Download asset · 1.0 MB

More in Environments & Scenes

Gaming Floor (Casino Floor and Back Rooms)

Gaming Floor (Casino Floor and Back Rooms)

Gaming floor demonstration: a pit of blackjack, roulette, craps and poker tables with dealer chairs and stools on patterned carpet, a slot bank and machine row beyond, a bar with back bar and lounge seating, rope stanchions marking the pit, and the cashier cage on the back...

@3dassets20.9k tris · 44 ↓
Working Fishing Harbor (Fishing Harbour and Boats)

Working Fishing Harbor (Fishing Harbour and Boats)

A complete miniature harbor with tackle shop, open boathouse, joined quay and piers, moored cabin launch, market, and fishing activity.

@3dassets46.3k tris · 44 ↓
Metro station with an island platform and units at both faces (Modern Rail and Metro Network)

Metro station with an island platform and units at both faces (Modern Rail and Metro Network)

A two track metro station: an island platform with canopies, seating, displays, a shelter, a gate line and an end ramp, slab track each side and a two car metro unit standing at each face, one with its doors open. A glazed lift shaft and a stair flight on the deck give access...

@3dassets22.5k tris · 43 ↓
Departures Concourse (Airport Terminal and Ground Operations)

Departures Concourse (Airport Terminal and Ground Operations)

A 32 by 28 metre departures concourse floored on the 4 m tile grid: a row of staffed check-in desks with self-service kiosks and bag drop units behind a managed queue, three security lanes with tray return trolleys, a gate lounge of beam seating around a gate desk, retail and...

@3dassets12.6k tris · 40 ↓
Lunar Colony Overview (Moon Base Colony and Lunar Rovers)

Lunar Colony Overview (Moon Base Colony and Lunar Rovers)

A working surface base: two tunnel junctions link a crew habitat, an inflatable dome, an observation turret, a greenhouse, a medical module, a regolith shielded habitat, an airlock and a vehicle workshop, every mate made through the hab-port interface 2.4 m above the...

@3dassets71.3k tris · 39 ↓
Resort Base Area (Ski Resort and Snow Park)

Resort Base Area (Ski Resort and Snow Park)

Base area on a 40 by 48 m tile grid: lift drive terminal with queue maze and pass gates, a 12 m cable span with two hanging chairs, lodge hall with wing, rental shop with racks, ticket office, bus stop with shuttle, groomer and slope-side furniture. Static layout; no...

@3dassets10.3k tris · 38 ↓
Checkpoint to Safehouse (Zombie Quarantine Streets)

Checkpoint to Safehouse (Zombie Quarantine Streets)

A clear3m+ inspection route through a gate and canopy towards a braced safehouse, with separated triage and supplies.

@3dassets1.4k tris · 37 ↓
Working Airfield At Dusk (Aircraft Fleet and Airfield)

Working Airfield At Dusk (Aircraft Fleet and Airfield)

A whole general aviation airfield laid out tight as one place: a 70 metre lit runway with a threshold at each end, a parallel taxiway turning north into a twenty four bay apron, a hangar built from its arch modules and closed at both ends with a light single half out of the...

@3dassets327k tris · 34 ↓
Body to Finish Line (Car Factory Production Line)

Body to Finish Line (Car Factory Production Line)

A 48 by 18 m car assembly plant built from the hall kit: nine roof trusses on twenty two steel columns, a closed back wall and both end walls with a roller shutter, a window band and personnel doors, a deck and ridge lantern roof over the back half and a mezzanine walkway...

@3dassets146k tris · 20 ↓
Walled Market Quarter (Fantasy MMO City And Townsfolk)

Walled Market Quarter (Fantasy MMO City And Townsfolk)

A hand painted fantasy city quarter inside a forty eight metre circuit of curtain wall, with a wall walk on corbels, arrow loops, four quoined corner towers, two round flanking towers, a postern in the west wall and the great gatehouse in the south wall, its portcullis and...

@3dassets303k tris · 12 ↓
Framing Cell and Press Feed (Car Factory Production Line)

Framing Cell and Press Feed (Car Factory Production Line)

A single 20 by 12 m body shop cell on the plant floor: seven skid conveyor sections carry a body in white on its carrier skid through the framing gate, three welding robots work it from inside a run of yellow guarding with an access gate, and the panel racks, blank stack and...

@3dassets50.6k tris · 12 ↓
Fortified forest outpost (FPS Survival Forest Outpost)

Fortified forest outpost (FPS Survival Forest Outpost)

A free survival game scene: a fortified scavenger outpost in dense conifer forest around a half derelict research station. A ring of timber palisade and chain link closes a 28 by 20 metre compound, with a two leaf palisade gate on the south track under a lit red lamp and...

