Walkable demo
Corner laundromat
Step into a 14 by 10 metre laundrette built from the Laundromat and Cleaning Services pack: a bank of washers and dryers with payment columns, a folding island, laundry carts, waiting benches behind a glazed shopfront, and vending.
About
One laundrette from 23 of the pack's 94 models, in the room preset with cool light and lamps under a 3.2 m ceiling.
You come in through the door bay in the glazed shopfront. The machine bank runs along the back wall: four 700 washers on plinths, two 900 washers, three stacked dryer pairs and four 800 dryers between end panels, with coin and card payment columns and two stacked washer-dryers on the east wall. The folding island table stands in the middle with a wall shelf, two rolling carts, a hamper and a wet floor sign; two waiting benches, a chair run, a magazine rack and the notice board sit by the windows, with the detergent and drinks vending machines on the east.
This pack ships animation clips: every washer and dryer door, the stacked units and the vending machines play as you come within three metres and rewind when you leave.
Every piece here is a published model from the pack, placed by hand. Walk with the keys or touch, and approach a piece to see it move if it has animation. Colliders, navigation and gameplay are yours to add.
Points of interest
Washers
Four 700 front-load washers on plinths and two 900 washers along the back wall, with an end panel closing the bank and the coin payment column beside it. Every door here has a clip and opens as you approach.
Commercial front load washer 700 (Laundromat and Cleaning Services)Dryers
Three stacked tumble dryer pairs and four 800 dryers finish the bank, with the card payment column and two stacked washer-dryers on the east wall.
Commercial tumble dryer 800 (Laundromat and Cleaning Services)Folding island
The 1.8 m folding island table in the middle, a wall folding shelf, two rolling laundry carts and a wheeled hamper.
Folding island table 1.8 m (Laundromat and Cleaning Services)Waiting
Two waiting benches and a three-seat chair run by the shopfront, a magazine rack and the notice board. The shopfront is eight glazed bays and a door bay.
Waiting bench 1.6 m (Laundromat and Cleaning Services)Vending
The detergent vending unit and the drinks vending machine on the east wall; both have clips.
Detergent vending unit (Laundromat and Cleaning Services)
Use with an AI agent
Copy this prompt into your AI chat to rebuild the layout, then describe what to change.
Rebuild the "Corner laundromat" demo scene from the Laundromat and Cleaning Services pack in my project. Layout (JSON, every placement with its CDN URL): https://3dassets.dev/api/v1/demos/laundrette-and-cleaning Pack manifest: https://3dassets.dev/api/v1/packs/laundrette-and-cleaning Demo page: https://3dassets.dev/demos/laundrette-and-cleaning - 46 placements of 23 models; units are metres, +Y up, rotation is yaw in degrees about +Y - Spawn at (0, 0, 3.8) facing 180 degrees; eye height 1.6 m - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader, one load per distinct model, cloned per placement; no decoders required
Also available as JSON or Markdown, and via the MCP server.
Common questions
How do I use Corner laundromat with my AI development tools?
How do I get started?
Which game engines and tools can I use Corner laundromat with?
How do I import this scene into Unity, Godot, Unreal or Blender?
Can I use Corner laundromat in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Is the demo itself a file I can download?
Can I change the scene, or add gameplay to it?
Models in this demo
AnimatedShopfront bay, door (Laundromat and Cleaning Services)
The 1.2 m shopfront bay fitted as an entrance: a glazed stile and rail door on a named hinge pivot with a full height pull and a kick plate, an overpanel light and the same fascia band above.
Shopfront bay, glazed (Laundromat and Cleaning Services)
A 1.2 m glazed shopfront bay on the shopfront run grid: a kick plinth, boxed mullions, a full height glazed light with a transom rail and a fascia band with a blank sign panel under a projecting cap.
Commercial washer plinth 700 (Laundromat and Cleaning Services)
A standalone 700 mm welded stainless machine plinth: a folded box frame on four heavy levelling feet with a front aperture, a wire storage basket inside and a bolted top deck for the machine above.
AnimatedCommercial front load washer 700 (Laundromat and Cleaning Services)
A 700 mm commercial front load washer extractor on a welded stainless plinth: 420 mm porthole with barrel hinges and a cast locking handle, sloped keypad fascia, three cell soap hopper and a bolted pump access panel.
AnimatedCommercial front load washer 900 (Laundromat and Cleaning Services)
A 900 mm high capacity commercial washer extractor: 540 mm porthole, five cell soap hopper, a supply manifold with isolation valves across the top rear and a 240 mm welded plinth over a gravity drain.
