3D Assets
@3dassets
Saw horse pair (Hardware Store and DIY Warehouse)
A pair of folding saw horses: pressed steel A frames with a plastic top beam, a slotted cutting groove and rubber feet, standing 0.76 m apart.
Builders wheelbarrow (Hardware Store and DIY Warehouse)
A 90 litre builders wheelbarrow: a pressed steel pan with a rolled lip, a tubular chassis with two stand legs, moulded grips and a pneumatic front wheel.
Garden hose reel cart (Hardware Store and DIY Warehouse)
A wheeled garden hose reel: a moulded drum wound with coiled hose on a tubular frame, two spoked wheels, a folding crank handle and a tap connector on the guide.
Screwdriver set on hooks (Hardware Store and DIY Warehouse)
A hanging set of six screwdrivers: bi material handles with hex bolsters and blades of four lengths, each carded and hung from a peg hook rail.
Step ladder (Hardware Store and DIY Warehouse)
A 1.6 m four tread step ladder: aluminium stiles with ribbed treads, a hinged top platform with a tool tray, a spreader brace and rubber foot caps.
Extension ladder (Hardware Store and DIY Warehouse)
A 3.0 m two section extension ladder standing closed: box section stiles, two banks of round rungs with the upper section nested in front of the lower, a rope pulley bracket and rubber feet.
Open tote tool bag (Hardware Store and DIY Warehouse)
An open tote tool bag: a soft sided fabric body that sags between its rigid base and rim, a stiff centre spine handle and a row of outer pockets holding pliers and a rule.
Boxed screw pack (Hardware Store and DIY Warehouse)
A boxed screw pack: a card carton with a folded lid flap and a clear window panel, standing on a shelf with the screws visible behind the window.
AnimatedCompartment fastener tray (Hardware Store and DIY Warehouse)
A 0.36 m compartment tray: a clear lidded organiser with ten moulded cells of bolts, washers and wall plugs, and two latch tabs on the front edge.
AnimatedCantilever tool box (Hardware Store and DIY Warehouse)
A 0.52 m cantilever tool box: a moulded body with a hinged lid on a named pivot, two cantilever trays lifted out on link arms and a folding carry handle.
Tape measure (Hardware Store and DIY Warehouse)
A 5 m tape measure: a rubber over moulded case with a belt clip, a thumb lock and a hooked blade pulled a little way out of the mouth.
Adjustable spanner (Hardware Store and DIY Warehouse)
A 250 mm adjustable spanner: a forged handle with a knurled adjuster worm, a sliding lower jaw and a fixed upper jaw, lying flat.
Spirit level (Hardware Store and DIY Warehouse)
A 1.2 m box section spirit level: an extruded aluminium body with milled hand holes, rubber end caps and three vial windows with fluid tubes.
Hand saw (Hardware Store and DIY Warehouse)
A 550 mm hand saw: a tapered toothed blade with a stiffened back, a riveted moulded pistol handle and a hang hole, lying flat.
Reciprocating saw (Hardware Store and DIY Warehouse)
A cordless reciprocating saw: an inline barrel body with a rubber grip, a pivoting shoe, a blade clamp collar, a bare blade and a slide on battery.
Claw hammer (Hardware Store and DIY Warehouse)
A 450 g claw hammer: a forged head with a domed face and a curved split claw on a shaped shaft with a moulded grip and a lanyard hole.
Angle grinder (Hardware Store and DIY Warehouse)
A 115 mm angle grinder: a barrel motor body with cooling vents, a right angle gear head, a half disc guard, a side handle and a cutting disc with a flange nut.
Sliding mitre saw (Hardware Store and DIY Warehouse)
A sliding mitre saw on its base: a rotating table with a fence and mitre scale, twin slide rails, a pivoting saw head with a blade guard, a motor barrel and a dust bag.
Random orbit sander (Hardware Store and DIY Warehouse)
A 125 mm random orbit sander: a palm grip dome body with a speed dial, a dust extraction canister on the tail and a hook and loop backing pad below.
Cordless combi drill (Hardware Store and DIY Warehouse)
A cordless combi drill: a moulded pistol body with a rubber over grip, a keyless chuck, a torque collar with detents, a gear selector and a slide on battery pack.
Circular saw (Hardware Store and DIY Warehouse)
A 190 mm circular saw: a cast shoe plate, a blade guard housing with a retracting lower guard, a top handle with a trigger, a bevel quadrant and a dust port.
Paint tin pallet block (Hardware Store and DIY Warehouse)
A promotional pallet of paint: twenty four 5 litre tins in two courses with card separators between them, wrapped on a block pallet.
Sealant tube crate (Hardware Store and DIY Warehouse)
An open crate of twenty five sealant cartridges standing on end: a stacking plastic crate with ribbed sides and a stepped rim, filled with nozzled tubes.
Paint tin, 2.5 litre (Hardware Store and DIY Warehouse)
A 2.5 litre paint tin: a rolled seam steel body with a recessed press on lid, a wire bail handle and a grip block, standing 0.28 m to the top of the handle.