3DAssets.dev

Loading model

About

Tape dispenser with water trough, feed slot and a cream tape roll riding on its axle. Dimensions 0.31 × 0.25 × 0.27 m (X × Y × Z). Metre units, +Y up, +Z front; origin on the ground at the footprint centre unless stated. Original walnut, maple, ivory, graphite and brass palette. Static geometry; no rig, animation, collision or navigation data. Static staged equipment only; no heat, vacuum or adhesive simulation, craft recipes or certification.

Use with an AI agent

Copy this prompt into your AI chat, then describe what you want to build with the asset.

Use the “Paper Tape Wetting Dispenser (Marquetry and Veneer Inlay Workshop)” asset in my project.

Model: https://cdn.3dassets.dev/assets/39102/v1/model.glb
Asset page: https://3dassets.dev/assets/marquetry-and-veneer-inlay-workshop-paper-tape-wetting-1cfae913
Description: Tape dispenser with water trough, feed slot and a cream tape roll riding on its axle.

- Dimensions (X × Y × Z): 0.31 × 0.255 × 0.27 metres
- Triangles: 920
- Animations: none
- Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/)
- Loading: Three.js GLTFLoader; no additional decoders required.

Also available as JSON, Markdown, or via the MCP server.

Import manually

Choose your framework, then copy the code into your project to load the asset.

import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'

const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/39102/v1/model.glb', (gltf) => {
  scene.add(gltf.scene)
})

Common questions

How do I use this model with my AI development tools?
Press "Copy for AI agent" above and paste the prompt into Claude Code, Cursor, Codex, GitHub Copilot, ChatGPT or any other coding assistant. The prompt carries the direct CDN URL, the real-world size, the licence and the loading notes, so the assistant can fetch the model and place it in your project without you writing the loader yourself. For a permanent connection, add the 3DAssets.dev MCP server to your tool with one command (for Claude Code: claude mcp add --transport http 3dassets https://3dassets.dev/mcp) and the assistant can then search the whole catalogue, fetch files and read the usage snippets on its own.

MCP server setupGuide for AI agents

How do I get started?
Three ways, from quickest to most automatic. Download the .glb with the button and drop it into your engine's asset folder, where it imports like any glTF file. Or skip the download: copy the three.js, React Three Fiber or model-viewer snippet under "Import manually", which loads the model straight from the CDN. Or connect your AI agent to the MCP server and ask for it by name, and it will find, fetch and place the model for you.

MCP server setupAPI reference

Which game engines and tools can I use this model with?
Anything that reads glTF, which today means all of the major ones: three.js and React Three Fiber on the web, Godot 4, Unity, Unreal Engine 5, Blender and the model-viewer web component. The model is a self-contained binary glTF (.glb) with textures embedded, so there is one file to import and no plugin, converter or decoder to install first.
How do I import this model into Unity, Godot, Unreal or Blender?
Unity: install the glTFast package (com.unity.cloud.gltfast) from the Package Manager, drop the .glb into Assets and drag the prefab in, or load it at runtime from the CDN URL. Godot 4: copy the file into the project folder and the editor imports it as a scene you can instantiate. Unreal Engine 5: File > Import with the built-in glTF importer, which converts the axes for you. Blender: File > Import > glTF 2.0. Units are metres with +Y up in the file, and every importer above handles the conversion to its own axes automatically.
Can I use this model in a commercial game, and do I need to credit anyone?
Yes to commercial use and no to credit. Every model on 3DAssets.dev is released under CC0 1.0 Universal, which places it in the public domain: use it in a paid game, an app, a film or a client project, modify it, redistribute it, and put nothing in the credits. A link back is welcome but it is entirely your choice.

