Free models · Game-ready GLB
Modern
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
13,443 free GLB models
AnimatedShoulder Camera on a Tripod (TV Studio and Broadcast Gallery)
A shoulder camera on a two stage alloy tripod with a spreader and rubber feet: a pan and tilt head at 1.31 m carrying a camera with a 340 mm lens, a viewfinder, a tally lamp, a shoulder pad and a side handle. The head pans on the tripod bowl.
AnimatedPedestal Camera on a Dolly (TV Studio and Broadcast Gallery)
A studio pedestal camera: a three wheel dolly with a steering ring, a two stage pneumatic column, a pan and tilt head and a broadcast camera with a stepped zoom lens, a viewfinder, a red tally lamp and two pan bars. The lens sits at 1.37 m at rest and looks toward +Z.
Mark Spikes and Gaffer Tape (TV Studio and Broadcast Gallery)
A floor dressing group: two rolls of amber camera tape stood on end, a roll of white tape on its side, a taped presenter mark and a spike line on the floor, and a marker pen. The tape is 96 mm across and sits a couple of millimetres proud of the deck.
Studio Floor Monitor (TV Studio and Broadcast Gallery)
A 720 mm studio floor monitor on a raked wedge base: a bezelled panel tipped back 16 degrees so a presenter reads it from standing height, on a weighted foot with an amber trim band and rubber pads.
Scenery Brace and Stage Weight (TV Studio and Broadcast Gallery)
A telescopic scenery brace on a 400 mm cast stage weight: a slotted iron plate with a carrying handle and an amber edge band, and an alloy brace raking up 1.35 m with its clutch collar and the shoe that screws to the back of a flat. This is what holds a set flat upright.
Riser Platform (TV Studio and Broadcast Gallery)
A 2 by 1.2 m riser deck at 300 mm: a grey topped platform on folding alloy legs with raking braces, a teal skirt along the camera side and an amber grab rail at the back. Two of them side by side carry a news desk set.
Weather Presentation Screen (TV Studio and Broadcast Gallery)
A 2.1 by 1.3 m presentation display on a braced floor stand: a bezelled panel with an abstract lit face and a status strip, raked legs on a cross foot with rubber pads and a cable tidy down one leg. The screen centre sits at 1.2 m, which is where a presenter stands beside it.
Chat Show Sofa (TV Studio and Broadcast Gallery)
A two seat chat show sofa, 2 m wide: a timber framed body on alloy feet with a crowned seat cushion, a raked back pad and padded arms, in teal upholstery. It sits 420 mm to the seat and 1.0 m to the top of the back.
Interview Chair (TV Studio and Broadcast Gallery)
A single interview chair on the same timber frame and alloy feet as the sofa, 680 mm wide with a crowned seat, a raked back pad and padded arms. Two of them and the sofa make the usual chat show triangle.
News Desk with a Monitor Inset (TV Studio and Broadcast Gallery)
A 2.6 m news desk with a bowed front: a dark body, a blue lit front panel behind an alloy toe rail, a timber top, a monitor let into it on the reading side, two desk microphones and a stack of scripts. It stands 760 mm high.
Green Screen Flat (TV Studio and Broadcast Gallery)
The same 1.2 by 2.7 m flat skinned in chroma key green, for a virtual set wall. A run of them gives a seamless green wall at the pack's own flat grid.
Set Flat (TV Studio and Broadcast Gallery)
A 1.2 by 2.7 m timber framed set flat: a studded frame open at the back the way a real flat is, a painted skin on its face and a cream dado rail and skirting. Its flat-left and flat-right ports at half height butt flat to flat, so a run of them builds a set wall.
AnimatedSet Flat with a Doorway (TV Studio and Broadcast Gallery)
The same 1.2 by 2.7 m set flat with a 780 by 2100 mm doorway in it: a lined opening and a leaf on three hinges with a lever handle and an inset panel. It carries the same flat-left and flat-right ports.
Cyclorama Corner Section (TV Studio and Broadcast Gallery)
A quarter turn cyclorama corner on a 1.2 m radius, 4 m tall, with the same 600 mm cove carried round the turn so floor, wall and corner meet in one surface. Its cyc-a and cyc-b ports sit on the two tangents, 1.2 m from the turn centre.
Studio Floor Tile, Marked Up (TV Studio and Broadcast Gallery)
The same 2 m floor tile with the floor marked up for a shoot: a taped cross on a presenter position, a long camera tape line and three white mark spikes for a second position. The tape is a millimetre proud of the deck.
Studio Floor Tile (TV Studio and Broadcast Gallery)
A 2 m square studio floor tile, 40 mm thick: a grey painted deck on a steel sub-frame with a recessed alloy cable trap lid in one corner. Ports at the four edge midpoints tile a studio floor of any size in both directions.
Cyclorama Straight Section (TV Studio and Broadcast Gallery)
A 2.4 m straight cyclorama bay 4 m tall: a blue painted shell with a 600 mm coved base running the wall into the floor, a steel back frame with raking stays and an alloy toe rail. Its cyc-left and cyc-right ports butt bay to bay.
Clothing shop floor with rails, fitting rooms and a homeware corner (Clothing Rail and Wardrobe)
A small clothes shop laid out as one place on the pack own board floor: a run of three coupled straight rails down the middle hung with shirts, a blouse, a jacket, jumpers, a hoodie, two dresses, a covered suit and trousers, with two empty hangers at the end of the run. A...
Size cube set (Clothing Rail and Wardrobe)
Five oak size cubes turned at slightly different angles on an oak tray, each with a blank card face front and back, the markers a folded stock bay is sized with. No letters or numbers are modelled.
Shop floor tile (Clothing Rail and Wardrobe)
A 1.5 m square of pale board flooring with proud joints and staggered end butts, so a field of tiles reads as laid boards rather than as one flat plane.
Price tag set (Clothing Rail and Wardrobe)
Blank shop signage in one model: a chrome ticket stand hung with four wordless swing tickets on threads, and a raked card counter sign in an oak foot. Every face is blank, so a project writes its own.
AnimatedGarment steamer (Clothing Rail and Wardrobe)
An upright steamer on a wheeled charcoal foot: a painted boiler with a blank control panel, a clear water tank, a chrome pole with a hanging bar at 1.55 m and a steam head on its hose.
AnimatedFitting room cubicle (Clothing Rail and Wardrobe)
A 1 m by 2.2 m fitting room: two painted side panels and a back panel, a louvred oak door on a real hinge, a mirror, a hook rail, a bench and a chrome head rail carrying six curtain rings.
AnimatedLaundry basket (Clothing Rail and Wardrobe)
A 0.6 m tapered laundry basket with a woven off white banding up the sides, a rolled oak rim and a lipped lid on a hinge along the back edge, for a fitting room, a stock room or a bedroom.