3D Assets
@3dassets
Paint tin, 5 litre (Hardware Store and DIY Warehouse)
A 5 litre paint tin: a rolled seam steel body with a recessed press on lid, a wire bail handle and a grip block, standing 0.34 m to the top of the handle.
PVC pipe bundle (Hardware Store and DIY Warehouse)
A cradled bundle of 3.0 m plastic waste pipe: three courses of hollow tubes in a steel saddle with end caps on the front row and a strap over the top.
Facing brick pack (Hardware Store and DIY Warehouse)
A banded brick pack on a pallet: eleven courses of facing bricks with staggered perpend joints, a loose top course and two steel straps over a shrink wrap skirt.
Insulation roll pack (Hardware Store and DIY Warehouse)
A compressed pack of three mineral wool rolls: soft cylinders squeezed flat against each other inside a wrap sleeve with a carry handle slot.
Fence panel stack (Hardware Store and DIY Warehouse)
A leaning stack of six 1.8 m lap fence panels on a kerb rail: framed panels with overlapping horizontal boards, the faces fanned so each panel edge is visible.
Roof tile pack (Hardware Store and DIY Warehouse)
A pack of interlocking concrete roof tiles: six banks of tiles stood on edge and nested nose to tail on a pallet, wrapped and strapped across the top.
Paving slab pack (Hardware Store and DIY Warehouse)
A pack of 0.6 m paving slabs stood on edge in two banks on a pallet, with a leaning display slab at the front and steel edge protectors under the straps.
Concrete block pack (Hardware Store and DIY Warehouse)
A pack of aerated concrete blocks: five courses of large blocks with staggered joints on a pallet, two straps and a broken top course showing the block faces.
Fence post bundle (Hardware Store and DIY Warehouse)
A standing bundle of twelve 1.8 m fence posts leaning in a steel hoop cradle: square sawn posts with weathered pointed tops and a floor ring to stop them splaying.
Decking board bundle (Hardware Store and DIY Warehouse)
A bundle of grooved decking boards: sixteen 2.4 m boards in four courses with visible ribbed faces, strapped over two bearers with a corner protector.
Timber length bundle (Hardware Store and DIY Warehouse)
A strapped bundle of 3.0 m sawn softwood: twenty four lengths in six courses, each length offset and rotated a little so the ends stagger, banded twice.
Plaster bag half pallet (Hardware Store and DIY Warehouse)
A half pallet of plaster: three courses of two narrower sacks stacked on a 0.8 m pallet with a single strap, the size that fits an aisle end bay.
OSB and ply sheet stack (Hardware Store and DIY Warehouse)
A low stack of fourteen 2.4 m structural boards on a pair of bearers, the top three sheets pulled out of line where they have been leafed through.
Plasterboard sheet stack (Hardware Store and DIY Warehouse)
A stack of twenty two 2.4 m by 1.2 m plasterboard sheets on bearers: tapered edges, a slight fan across the stack and two protective corner angles.
Garden aggregate bag bay (Hardware Store and DIY Warehouse)
A kerbed floor bay of decorative aggregate: four small handled bags of chippings slumped inside a low timber kerb with a sloping label board at the front.
Aggregate bulk bag (Hardware Store and DIY Warehouse)
A 0.9 m woven bulk bag of gravel: a slumped body that bulges at the belly and pulls in at the top hem, with four sewn corner lifting loops standing proud.
Sharp sand bag stack (Hardware Store and DIY Warehouse)
A loose floor stack of six sharp sand bags: heavy plastic sacks that slump over each other in two staggered courses, the way an opened pallet looks by mid morning.
Compost bag pallet (Hardware Store and DIY Warehouse)
A pallet of garden compost: four courses of two plastic sacks with a fuller belly than a cement bag, cross stacked on a block pallet under a wrap skirt.
Cement bag (Hardware Store and DIY Warehouse)
A single 25 kg paper cement sack lying flat: a crowned pillow body 0.62 m long with pinched glued ends and a soft slump along its length.
Cement bag pallet (Hardware Store and DIY Warehouse)
A full pallet of 25 kg cement bags: five courses of two sagging paper sacks laid in alternating directions on a block pallet, held by a shrink wrap skirt and two banding straps.
Radiator display stand (Hardware Store and DIY Warehouse)
A 1.6 m radiator display: four panel and column radiators hung side by side on a braced steel A frame with valve stubs and a header rail.
Shower enclosure display (Hardware Store and DIY Warehouse)
A 1.0 m shower enclosure display: a stone resin tray on a raised plinth with two glazed sides, a sliding door panel, a riser rail with a handset and a fixed head arm.
Carpet roll rack (Hardware Store and DIY Warehouse)
A 3.0 m carpet roll rack: a heavy steel frame carrying six full width rolls on tube cradles at two levels, with a cutting rule along the front rail.
Wallpaper roll rack (Hardware Store and DIY Warehouse)
A 1.3 m wallpaper rack: four shelves of upright paper rolls in open pigeonhole compartments, with a sample book shelf at the base and a price rail on each tier.