Free models · CC0
Interior
Every realistic model below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
2,317 free GLB models
Observation gantry (UFO Crash Site and Recovery Facility)
A 7 m elevated observation walkway at 3.4 m: six columns on pads with knee braces, a grated deck, handrails with toe boards on both sides and the end, a nine-tread stair flight with its own rails and a deck light.
Overhead crane rail (UFO Crash Site and Recovery Facility)
A 12.4 m span overhead travelling crane 7.2 m to the walkway: four columns on pads with knee braces, two runway beams, a twin girder bridge on end carriages, a trolley node and a hook block node hanging on its ropes, plus a wall pendant station.
Decontamination arch (UFO Crash Site and Recovery Facility)
A 3 m walk-through decontamination arch: an arched shell of real thickness, twenty one spray nozzles on three rings and two side rails, two lamp strips, a grated floor between yellow kerbs and a control box.
Sample rack wall (UFO Crash Site and Recovery Facility)
A 2.4 by 2.3 m sample rack: six shelf levels carrying twenty four trays of capped vials, blank shelf labels and a closed top plate.
Analysis bench (UFO Crash Site and Recovery Facility)
A 2.8 m laboratory bench: a cupboard base with three drawer lines, a fume hood with a glass sash and extract duct over the left half, a reagent shelf, an instrument case, a microscope, four capped sample vials and two stools.
Control console bank (UFO Crash Site and Recovery Facility)
A five-position curved console bank on a 3.6 m radius: raked instrument panels with lit faces, upright screens, keyboard shelves, a cable tray under the desks and two five-star operator chairs.
Cryogenic pod (UFO Crash Site and Recovery Facility)
A 2.6 m cryogenic pod on a steel cradle at 9 degrees head-up: a rounded outer shell, a frosted lid on a hinged node, a foot-end compressor with coiled lines and two lit control panels.
Examination table (UFO Crash Site and Recovery Facility)
A 2.3 m stainless examination table on a pedestal column and ram: a dished top with side rails, a centre drain channel running to a floor sump, an articulated two-link overhead lamp on its own floor post and a three-shelf instrument trolley on castors.
Specimen tank, empty (UFO Crash Site and Recovery Facility)
A 3 m containment tank standing empty: a machined plinth, a double glass cylinder over a lit fluid column, a bolted cap, three service pipes with valve blocks and a status panel.
Specimen tank with suspended mass (UFO Crash Site and Recovery Facility)
The same tank with an abstract dark mass suspended in the column. The mass is a smooth non-representational form, not an organism.
Containment cell (UFO Crash Site and Recovery Facility)
A 4.4 by 4 m sealed cell: steel walls with external ribs, roof plant and service risers, a 2.5 m viewing window in pressure frames, a hinged sealed door with a vision port, a grated floor, a ceiling light panel and a lit central plinth. Interior surfaces are modelled.
Twin leaf blast door (UFO Crash Site and Recovery Facility)
A 6.4 by 5 m twin leaf sliding blast door in a concrete portal: ribbed steel leaves on floor tracks and a head beam, two drive units, chevron edge markings, a warning beacon and a control box. Each leaf is a separate node.
Site tool chest (Cold War Missile Silo and Command Bunker)
A steel tool chest: a lift lid with corner protectors, side ring handles, a hasp and a lock cylinder, three front drawers with pull handles and a lift-out tray holding a spanner and a coiled lead.
Folding crew cot (Cold War Missile Silo and Command Bunker)
A folding cot: X-frame end legs with rubber feet and cross tubes, side rails, a stretched canvas bed with reinforcing tapes, a folded blanket, a pillow and a kit bag stowed underneath.
Fire extinguisher on a bracket (Cold War Missile Silo and Command Bunker)
A period extinguisher in a wall bracket: a rolled cylinder with a domed base and shoulder, two band seams, a blank instruction panel, a valve head with a squeeze lever, a safety pin, a pressure gauge and a hose with a discharge horn.
Clipboard with log sheets (Cold War Missile Silo and Command Bunker)
A clipboard resting flat: a hardboard back, a sheaf of ruled sheets, a sprung clip with its lever, and a pencil in a side loop. Sheets are blank, with rules only.
Wall klaxon (Cold War Missile Silo and Command Bunker)
An electric klaxon on a wall bracket: a back box with a finned motor body, a flared horn bell with a rolled rim, a conduit gland and a hazard band on the bracket.
Wall map board with abstract markings (Cold War Missile Silo and Command Bunker)
A framed wall board on brackets: a grid of reference lines, three plotted routes in different colours, four ringed marker pins, a block of five sector tabs, a fold-back cover panel and a grease pencil on a cord. Abstract markings only, no lettering, place names or emblems.
Ration tin stack (Cold War Missile Silo and Command Bunker)
Seven ration tins on crate boards: four in a lower course, two stacked above, one opened with its lid folded back, plus plain paper bands and a small opener.
Gas mask with haversack (Cold War Missile Silo and Command Bunker)
A period respirator laid on its haversack: a moulded face piece with two round eyepieces and a chin outlet, a head harness, a corrugated hose and a ribbed filter canister.
Dosimeter charger and pens (Cold War Missile Silo and Command Bunker)
A radiation dosimetry set: a charger with a socket well, a round meter face and a rotary knob, three pen dosimeters with pocket clips, and a pocket survey meter with a probe on a lead.
Filing cabinet with a drawer out (Cold War Missile Silo and Command Bunker)
The same four-drawer cabinet with the second drawer run out on its slides, showing the drawer sides, base and a row of seven upright folders.
Four-drawer filing cabinet (Cold War Missile Silo and Command Bunker)
A four-drawer steel filing cabinet: a plinth, drawer fronts with pull handles and blank label frames, a full-height bar lock with a cylinder and a top label frame.
Teleprinter on a stand (Cold War Missile Silo and Command Bunker)
A page teleprinter on a tubular stand: a cast base with a sloped 44-key board, a platen and paper roll, a type basket, a clear hinged cover, a paper shelf, a line unit on the lower shelf and a trailing lead.