3D Assets
@3dassets
Utility Pole with Transformer (Izakaya Alley and Ramen Shop)
A 6.3 m concrete utility pole for a back alley: a pole mounted transformer can with cooling fins and two bushings on a steel bracket, a timber crossarm with four insulators at 5.4 m, a terminal box and drop cables. Carries a cable span on its top port.
AnimatedAlley Waste Bins (Izakaya Alley and Ramen Shop)
Three 860 mm wheeled trade bins standing in a row against an alley wall, in indigo, green and charcoal for the sorted streams. Each lid is a named node hinged on its back edge, so all three open together on one clip.
AnimatedAir Conditioning Outdoor Unit (Izakaya Alley and Ramen Shop)
A 950 mm split system condenser on two wall brackets: a painted case with a louvred coil, a discharge grille, refrigerant and drain lines and a four bladed fan on its own node. The fan spins; everything else is fixed.
Meter Box and Cable Bundle (Izakaya Alley and Ramen Shop)
The service corner of an alley wall: a steel meter cabinet with a blank abstract door plate and an isolator, a trunking drop beside it and four clipped tails running 3 m up the render to a junction box. Static; nothing here opens.
AnimatedWall Extractor Fan (Izakaya Alley and Ramen Shop)
A 780 mm steel wall extract fan over an alley kitchen: a cased body on two brackets, a weather hood and a five bladed impeller on its own node, so the fan spins without moving the case. Fixed to a wall, origin at the case foot.
Extractor Duct Run (Izakaya Alley and Ramen Shop)
A kitchen extract duct climbing an alley wall: a plenum box off the hot line, an elbow, a 2.6 m insulated riser in flanged sections on wall brackets and a weather cowl at the top. Stands 5.6 m tall against a two storey wall.
AnimatedShopfront Shutter Bay (Izakaya Alley and Ramen Shop)
A 4 m narrow shopfront bay closed by a 3.3 m steel roller shutter in its guide rails, with a shutter box over the opening and a timber reveal behind. The shutter is a named node and runs 2.2 m up behind the fascia.
Shopfront Shutter Bay, Shutter Up (Izakaya Alley and Ramen Shop)
The same 4 m shopfront bay shipped with its roller shutter already run up behind the fascia, so a street can hold open and closed units side by side without an animation player. The shutter node is posed and stays still.
Upper Storey Balcony Bay (Izakaya Alley and Ramen Shop)
A first floor bay with a glazed sliding door onto a 1 m concrete balcony: steel balusters, a top and mid rail and a drying rail carrying three towels. The towels and the laundry are solid and static, because cloth needs a joint per fold.
Alley Roof Cap Bay (Izakaya Alley and Ramen Shop)
A 4 m parapet cap that closes the top of a wall or storey bay: a flat roof deck, a 340 mm parapet with an oversailing coping, a water tank plinth and a vent stack. Sits on the storey port below and tiles end to end.
Alley Floor Slab (Izakaya Alley and Ramen Shop)
A 4 m square of worn alley tarmac with patched joints and a concrete repair, 100 mm thick, ported on all four edges so a run of them lays one continuous surface under a shopfront street.
Alley Wall Bay (Izakaya Alley and Ramen Shop)
A 4 m by 3.2 m rendered alley wall bay with a charcoal plinth, a service band under the eaves and a glazed reveal in a dark timber frame. Tiles end to end and carries a storey or a roof cap on its top port.
Upper Storey Bay (Izakaya Alley and Ramen Shop)
A 4 m by 2.8 m first floor bay over an alley shopfront: rendered wall, a charcoal band at floor level, two sash reveals in dark timber with concrete sills and a cornice under the roof. Stacks on a wall bay and carries a cap.
Alley Kerb and Drain Section (Izakaya Alley and Ramen Shop)
A 4 m run of alley edge: a 140 mm concrete kerb with a coping, a sunken asphalt gutter and a steel gully grate set into it. Ported end to end so kerb sections chain along a shopfront run.
Reference line up (Low Poly Character Figures)
The proportion check, laid out on twelve metres of paving: the T pose and A pose reference figures on the dais, then a front row running child, adult, coat, older figure, builder and barbarian so every build in the pack can be read against the next, a second row of the...
Town plaza crowd (Low Poly Character Figures)
A sixteen metre paved plaza with a brick banded centre, carrying a crowd of fifty four figures from the pack: conversation groups turned in on themselves, a queue at the corner, families crossing, workers at one end and a uniformed group at the other, seated figures on three...
Low Poly Shadow Contact Disc (Low Poly Character Figures)
Flat 0.6 m dark disc, 6 mm thick, to drop under a figure where the renderer has no shadows.
Low Poly Plaza Bench (Low Poly Character Figures)
Public bench with a 0.40 m timber seat on metal legs, sized to the pack's seated figures.
Low Poly Reference Dais (Low Poly Character Figures)
Low two step dais, 4 by 2.4 m and 0.175 m tall, for standing a row of reference figures on.
Low Poly Plaza Paving Square (Low Poly Character Figures)
Four metre paving square, 70 mm thick with a flat top. Lay it edge to edge for a continuous plaza floor.
Low Poly Square Display Plinth (Low Poly Character Figures)
Square display plinth 0.40 m tall with a recessed base and a proud cap. Static.
AnimatedLow Poly Round Display Plinth (Low Poly Character Figures)
Round display plinth 0.38 m tall with a metal capped top that turns, for showing a figure or a prop.
AnimatedLow Poly Wooden Artists Figure (Low Poly Character Figures)
Jointed wooden artist's manikin on a stand, 0.34 m tall, with arms and legs that swing on their pin joints.
AnimatedLow Poly Shop Mannequin On A Turntable (Low Poly Character Figures)
Faceless shop mannequin in an A pose on a turntable base. The mannequin turns on the base; the plinth under it does not.