3D Assets
@3dassets
Chairlift Chair 6 Seat (Ski Resort and Snow Park)
Six-seat detachable chair, 3.6 m wide, with five dividers and the same 2.7 m grip pivot.
Hotel Lobby with Check-In and Concierge (Hotel and Resort Operations)
A hotel lobby against two partition walls: a five-module check-in run turning a corner into an accessible bay, with the key card rack and the world clock set mounted on the wall behind, a self check-in pod and two queue posts in front. The concierge desk, luggage store rack...
Guest Room with En-Suite (Hotel and Resort Operations)
A complete hotel guest room on a 4.1 by 6.7 m plate, walled on the two far sides so the room reads from a viewing angle: a king bed with its upholstered headboard against the back wall between two nightstands, a luggage bench at the foot, an armchair and side table by the...
Kettlebell set (Hotel and Resort Operations)
Three cast kettlebells in ascending sizes with accent collar bands, standing on a stainless tray.
Gondola Tower (Ski Resort and Snow Park)
Twin-leg portal tower for a gondola line: two tubular legs, cross braces, a wide head beam with six-wheel sheave trains riding above the ropes, platform and ladder; rope datum 8 m.
Poolside towel station (Hotel and Resort Operations)
A 0.9 m poolside towel station: a slatted timber cabinet on a plinth with three decks of twelve rolled towels, a capping top and a used-towel bin with a lid ring.
Chairlift Tower (Ski Resort and Snow Park)
Tubular steel chairlift tower with crossarm, four-wheel sheave trains on both rope sides, maintenance platform and ladder; rope datum 8 m.
Cable Span 12 m (Ski Resort and Snow Park)
Twelve metre straight haul-rope pair at the 8 m datum, 3.2 m apart, over a 4 m wide cleared lift-line snow strip that grounds the module.
Cable Span 6 m (Ski Resort and Snow Park)
Six metre haul-rope pair on the 8 m datum for closing odd lift-line lengths, with a 4 m lift-line snow strip.
Poolside table with parasol (Hotel and Resort Operations)
A 0.72 m poolside table with a 2.2 m parasol: a weighted base, a three-strut table with an alloy top, a mast through the centre and an eight-rib canopy with a finial.
Poolside sun lounger (Hotel and Resort Operations)
A 1.95 m poolside sun lounger: an alloy frame with two transport wheels, a slatted deck and a raked slatted back on side arms, a piped mattress in two sections and a rolled head bolster.
Spa reception desk (Hotel and Resort Operations)
A 1.8 m spa reception desk: a bowed slatted timber body with a stone top and an accent lit reveal, a staff worktop behind on two posts, and a table lamp on the guest ledge.
Spa relaxation lounger (Hotel and Resort Operations)
A 1.7 m spa relaxation lounger: a curved bent-timber frame with sixteen shaped slats, a piped seat mattress, a raked back pad and a rolled head bolster.
Sauna bench module (Hotel and Resort Operations)
A 1.8 m two-tier sauna bench: slatted upper and lower decks on timber frames with a leaning slatted backrest, a step and a timber-handled ladle rest.
Spa treatment trolley (Hotel and Resort Operations)
A 0.5 m spa treatment trolley: a tube frame on four named pivoted castors with three lipped decks, a stainless bowl, three product bottles and a folded towel.
Massage table (Hotel and Resort Operations)
A 0.74 by 1.9 m massage table: a piped upholstered top on a boxed timber frame with a lower linen shelf, an adjustable face cradle on two arms, a rolled bolster and a folded towel.
Gym water station (Hotel and Resort Operations)
A 1.1 m gym water station: a stainless chilled cabinet with a recessed bottle-filler bay, a swan-neck spout, a slotted drip grille, a status panel and a side rack of four cups.
Exercise mat rack (Hotel and Resort Operations)
A 0.9 m exercise mat rack: a welded upright frame with a mid shelf carrying five rolled mats, a lower deck with three foam blocks and a top rail.
Adjustable weight bench (Hotel and Resort Operations)
An adjustable weight bench: a spine beam on two cross feet with levelling glides, a piped seat pad and a raked piped back pad, and two upright bar posts with J hooks and a ladder of pin holes.
Two-tier dumbbell rack (Hotel and Resort Operations)
A 1.5 m two-tier dumbbell rack: raked A-frame ends with base rails and glides, two cradle shelves with retaining lips, and ten hex dumbbells in five ascending pairs.
Cable weight station (Hotel and Resort Operations)
A 1.1 by 1.2 m cable weight station: a welded frame on base beams and stabiliser feet, a shrouded twelve-plate stack on two guide rods with a selector pin, three guarded pulleys, a lat bar on the high cable, a stirrup on the low cable, and a piped seat.
Cross trainer (Hotel and Resort Operations)
A cross trainer: front and rear stabilisers, a vented flywheel cowl, a mast, two long ramps with textured foot plates on rear rollers, two swing arms with moving handgrips, fixed centre grips and a raked console.
Upright exercise bike (Hotel and Resort Operations)
An upright exercise bike: two levelling stabiliser bars, a spine frame, a vented flywheel cowl with a crank and two strapped pedals, an adjustable seat post with a piped saddle, a handlebar post with swept bars and grips, and a raked console with a bottle cage.
Rowing machine (Hotel and Resort Operations)
A 1.9 m rowing machine: a monorail on a rear foot and a front pedestal, a fan flywheel in a caged cowl with grilles, two raked foot stretchers with straps, a rolling seat carriage with a piped pad, a chain-drawn handle with grips and a raked performance monitor.