3D Assets
@3dassets
Demoulding Station (Chocolate and Confectionery Factory)
A demoulding station: a twin roller knock out head on a teal gantry over a dark deck, an emptied mould tray to one side and a kraft tote of turned out bars.
Depositor Head (Chocolate and Confectionery Factory)
A gantry depositor: two teal columns carrying a hopper and a five nozzle head that travels down onto the mould below, with a small abstract dial plate.
Shell Mould Tray (Chocolate and Confectionery Factory)
A teal mould tray of twelve domed praline shells, the round counterpart to the bar tray and the same 0.62 by 0.42 m footprint.
Bar Mould Tray (Chocolate and Confectionery Factory)
A teal polycarbonate mould tray of six segmented chocolate bars, each an invented plain rectangle divided into three fingers.
Moulding Table (Chocolate and Confectionery Factory)
A stainless moulding bench 2.0 m long with an undershelf, three teal trays of cast bars on top and two empty trays stored below.
Enrobing Line Section (Chocolate and Confectionery Factory)
A 2.4 m enrobing section: a wire belt on a teal frame under a curtain head, with coated centres running through and an abstract control plate on the leg.
Cooling Tunnel Section (Chocolate and Confectionery Factory)
A 3.0 m enclosed cooling tunnel: a teal hood over a dark belt with an open mouth at each end, three chiller units on the roof and an abstract dial plate.
Tempering Machine (Chocolate and Confectionery Factory)
A continuous tempering unit: a steel cabinet with a heated bowl and stirrer under a hinged teal lid, an abstract touch panel and a tempered chocolate outlet over a catch pan.
Conche Vat (Chocolate and Confectionery Factory)
A round conche: a teal jacketed vat of chocolate on three legs with a top drive, two shear arms sweeping the base and an abstract dial plate on the side.
Nut Roaster (Chocolate and Confectionery Factory)
A small nut roasting drum on an amber frame with internal vanes, a feed hood, an exhaust pipe and a discharge tray of roasted kernels.
Chocolate Tank With Tap (Chocolate and Confectionery Factory)
A jacketed holding tank of liquid chocolate on three legs, with a hinged teal lid, a level band and a front tap drawing into a small steel pan.
Cocoa Winnower (Chocolate and Confectionery Factory)
A winnowing tower: a cracking head on top, three stacked sorting decks behind a teal casing, a side aspiration fan and a kraft bin catching the nib fraction.
Cocoa Bean Roaster Drum (Chocolate and Confectionery Factory)
A stylised batch roaster: a perforated steel drum on a teal frame with internal lifter vanes, a drive motor, a hot air stack and a small abstract dial panel.
Cocoa Bean Sack Stack (Chocolate and Confectionery Factory)
A stack of six filled hessian cocoa bean sacks on a timber pallet, tied at the neck, with a few spilled beans on the floor beside it.
Cocoa Grinder Mill (Chocolate and Confectionery Factory)
A pin mill that grinds nibs to liquor: a steel grinding chamber on four legs with a teal feed hopper, a three arm rotor inside and a liquor outlet pipe.
Scale line up (Dragons and Wyverns)
The proportion check, on thirty metres of lair floor: the four western age stages in a front row from the 0.6 m hatchling through the 2.6 m juvenile and the 7 m adult to the 11 m elder, a second row of the other four body types at their own adult sizes, the scale reference...
Dragon lair clearing (Dragons and Wyverns)
A thirty metre rocky clearing outside a dragon lair, laid on twenty five six metre floor tiles, with the animals set out on rings round the hoard rather than gathered in the middle so each of them has clear ground round its outline. A cave mouth built up into a rock face...
Scale Reference Figure (Dragons and Wyverns)
Blank 1.75 m human figure in one flat material, for reading the size of every dragon in the pack.
Display Plinth With A Turntable (Dragons and Wyverns)
Round timber plinth 0.86 m tall whose banded top turns on its own node. Stand an egg, a skull or a hatchling on it.
Iron Cage With An Opening Door (Dragons and Wyverns)
Barred iron cage 2.56 m square and 2.6 m high with a timber floor and a door on its own hinge node.
Chain And Shackle Anchor (Dragons and Wyverns)
Stone anchor block with a ring, a run of eight iron chain links across the ground and an open shackle.
Cliff Ledge (Dragons and Wyverns)
Rock shelf 5.6 m wide with its top at 2.5 m and two boulders on the back edge.
Cave Mouth Arch (Dragons and Wyverns)
Rock arch about 10 m wide and 6 m high over a dark opening. A backdrop, not an interior.
Lair Ground Tile (Dragons and Wyverns)
Six metre square of rocky lair floor, 140 mm thick and flat topped, with loose stones scattered on it.