3DAssets.dev

Loading model

About

Mitre fence with a 45 degree maple guide, clamp post and pad; angle genuine, never implied. Dimensions 0.40 × 0.16 × 0.30 m (X × Y × Z). Metre units, +Y up, +Z front; origin on the ground at the footprint centre unless stated. Original walnut, maple, ivory, graphite and brass palette. Static geometry; no rig, animation, collision or navigation data. Static staged equipment only; no heat, vacuum or adhesive simulation, craft recipes or certification.

Use with an AI agent

Copy this prompt into your AI chat, then describe what you want to build with the asset.

Use the “Mitre Trimming Fence (Marquetry and Veneer Inlay Workshop)” asset in my project.

Model: https://cdn.3dassets.dev/assets/39100/v1/model.glb
Asset page: https://3dassets.dev/assets/marquetry-and-veneer-inlay-workshop-mitre-trimming-fen-931eb9d6
Description: Mitre fence with a 45 degree maple guide, clamp post and pad; angle genuine, never implied.

- Dimensions (X × Y × Z): 0.4 × 0.16 × 0.3 metres
- Triangles: 1.4k
- Animations: none
- Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/)
- Loading: Three.js GLTFLoader; no additional decoders required.

Also available as JSON, Markdown, or via the MCP server.

Import manually

Choose your framework, then copy the code into your project to load the asset.

import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'

const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/39100/v1/model.glb', (gltf) => {
  scene.add(gltf.scene)
})

Common questions

How do I use this model with my AI development tools?
Press "Copy for AI agent" above and paste the prompt into Claude Code, Cursor, Codex, GitHub Copilot, ChatGPT or any other coding assistant. The prompt carries the direct CDN URL, the real-world size, the licence and the loading notes, so the assistant can fetch the model and place it in your project without you writing the loader yourself. For a permanent connection, add the 3DAssets.dev MCP server to your tool with one command (for Claude Code: claude mcp add --transport http 3dassets https://3dassets.dev/mcp) and the assistant can then search the whole catalogue, fetch files and read the usage snippets on its own.

MCP server setupGuide for AI agents

How do I get started?
Three ways, from quickest to most automatic. Download the .glb with the button and drop it into your engine's asset folder, where it imports like any glTF file. Or skip the download: copy the three.js, React Three Fiber or model-viewer snippet under "Import manually", which loads the model straight from the CDN. Or connect your AI agent to the MCP server and ask for it by name, and it will find, fetch and place the model for you.

MCP server setupAPI reference

Which game engines and tools can I use this model with?
Anything that reads glTF, which today means all of the major ones: three.js and React Three Fiber on the web, Godot 4, Unity, Unreal Engine 5, Blender and the model-viewer web component. The model is a self-contained binary glTF (.glb) with textures embedded, so there is one file to import and no plugin, converter or decoder to install first.
How do I import this model into Unity, Godot, Unreal or Blender?
Unity: install the glTFast package (com.unity.cloud.gltfast) from the Package Manager, drop the .glb into Assets and drag the prefab in, or load it at runtime from the CDN URL. Godot 4: copy the file into the project folder and the editor imports it as a scene you can instantiate. Unreal Engine 5: File > Import with the built-in glTF importer, which converts the axes for you. Blender: File > Import > glTF 2.0. Units are metres with +Y up in the file, and every importer above handles the conversion to its own axes automatically.
Can I use this model in a commercial game, and do I need to credit anyone?
Yes to commercial use and no to credit. Every model on 3DAssets.dev is released under CC0 1.0 Universal, which places it in the public domain: use it in a paid game, an app, a film or a client project, modify it, redistribute it, and put nothing in the credits. A link back is welcome but it is entirely your choice.

CC0 licence text

Can I load it from the CDN instead of downloading it?
Yes. The .glb file has a permanent URL on cdn.3dassets.dev that is CORS-enabled and never changes content, so you can pass it straight to GLTFLoader, glTFast or model-viewer in production and cache it as hard as you like. Downloading is only needed for engines that import from disk.
Do I need Draco, Meshopt or KTX2 to load it?
No. The geometry is quantized with KHR_mesh_quantization and the textures are re-encoded to WebP, both of which three.js, Godot, Unity and Blender read natively, so a plain GLTFLoader is enough. There is nothing extra to configure and no decoder to ship with your bundle.