CC0 licence text

Can I load it from the CDN instead of downloading it?
Yes. The .glb file has a permanent URL on cdn.3dassets.dev that is CORS-enabled and never changes content, so you can pass it straight to GLTFLoader, glTFast or model-viewer in production and cache it as hard as you like. Downloading is only needed for engines that import from disk.
Do I need Draco, Meshopt or KTX2 to load it?
No. The geometry is quantized with KHR_mesh_quantization and the textures are re-encoded to WebP, both of which three.js, Godot, Unity and Blender read natively, so a plain GLTFLoader is enough. There is nothing extra to configure and no decoder to ship with your bundle.

Paper Tape Wetting Dispenser (Marquetry and Veneer Inlay Workshop)

Tape dispenser with water trough, feed slot and a cream tape roll riding on its axle.

Download asset · 21.1 KB

More in Props & Furniture

Stocked Surfboard Rack (Beach Surf and Paddle Kit)

Stocked Surfboard Rack (Beach Surf and Paddle Kit)

The freestanding surfboard rack stocked for hire: shortboard, fish, soft top learner and longboard standing tail down in the four slots.

@3dassets16.8k tris · 190 ↓
Dune Grass Tuft (Beach Surf and Paddle Kit)

Dune Grass Tuft (Beach Surf and Paddle Kit)

Marram dune grass tuft: 26 tapered curling blades and four seed heads rising from a low sand mound.

@3dassets1.4k tris · 180 ↓
Swim Zone Buoy Orange (Beach Surf and Paddle Kit)

Swim Zone Buoy Orange (Beach Surf and Paddle Kit)

Sun yellow variant of the swim zone marker buoy with a coral cross topmark.

@3dassets1.4k tris · 173 ↓
Beach Umbrella (Beach Surf and Paddle Kit)

Beach Umbrella (Beach Surf and Paddle Kit)

2.4 m beach umbrella: sand anchor with base plate, steel lower pole with tilt collar and knob, timber upper pole, runner and stretchers, eight steel ribs under alternating coral and foam panels with a scalloped valance, vent cap and finial.

@3dassets2.1k tris · 168 ↓
Dune Fence Run (Beach Surf and Paddle Kit)

Dune Fence Run (Beach Surf and Paddle Kit)

2.6 m dune wind fence: three round timber posts, twin twisted wire lines at three heights and weathered grey slats set at slightly uneven heights.

@3dassets2.2k tris · 164 ↓
Driftwood Log (Beach Surf and Paddle Kit)

Driftwood Log (Beach Surf and Paddle Kit)

2.8 m weathered driftwood log: twisted tapering trunk, two branch stubs, a splayed root end and one sawn end showing the grain.

@3dassets600 tris · 157 ↓
Folding Beach Chair (Beach Surf and Paddle Kit)

Folding Beach Chair (Beach Surf and Paddle Kit)

Low folding beach chair: steel tube frame with feet, timber armrests and a striped coral and foam sling seat that sags into the back.

@3dassets1.2k tris · 156 ↓
Warning Flag Pole (Beach Surf and Paddle Kit)

Warning Flag Pole (Beach Surf and Paddle Kit)

3.1 m warning flag pole: the patrol pole with a solid coral no swimming flag and coral finial.

@3dassets742 tris · 153 ↓
Full size open net soccer goal (Football Soccer Stadium and Club Grounds)

Full size open net soccer goal (Football Soccer Stadium and Club Grounds)

Goal with 7.32 m clear width, 2.44 m clear height, 2 m deep open cord net and tubular frame.

@3dassets2.1k tris · 150 ↓
Surf Wax Kit (Beach Surf and Paddle Kit)

Surf Wax Kit (Beach Surf and Paddle Kit)

Surf wax kit lying on the sand: sun yellow wax puck in a paper wrapper, a coral base coat bar and a toothed teal wax comb.

@3dassets1.5k tris · 148 ↓
Lifeguard Megaphone (Beach Surf and Paddle Kit)

Lifeguard Megaphone (Beach Surf and Paddle Kit)

Handheld lifeguard megaphone resting on its grip: coral flared bell with grille, battery housing, pistol grip and trigger, siren switch and carry strap.