@3dassets383k tris · 11 ↓

Similar assets

Small Canvas Safari Tent on Deck (Safari Camp and Bush Lodge)Animated

Small Canvas Safari Tent on Deck (Safari Camp and Bush Lodge)

A 2.4 by 2.4 m cream canvas ridge tent on a 3.1 by 3.1 m boarded deck raised 0.34 m on stump piers, with a 2.2 m ridge, a pegged guy rope at each corner and two door flaps on the doorway jambs. The flaps are the only moving parts; the canvas is solid.

@3dassets428 tris
Large Canvas Safari Tent on Deck (Safari Camp and Bush Lodge)Animated

Large Canvas Safari Tent on Deck (Safari Camp and Bush Lodge)

A 3.2 by 3 m cream canvas ridge tent on a 4 by 3.8 m boarded deck raised 0.34 m on stump piers, with a 2.5 m ridge, a pegged guy rope at each corner and two door flaps on the doorway jambs. The flaps are the only moving parts; the canvas is solid.

@3dassets452 tris
Large Canvas Safari Tent, Flaps Open (Safari Camp and Bush Lodge)

Large Canvas Safari Tent, Flaps Open (Safari Camp and Bush Lodge)

The same tent with both door flaps swung open and held back off the deck, so the bed and the wash stand inside read from the front. The open pose is modelled, so this variant ships no clip.

@3dassets452 tris
Small Canvas Safari Tent, Flaps Open (Safari Camp and Bush Lodge)

Small Canvas Safari Tent, Flaps Open (Safari Camp and Bush Lodge)

The same tent with both door flaps swung open and held back off the deck, so the bed and the wash stand inside read from the front. The open pose is modelled, so this variant ships no clip.

@3dassets428 tris
Savanna Ground Module, Dust (Safari Camp and Bush Lodge)

Savanna Ground Module, Dust (Safari Camp and Bush Lodge)

A 6 m square of bare red savanna dust 0.12 m thick, with five flat patches of low scrub and a few embedded stones. Edge ports on all four sides tile it into a continuous ground with the track, riverbed and water hole modules.

@3dassets168 tris
Tent Awning and Guy Set (Safari Camp and Bush Lodge)

Tent Awning and Guy Set (Safari Camp and Bush Lodge)

A 3.2 by 2.2 m canvas shade fly on two front poles, falling 0.3 m from back to front so water runs off, with a valance down each side and two guyed pegs. Stands in front of a tent or over a table. Static: canvas and guys need a joint per element.

@3dassets140 tris
Canvas Wash Stand and Jug (Safari Camp and Bush Lodge)

Canvas Wash Stand and Jug (Safari Camp and Bush Lodge)

A 0.78 m tented bathroom wash stand: a canvas basin slung in a timber ring on a three legged frame, with a galvanised jug beside it and a towel over the lower rail. The canvas and the towel are modelled solid and stated as static.

@3dassets252 tris
Folding Camp Chair (Safari Camp and Bush Lodge)

Folding Camp Chair (Safari Camp and Bush Lodge)

A crossed leg timber camp chair with a canvas seat and back and two flat arms, 0.58 m wide and 0.86 m to the top of the back. Static geometry: a folding chair folds on four joints and a rigid node cannot give them.

@3dassets192 tris
Camp Dining Table and Chairs (Safari Camp and Bush Lodge)

Camp Dining Table and Chairs (Safari Camp and Bush Lodge)

A 2.2 by 1.1 m slatted timber dining table 0.76 m high laid with a runner, two lanterns and four plates, with four folding camp chairs round it. Stands under a tree or an awning. Static geometry; the chairs are modelled in place.

@3dassets1.3k tris
Camp Bed with Mosquito Net Frame (Safari Camp and Bush Lodge)

Camp Bed with Mosquito Net Frame (Safari Camp and Bush Lodge)

A 1 by 2 m canvas camp bed on splayed timber legs with a rolled blanket and a pillow, standing inside a 1.5 m steel net frame with the mosquito net gathered into a valance under the top rail and tied back at the corners. The netting is solid geometry and does not move.

@3dassets316 tris
Lodge Main Building Front and Veranda (Safari Camp and Bush Lodge)

Lodge Main Building Front and Veranda (Safari Camp and Bush Lodge)

A 7.2 m bush lodge frontage: rendered earth walls 2.9 m high with two window openings and a wide doorway, an open sided boarded veranda 2.6 m deep on five posts, and a thatched pitch falling forward over it. Open fronted, so it reads from a walking camera. Static geometry.

@3dassets528 tris
Camp Water Filter Stand (Safari Camp and Bush Lodge)

Camp Water Filter Stand (Safari Camp and Bush Lodge)

A 1.15 m four legged timber stand carrying a galvanised gravity filter with a short outlet tap, a canvas bucket underneath and a cloth hung on the front rail. Static geometry.

@3dassets276 tris