3D Assets
@3dassets
AnimatedHorse Spring Rocker (City Park and Playground)
A single seat spring rocker: a red horse body with an upright head, ears, a grab bar and two foot rests, on a coiled spring and a cast ground plate. The body is one node above the spring, so the clip rocks it about the spring head.
AnimatedDuck Spring Rocker (City Park and Playground)
The same spring and plate carrying a yellow duck body with a flat bill and a stub tail, for a second animal on the same play area. The spring coil is modelled solid and does not deform; the rocking is the body node above it.
Monkey Bars (City Park and Playground)
A 3.6 m overhead ladder at 2.1 m on two raked red A-frames with ten steel rungs and a brace across each frame. Static.
AnimatedTwo Seat Seesaw (City Park and Playground)
A 3.2 m yellow seesaw beam on a cast pedestal at 0.62 m, with a red moulded seat, a grab bar and a foot rest at each end. The beam is one node on the axle, so the clip tips it about the real pivot.
Steel Climbing Frame (City Park and Playground)
A 2.4 x 2.4 x 2 m painted climbing cube: four corner posts, a rung ladder up each end face, a yellow half deck and six drop bars to it, on a rubber pad. Static frame.
AnimatedTwo Bay Swing Set (City Park and Playground)
A 3.6 m two bay swing frame on 2.4 m painted A-frame legs with a yellow top bar, two rubber sling seats on rigid hanger rods and a brace between each pair of legs. Each seat is one node hung on the bar's own axis, so the clip swings from the bar and not from the seat.
AnimatedTwo Bay Swing Set with Toddler Seats (City Park and Playground)
The same two bay frame fitted with high backed toddler bucket seats hung a little shorter, for the under fives end of a play area. The hanger rods are modelled solid and swing with the seat as one part; a real chain needs a joint per link.
Playground Slide (City Park and Playground)
A 1.4 m high timber slide tower with blue guard panels, a four rung ladder up the back and a 2.8 m stainless chute with yellow side rails and a flat run out. Static: no part of a slide moves.
Club Courts and Terrace (Tennis Club and Courts)
A working tennis club built from the kit: a full doubles court of blue surface tiles inside a green surround, with the painted line set over them, the net up between its posts and singles sticks in place. Court fencing rings it, windbreak screens along the back run and a gate...
Coach Whiteboard (Tennis Club and Courts)
A 1.45 m coaching whiteboard on an A frame: a white board with a blue court diagram, the lines of a full court drawn on it and a pen tray under the face.
AnimatedCourt Roller (Tennis Club and Courts)
A 0.94 m hand court roller: a heavy steel drum in a charcoal yoke with a scraper bar over it and a raked handle, for dressing a clay court after play.
AnimatedLine Marking Trolley (Tennis Club and Courts)
A 0.72 m line marking trolley: a paint tank on two wheels with a blue lid, a marking shoe under the nose and a raked push handle, for repainting a court line.
AnimatedNet Winder (Tennis Club and Courts)
A 0.75 m net winder: a steel cord drum with a crank between two charcoal cheeks on a foot plate, the reel a net cord is tensioned from at the post.
Terrace Chair (Tennis Club and Courts)
A 1.1 m terrace chair: a timber seat and a slatted, slightly raked back on a charcoal steel frame, to stand round the terrace table.
Court Litter Bin (Tennis Club and Courts)
A 1.04 m court side litter bin: a charcoal drum with two steel bands, a hooded top and a yellow label panel, for a gate side or a terrace corner.
Terrace Planter (Tennis Club and Courts)
A 0.94 m square timber planter with a clipped green shrub in it, for a terrace edge, a gate side or the front of a clubhouse.
Terrace Parasol (Tennis Club and Courts)
A 2.7 m terrace parasol: a 2.6 m blue and white segmented canopy on a steel pole in a weighted base, for a table on the clubhouse terrace.
Terrace Table (Tennis Club and Courts)
A 0.92 m round terrace table 0.79 m high: a timber top on a charcoal pedestal and a weighted foot, for the deck outside a clubhouse.
Clubhouse Roof Slope (Tennis Club and Courts)
One 4 m bay of clubhouse roof: a charcoal slab that seats on the wall head at its eave edge and climbs 1.8 m over a 3 m run to the ridge, with standing seams picked out along it.
Clubhouse Ridge Cap (Tennis Club and Courts)
A 4 m ridge cap in clay red, 0.6 m across and cut to the roof pitch, so it closes the joint where two slopes meet without reading as a slope of its own.
Clubhouse Gable End (Tennis Club and Courts)
The 6 m gable end that closes a clubhouse run: a rendered wall to the head, the gable above it cut to the roof pitch and a square window under the apex.
AnimatedClubhouse Door Bay (Tennis Club and Courts)
A 4 m clubhouse entrance bay on the same module as the wall bay: piers and a lintel round a 1.8 m opening, a timber threshold and a glazed door that swings open.
Spectator Bleacher (Tennis Club and Courts)
A 4.2 m three row spectator bleacher: timber benches and backs on a raked steel frame with side rails, for the surround beside a show court.
Clubhouse Window Bay (Tennis Club and Courts)
The 4 m clubhouse bay with a wide glazed window in a timber frame, for the lounge side that looks out over the courts.