Mitre Trimming Fence (Marquetry and Veneer Inlay Workshop)

Mitre fence with a 45 degree maple guide, clamp post and pad; angle genuine, never implied.

Download asset · 26.1 KB

More in Props & Furniture

Stocked Surfboard Rack (Beach Surf and Paddle Kit)

Stocked Surfboard Rack (Beach Surf and Paddle Kit)

The freestanding surfboard rack stocked for hire: shortboard, fish, soft top learner and longboard standing tail down in the four slots.

@3dassets16.8k tris · 167 ↓
Swim Zone Buoy Orange (Beach Surf and Paddle Kit)

Swim Zone Buoy Orange (Beach Surf and Paddle Kit)

Sun yellow variant of the swim zone marker buoy with a coral cross topmark.

@3dassets1.4k tris · 158 ↓
Dune Grass Tuft (Beach Surf and Paddle Kit)

Dune Grass Tuft (Beach Surf and Paddle Kit)

Marram dune grass tuft: 26 tapered curling blades and four seed heads rising from a low sand mound.

@3dassets1.4k tris · 157 ↓
Dune Fence Run (Beach Surf and Paddle Kit)

Dune Fence Run (Beach Surf and Paddle Kit)

2.6 m dune wind fence: three round timber posts, twin twisted wire lines at three heights and weathered grey slats set at slightly uneven heights.

@3dassets2.2k tris · 148 ↓
Beach Umbrella (Beach Surf and Paddle Kit)

Beach Umbrella (Beach Surf and Paddle Kit)

2.4 m beach umbrella: sand anchor with base plate, steel lower pole with tilt collar and knob, timber upper pole, runner and stretchers, eight steel ribs under alternating coral and foam panels with a scalloped valance, vent cap and finial.

@3dassets2.1k tris · 145 ↓
Full size open net soccer goal (Football Soccer Stadium and Club Grounds)

Full size open net soccer goal (Football Soccer Stadium and Club Grounds)

Goal with 7.32 m clear width, 2.44 m clear height, 2 m deep open cord net and tubular frame.

@3dassets2.1k tris · 140 ↓
Folding Beach Chair (Beach Surf and Paddle Kit)

Folding Beach Chair (Beach Surf and Paddle Kit)

Low folding beach chair: steel tube frame with feet, timber armrests and a striped coral and foam sling seat that sags into the back.

@3dassets1.2k tris · 139 ↓
Driftwood Log (Beach Surf and Paddle Kit)

Driftwood Log (Beach Surf and Paddle Kit)

2.8 m weathered driftwood log: twisted tapering trunk, two branch stubs, a splayed root end and one sawn end showing the grain.

@3dassets600 tris · 139 ↓
Warning Flag Pole (Beach Surf and Paddle Kit)

Warning Flag Pole (Beach Surf and Paddle Kit)

3.1 m warning flag pole: the patrol pole with a solid coral no swimming flag and coral finial.

@3dassets742 tris · 136 ↓
Surf Wax Kit (Beach Surf and Paddle Kit)

Surf Wax Kit (Beach Surf and Paddle Kit)

Surf wax kit lying on the sand: sun yellow wax puck in a paper wrapper, a coral base coat bar and a toothed teal wax comb.

@3dassets1.5k tris · 136 ↓
Lifeguard Megaphone (Beach Surf and Paddle Kit)

Lifeguard Megaphone (Beach Surf and Paddle Kit)

Handheld lifeguard megaphone resting on its grip: coral flared bell with grille, battery housing, pistol grip and trigger, siren switch and carry strap.

