Free models · CC0
Modern
Every modern model below is a self-contained .glb under 25 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
5,421 free GLB models
Oxygen cylinder (Mountaineering and Summit Expedition)
Filament-wound oxygen cylinder with a neck valve, gauge, carry ring and a protective cage.
Climbing helmet (Mountaineering and Summit Expedition)
Hybrid shell climbing helmet with side vents, headlamp clips and an adjustable chin harness.
Twelve-point crampons, pair (Mountaineering and Summit Expedition)
Pair of step-in twelve-point crampons with front points, toe bail, heel lever and retaining straps.
Technical ice tools, pair (Mountaineering and Summit Expedition)
Matched pair of bent-shaft technical tools, one with a hammer and one with an adze, with grip rests.
Coiled climbing rope (Mountaineering and Summit Expedition)
Sixty-metre single rope flaked into a butterfly coil, waist-wrapped and tied off with two tails.
Mountaineering ice axe (Mountaineering and Summit Expedition)
Classic 66 cm walking axe with a curved toothed pick, adze, moulded grip, spike and a wrist leash.
Plastic rescue sled (Mountaineering and Summit Expedition)
Moulded rescue sled with runners, four casualty straps, a head-end bar and a tow bridle on a karabiner.
Route marker wand line (Mountaineering and Summit Expedition)
Six route wands set out over seven metres, each with a flag panel and packed snow at the foot.
Snow bollard (Mountaineering and Summit Expedition)
Horseshoe trench cut in hard snow leaving a load-bearing bollard, with the rope laid in the groove.
Haul bag (Mountaineering and Summit Expedition)
Reinforced cylindrical haul bag with a closure flap, four-point haul suspension and shoulder straps.
Ice screw cluster (Mountaineering and Summit Expedition)
Five tubular ice screws of graded length racked on a karabiner with a sling.
Fixed rope anchor on pickets (Mountaineering and Summit Expedition)
Three T-section snow pickets driven back and equalised to one master point carrying a fixed rope.
Lashed double ladder (Mountaineering and Summit Expedition)
Two ladder sections overlapped and lashed into one 6.8 m span, with hand lines on stakes either side.
Crevasse ladder (Mountaineering and Summit Expedition)
Single 4.2 m aluminium ladder with channel rails and round rungs, whipped at both ends with anchor cord.
Camp table with stools (Mountaineering and Summit Expedition)
Folding alloy camp table with three tripod stools, a vacuum flask and two mugs.
Solar panel and battery box (Mountaineering and Summit Expedition)
Folding solar panel on an adjustable alloy A-frame with a cabled battery box.
Flag line on poles (Mountaineering and Summit Expedition)
Five-metre span of small cloth flags on a sagging line between two guyed poles braced by rock piles.
Stone wind wall (Mountaineering and Summit Expedition)
Curved dry stone wind wall of stacked slabs with coping stones and a drift banked on the lee side.
Supply cache under a tarp (Mountaineering and Summit Expedition)
Barrels under a lashed tarp weighted with rocks, with crates and a duffel stacked alongside.
Latrine tent (Mountaineering and Summit Expedition)
Tall single-pole pyramid latrine tent with a barrel pan and four corner guys.
Single-hoop assault tent (Mountaineering and Summit Expedition)
Minimal single-hoop assault tent that tapers to a low tail, for a summit camp on a small platform.
Kitchen tent (Mountaineering and Summit Expedition)
Smaller ridge kitchen tent with a stove flue through the roof, a roll-up side window and a work shelf.
Mess tent (Mountaineering and Summit Expedition)
Large ridge mess tent on an alloy frame with a walk-in doorway, rolled door flaps and eight guy lines.
Roped glacier team member (Mountaineering and Summit Expedition)
Glacier traveller walking on a taut rope, coils over the shoulder, axe in the uphill hand.