@3dassets956 tris · 144 ↓
T shirt on a hanger (Clothing Rail and Wardrobe)

T shirt on a hanger (Clothing Rail and Wardrobe)

A terracotta t shirt hanging on a slim velvet hanger: a shaped shell with shoulders, a slight body taper, short sleeves with turned cuffs and a ribbed crew neck, in the settled shape a jersey tee takes on a rail.

@3dassets1.0k tris · 120 ↓

Similar assets

Wrapping Paper Dispenser (Candlemaking and Soap Workshop)

Wrapping Paper Dispenser (Candlemaking and Soap Workshop)

Table paper dispenser with thick paper roll on an axle, upright end brackets, feed sheet and full-width cutting bar.

@3dassets1.7k tris · 24 ↓
Repair Tape Dispenser (Public Library and Reading Garden)

Repair Tape Dispenser (Public Library and Reading Garden)

Weighted repair tape dispenser with supported roll axle, hollow tape core, side cheeks and modeled cutting teeth.

@3dassets1.9k tris · 23 ↓
Water Lifting Wheel (Roman Bathhouse and Palaestra)Animated

Water Lifting Wheel (Roman Bathhouse and Palaestra)

A timber water lifting wheel 3.1 m across on two tufa piers, with twelve rim buckets on a lead axle over a feed trough. The wheel is one named node and spins on its axle; the water in the trough is a still slab, and nothing pours, because a falling stream is not geometry.

@3dassets1.0k tris · 36 ↓
Mark Spikes and Gaffer Tape (TV Studio and Broadcast Gallery)

Mark Spikes and Gaffer Tape (TV Studio and Broadcast Gallery)

A floor dressing group: two rolls of amber camera tape stood on end, a roll of white tape on its side, a taped presenter mark and a spike line on the floor, and a marker pen. The tape is 96 mm across and sits a couple of millimetres proud of the deck.

@3dassets672 tris · 36 ↓
Water Trough (Horse Stables and Equestrian Yard)

Water Trough (Horse Stables and Equestrian Yard)

Round galvanised water trough with a ball valve stub and water surface.

@3dassets168 tris · 25 ↓
Paper towel dispenser (Office Lobby and Building Facilities)Animated

Paper towel dispenser (Office Lobby and Building Facilities)

A 0.3 m by 0.42 m paper towel dispenser: a chamfered cabinet, a dispense throat and a hinged front cover as a named pivoted node with a key barrel.

@3dassets488 tris · 24 ↓
Twin toilet roll dispenser (Office Lobby and Building Facilities)

Twin toilet roll dispenser (Office Lobby and Building Facilities)

A 0.34 m twin toilet roll dispenser: a chamfered stainless hood on a back plate over two loaded rolls on spindles, with a core cover, a tear bar and a blank accent label.

@3dassets952 tris · 29 ↓
Feed Trough (Pixel Modern Farm)

Feed Trough (Pixel Modern Farm)

Galvanised feed trough on timber feet, filled with a level of feed.

@3dassets72 tris · 18 ↓
Water Trough (Pixel Modern Farm)

Water Trough (Pixel Modern Farm)

Concrete water trough with a filled water level and a ball valve housing.

@3dassets84 tris · 24 ↓
Feed Trough (Farm and Working Animals HD)

Feed Trough (Farm and Working Animals HD)

Two metre timber feed trough on legs, with a shallow feed of chaff along it.

@3dassets304 tris · 18 ↓
Water Trough (Farm and Working Animals HD)

Water Trough (Farm and Working Animals HD)

Galvanised water trough 1.80 m long on stone bearers, filled, with a ballcock feed pipe.

@3dassets148 tris · 30 ↓
Timber Water Trough (Wild West Frontier Town)

Timber Water Trough (Wild West Frontier Town)

Free 3D model of a planked water trough on skids with iron bands and a still water surface. Measures 2.30 by 0.69 by 0.82 m.

@3dassets196 tris · 28 ↓