3D Assets
@3dassets
Stepped stone plinth wall, 3 m (Botanical Glasshouse and Palm House)
Three metre stepped limestone plinth 0.9 m high, an oversailing base course, a set back die and a weathered cap, ported on both ends so a run of any length carries the glasshouse bay frames.
Balloon Launch Field on a Festival Morning (Hot Air Balloon Festival)
An 88 x 80 m festival launch field an hour before a mass ascent, tiled from the pack's own grass, mown lane and farm track modules and closed by a hedgerow with a five bar gate in it. Two balloons stand fully inflated over their baskets on the mown lanes with the burner...
PA Speaker on a Stand (Hot Air Balloon Festival)
A public address speaker on a tripod stand, 2 m tall, with a plain grille, a horn and a cable, for launch announcements across a field.
Blank Finger Post (Hot Air Balloon Festival)
A 2.3 m direction finger post with three blank arms in three colours, for signing the way to a launch field, a car park or a catering line.
Bunded Fuel Bay (Hot Air Balloon Festival)
A 3 m bunded fuelling bay: a kerbed steel spill tray with four propane cylinders standing in it, two blank warning boards on posts and a chain across the front.
Event Traffic Cone (Hot Air Balloon Festival)
A 0.77 m traffic cone with a square base and a single reflective band, for marking a launch lane or a vehicle route across a field.
Fire Extinguisher Stand (Hot Air Balloon Festival)
A twin fire extinguisher stand for a fuelling point: two red cylinders with brass valves and hoses in a steel cradle, under a blank sign plate.
Event Floodlight Mast (Hot Air Balloon Festival)
A 4.6 m floodlight mast on a ballasted tripod base, with a cross head carrying four angled lamp heads, for a dawn briefing or an evening night glow.
AnimatedEvent Generator Set (Hot Air Balloon Festival)
A skid mounted silenced generator with a lifting canopy lid on its own node, a blank control panel, louvred vents, an exhaust stack and a cable reel on the side.
First Aid Point (Hot Air Balloon Festival)
A 2.4 m first aid shelter for an event field: a framed canopy with a back panel, a folding stretcher trolley, a supplies case and a blank sign board. No emblem is used on it.
AnimatedPortable Toilet Block (Hot Air Balloon Festival)
A two cubicle portable toilet block, 2.3 m wide, with moulded panels, a translucent roof cap, vent slots and two doors on their own hinge nodes.
AnimatedWheeled Bin Cluster (Hot Air Balloon Festival)
Three wheeled event bins in a row in three colours, each with a hinged lid on its own node, a blank front label panel and a pair of castors.
Event Flag Pole (Hot Air Balloon Festival)
A 6.2 m event flag pole on a weighted base, flying one plain rectangular flag with an invented abstract block on it and a halyard down the mast. It is not a national flag.
Bunting Run (Hot Air Balloon Festival)
A 4 m bay of bunting on two timber poles: two sagging lines of plain rectangular pennants in four colours, no marks on any of them, ported nose to tail to run a boundary.
AnimatedCatering Van Body (Hot Air Balloon Festival)
A 5 m box bodied catering van with a blank serving hatch surround and a hatch that lifts out as an awning, a counter shelf, a roof vent, a cab and four road wheels. No lettering anywhere on it.
Folding Camp Chair, Red (Hot Air Balloon Festival)
The folding camp chair in the second fabric colour, for mixing a crowd line up. Geometry unchanged.
Folding Camp Chair (Hot Air Balloon Festival)
A folding fabric camp chair with a tube frame and a slung seat and back, the chair a retrieve crew carries in the boot and a spectator sits on to watch a mass ascent.
Folding Trestle Table (Hot Air Balloon Festival)
A 1.8 m folding trestle table with a plain top, edge banding, splayed tube legs and a stretcher, the table every registration desk and catering point on a field is built on.
Registration Gazebo (Hot Air Balloon Festival)
A 3 m pop up gazebo for launch registration: a steel leg frame with a pyramid canopy, a blank valance on all four sides and one side panel down. The frame is modelled up; it does not fold.
Rope and Stake Perimeter (Hot Air Balloon Festival)
A 3 m bay of rope and stake perimeter: two timber stakes with two sagging ropes and a pair of blank marker tabs, ported nose to tail to fence off a launch area.
Crowd Barrier Run (Hot Air Balloon Festival)
A 2.4 m steel crowd barrier with nine verticals, top and bottom rails, splayed feet and hook ends, ported nose to tail to run a spectator line along a launch field.
Balloon Tether Anchor Point (Hot Air Balloon Festival)
A ground anchor for a tethered balloon: a steel plate pinned by four stakes, with a shackle, a lifting eye and a webbing strop running off it.
Pilot Briefing Board (Hot Air Balloon Festival)
An A frame briefing board for a launch field: two blank faces in timber frames on splayed legs, with a shelf across the middle. Nothing is written on it.
Launch Pitch Marker Post (Hot Air Balloon Festival)
A 1.4 m launch pitch marker post: a banded post on a weighted foot with a blank plate at the top for a crew to chalk a slot number on.