@3dassets956 tris · 132 ↓
T shirt on a hanger (Clothing Rail and Wardrobe)

T shirt on a hanger (Clothing Rail and Wardrobe)

A terracotta t shirt hanging on a slim velvet hanger: a shaped shell with shoulders, a slight body taper, short sleeves with turned cuffs and a ribbed crew neck, in the settled shape a jersey tee takes on a rail.

@3dassets1.0k tris · 110 ↓

Similar assets

Shutter Guide Post (Roadside Survival Stops)

Shutter Guide Post (Roadside Survival Stops)

Shutter Guide Post: 0.2 × 3 × 0.2 m nominal survival post assembly.

@3dassets36 tris · 23 ↓
Fence post bundle (Hardware Store and DIY Warehouse)

Fence post bundle (Hardware Store and DIY Warehouse)

A standing bundle of twelve 1.8 m fence posts leaning in a steel hoop cradle: square sawn posts with weathered pointed tops and a floor ring to stop them splaying.

@3dassets894 tris · 23 ↓
Angle Corner Post (Modular Survival Base Builder)

Angle Corner Post (Modular Survival Base Builder)

Angle Corner Post: 0.32 × 2.4 × 0.32 m nominal survival post assembly.

@3dassets36 tris · 33 ↓
Post And Rail Fence Section (Farm and Working Animals HD)

Post And Rail Fence Section (Farm and Working Animals HD)

Three-rail timber paddock fence, 3.00 m between joints, with a half post at each end so two sections make one post.

@3dassets60 tris · 56 ↓
Post And Rail Fence Corner (Farm and Working Animals HD)

Post And Rail Fence Corner (Farm and Working Animals HD)

Corner post with a 1.50 m arm on each side, turning a paddock fence through ninety degrees.

@3dassets108 tris · 29 ↓
Clamp rack with sash clamps, 1.8 m (Woodworking Workshop and Joinery)

Clamp rack with sash clamps, 1.8 m (Woodworking Workshop and Joinery)

Steel A frame clamp rack on castors holding six 1.5 m sash clamps: each clamp is a steel bar with a red head casting, a sliding tail on its pin and a screw with a timber T handle, racked the way a shop keeps them beside the assembly table.

@3dassets624 tris · 32 ↓
Lists Fence Corner Post (Medieval Tournament and Jousting Ground)

Lists Fence Corner Post (Medieval Tournament and Jousting Ground)

Right angle corner newel for the lists fence, with a stone pad, a finial and a blank canvas strip.

@3dassets124 tris · 26 ↓
Blast Fence Panel (Rocket Launch Pad and Gantry)

Blast Fence Panel (Rocket Launch Pad and Gantry)

A 4.4 m blast fence panel, 3.7 m tall: a braced steel frame on two ballast pads carrying a deflection plate with vertical stiffeners and a yellow cap rail. Ported left and right so a blast wall runs as far as the pad needs.

@3dassets168 tris · 27 ↓
Perimeter Fence Panel (Rocket Launch Pad and Gantry)

Perimeter Fence Panel (Rocket Launch Pad and Gantry)

A 4 m security fence panel, 3 m to the top strand: mesh on two rails between posts on ballast pads, with raked arms carrying three strands. Ported left and right so a perimeter is built from repeats.

@3dassets412 tris · 29 ↓
Diagonal Stringing Mitre Jig (Marquetry and Veneer Inlay Workshop)

Diagonal Stringing Mitre Jig (Marquetry and Veneer Inlay Workshop)

Stringing jig with true mirrored 45 degree fences and a clamp post; mitres meet on the diagonal.

@3dassets1.7k tris · 19 ↓
Debris fence corner post (Formula Race Cars and Grand Prix Circuit)

Debris fence corner post (Formula Race Cars and Grand Prix Circuit)

Debris fence corner post in an original generic circuit family.

@3dassets108 tris · 25 ↓
Post and wire fence run, 8 m (Arable Fields and Farm Machinery)

Post and wire fence run, 8 m (Arable Fields and Farm Machinery)

An 8 m stock fence run: seven round timber posts, four line wires, close verticals forming netting in the lower half and a braced strainer at each end.

@3dassets992 tris · 47 ↓