AnimatedStacked commercial tumble dryer pair 800 (Laundromat and Cleaning Services)
An 800 mm stacked commercial dryer pair: two pockets in one welded frame with a central block carrying both keypad fascias, a lint drawer for each pocket, flank intakes and two rear exhaust spigots.
AnimatedCommercial tumble dryer 800 (Laundromat and Cleaning Services)
An 800 mm single pocket commercial tumble dryer: 560 mm louvred door on barrel hinges, a full width lint drawer on its slide axis, flank air intake grilles and a rear exhaust spigot on a stainless plinth.
Machine bank end panel (Laundromat and Cleaning Services)
The folded stainless end panel that closes a machine bank: a flat blade with front and rear returns, a capping rail, a set back kick, two levelling feet and a bolt line down the visible face.
AnimatedStacked commercial washer and dryer 700 (Laundromat and Cleaning Services)
A 700 mm stacked commercial pair in one welded frame: washer below and dryer above with separate portholes, a shared stainless control band between them, corner stiles binding the stack and a lint drawer under the upper door.
Folding island table 1.8 m (Laundromat and Cleaning Services)
A 1.8 m double sided folding island: a postformed laminate top on a welded stainless frame with levelling feet, a wire undershelf, a moulded linen bin under each end and a hooked bag rail down the working flank.
Wall folding shelf 1.5 m (Laundromat and Cleaning Services)
A 1.5 m wall mounted folding shelf on folded gallows brackets with tie rods, a postformed laminate top at 900 mm, a hanging rail on drop brackets above it and a capping shelf over the rail.
Waiting bench 1.6 m (Laundromat and Cleaning Services)
A 1.6 m laundrette waiting bench: a pressed perforated seat pan with a rolled front lip and a raked perforated back on a welded steel beam frame with base plates and a stretcher tube.
Waiting chair run, three seat (Laundromat and Cleaning Services)
A three seat beam chair run on a cantilever frame with sled feet: crowned and piped seat cushions, upright piped back pads on raked steel carriers and four tubular armrests with soft top pads.
Magazine rack (Laundromat and Cleaning Services)
A floor standing magazine rack: four sloping shelves with retaining lips on a bent tube frame with base plates, stocked with blank magazines and leaflets and topped by a header panel.
AnimatedDetergent vending unit (Laundromat and Cleaning Services)
A 620 mm glazed detergent vending unit: four product shelves of sachets behind a framed window, a two column selection keypad, a coin mechanism with a return cup, a locked cash door and a hinged delivery flap.
AnimatedDrinks vending machine (Laundromat and Cleaning Services)
A glass front drinks vender on a welded plinth: four product shelves of bottles behind a framed window, a selection keypad column with a graphic screen, a coin mechanism with a return cup, a card reader and a hinged delivery flap.
Coin payment column (Laundromat and Cleaning Services)
A 300 mm stainless payment column for a machine bank: coin slot escutcheon, mechanical counter window, coin return cup, cycle selection buttons, a price card frame and a locked cash box door on a welded plinth.
Card payment column (Laundromat and Cleaning Services)
The payment column fitted with a contactless card head instead of the coin mechanism: an angled reader pad with a target ring, a graphic screen above it and a receipt slot, on the same 300 mm column and plinth.
Rolling laundry cart (Laundromat and Cleaning Services)
A canvas laundry truck: a welded tube frame on four swivel castors with a rolled top rim, a slung canvas liner sagging to the deck, a folded linen load and a tubular push handle.
AnimatedWheeled laundry hamper (Laundromat and Cleaning Services)
A moulded wheeled hamper on four swivel castors: a tapered tub with a rolled rim and side grips, a mesh liner basket and a hinged lid on a named pivot at the back edge.
Wet floor sign (Laundromat and Cleaning Services)
An A frame wet floor sign: two moulded blades hinged at the top with blank warning panels, folded foot rails and a carry handle on the hinge tube.
Wall clock (Laundromat and Cleaning Services)
A 340 mm wall clock: a chamfered bezel ring with a stepped rebate, a blank dial with pressed hour and minute marks, three hands on a centre boss and a rebated lens ring.
Framed notice board (Laundromat and Cleaning Services)
A 900 mm framed notice board: a felt lined backing panel with four blank notices held by push pins, a chamfered aluminium surround with a lower pen rail and a carcass panel for wall fixing.