3D Assets
@3dassets
Firing Room Console Bay (Rocket Launch Pad and Gantry)
The two indoor models of the pack laid out as they are installed: three firing room consoles in a shallow arc facing the pad, seven ground support electronics racks lining the back and side walls, a tray run bringing the cabling in, a safety shower and a blank notice board....
Launch Complex Pad and Yard (Rocket Launch Pad and Gantry)
A working launch complex laid out on its own ground, 96 by 80 m. The apron fills the centre with the flame trench sunk down its centre line and the deflector under the launch mount, a vehicle standing on the mount in four stacked sections with the closed fairing on top, and...
Access Road Module (Rocket Launch Pad and Gantry)
An 8 m access road module: a gravel shoulder each side of a 6.4 m dark carriageway with a dashed centre line and concrete kerbs. Ported on all four edges so a road runs across the site on the same grid.
Burnt Scrub Ground Tile (Rocket Launch Pad and Gantry)
The gravel ground module in burnt dark ground with pale scree patches, for the scorched land downrange of the pad. Same 8 m module and the same four edge ports.
Gravel Ground Tile (Rocket Launch Pad and Gantry)
An 8 m gravel ground module for the ground between the pad structures, with scattered stones on the surface. Ported on all four edges to the same grid as the apron and hardstand modules.
Warning Sign Board (Rocket Launch Pad and Gantry)
A 2.7 m roadside warning board on two posts and ballast pads: a large blank yellow face and a blank white panel below it, with a red marker block on the frame. Deliberately unlettered so a developer can put their own text on it.
Debris Catch Net Frame (Rocket Launch Pad and Gantry)
A 9 m debris catch net: two braced posts on ballast pads carrying a top and mid rail with a corded net across them. The net is modelled solid and static, because a net needs a deformable mesh.
AnimatedPad Fire Truck (Rocket Launch Pad and Gantry)
An 8 m pad fire truck body: a red cab and locker body with roll up locker faces, a roof water tank and monitor, warning beacons, a cab door that opens and four wheels that roll. No service, brigade or maker mark anywhere.
AnimatedCrew Transfer Van (Rocket Launch Pad and Gantry)
A 6.4 m crew transfer van body: a raised white cabin on a chassis with a roof rack and plant box, blank glazed windows, side steps, a door that opens and four wheels that roll. No livery, badge or operator mark anywhere.
AnimatedSite Office Cabin (Rocket Launch Pad and Gantry)
A 9 m portable site office: a ribbed cabin on a skid chassis with a steel roof, six windows, an entrance door on a railed landing, a roof plant box and a blank notice board beside the door.
AnimatedGround Support Electronics Rack (Rocket Launch Pad and Gantry)
A 2.3 m ground support electronics rack: a floor standing cabinet with seven instrument panels, indicator caps and blank readout strips, a hinged front door and castors at the base.
Firing Room Console (Rocket Launch Pad and Gantry)
A 3.2 m firing room console: a desk on two pedestals with a raked control panel, three keypad blocks with indicator caps and three blank screens on a back rail. Every screen and panel face is deliberately blank.
AnimatedPerimeter Gate (Rocket Launch Pad and Gantry)
An 8 m two leaf vehicle gate between two posts on ballast pads, with a mesh infill, a blank sign plate on each leaf and a card reader pedestal. Both leaves swing open on their own nodes.
Perimeter Fence Panel (Rocket Launch Pad and Gantry)
A 4 m security fence panel, 3 m to the top strand: mesh on two rails between posts on ballast pads, with raked arms carrying three strands. Ported left and right so a perimeter is built from repeats.
Windsock Mast (Rocket Launch Pad and Gantry)
A 7.5 m windsock mast on a concrete footing: a braced column, a swivel ring and a banded red and white sock streaming to one side, with a small light box below the head.
AnimatedPad Camera Tower (Rocket Launch Pad and Gantry)
A 11.7 m pad camera tower: a lattice mast on a footing with a railed platform, a ladder, a signal cabinet and a tracking camera on a pan head that sweeps across the pad and back.
Floodlight Mast (Rocket Launch Pad and Gantry)
A 12.7 m floodlight mast: a braced tapered column on a concrete footing carrying a head frame of four aimed floodlights, with a control box at the foot and a marker light up the column.
Lightning Arrestor (Rocket Launch Pad and Gantry)
A 7.9 m lightning arrestor for a tank farm or a cart park: a braced steel pole on a concrete footing with insulator rings, an air terminal, an earth box and a downlead to a ground rod, plus a blank warning plate.
AnimatedGround Power Unit (Rocket Launch Pad and Gantry)
A 3.6 m skid mounted ground power unit in safety yellow: a louvred generator enclosure with an exhaust stack, a lifting frame, a control panel with a blank display and a cabinet door that opens.
AnimatedNitrogen Purge Cart (Rocket Launch Pad and Gantry)
A four wheel gaseous nitrogen purge cart, 2.6 m long: four bottles in a cabinet frame, a regulator panel with a blank gauge face, two outlet risers on the top deck and a tow handle. All four wheels roll.
Helium Bottle Rack (Rocket Launch Pad and Gantry)
A twelve bottle high pressure gas rack in a lifting frame, 3.4 m wide: two rows of bottles with valve heads, a collector manifold across the top of each row and a blank hazard plate on the front.
Chilldown Skid (Rocket Launch Pad and Gantry)
A 4.4 m cryogenic chilldown skid on a lifting frame: a heat exchanger cabinet, a vacuum jacketed vessel, three transfer lines with isolation risers, a control box with a blank display and a lifting bar.
Flare Stack (Rocket Launch Pad and Gantry)
An 18.5 m flare stack for burning off vented propellant: a lattice mast carrying the flare riser and its tip, ignition boxes at the head, a knockout drum and feed line at the foot, a ladder and a blank hazard plate. No flame is modelled.
Propellant Cylinder Tank (Rocket Launch Pad and Gantry)
An 11 m insulated horizontal propellant tank on two concrete saddles: a 3.5 m barrel with dished ends and external stiffening rings, a valve manifold on top, a fill line and standpipe, an access ladder and a blank data plate.