Free models · Game-ready GLB
Interior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
5,216 free GLB models
Kart Storage Rack (Go Kart Track and Pit Lane)
Two tier steel storage rack 1.5 m wide holding two hire chassis, one red and one blue, on runner shelves with edge lips and a red top rail. The stored chassis are simplified to tray, seat, nose and wheels and do not move.
AnimatedPit Garage Bay Module (Go Kart Track and Pit Lane)
One 5 m pit garage bay, 6 m deep and 3.1 m to the roof: half thickness party walls, a back wall with a steel bench, a strip light, a blue header with a bay number plate and a ribbed roller shutter that lifts in its guides.
AnimatedKart on Trolley Stand (Go Kart Track and Pit Lane)
A hire kart sitting on its trolley, wheels clear of the floor, the way a paddock stores and moves one. Trolley castors and kart wheels are all pivoted nodes, so the roll clip turns every wheel on the assembly at once.
Spare Seat and Steering Wheel Rack (Go Kart Track and Pit Lane)
Paddock spares rack 1.6 m wide: two bucket seats hooked over the top rail in red and blue and two steering wheels on pegs below, on a welded steel A frame with a low kick rail. Static geometry, for dressing a garage or a workshop wall.
AnimatedKart Trolley (Go Kart Track and Pit Lane)
Empty steel kart trolley: a two rail deck 0.5 m off the floor on four legs, an end brace each end, a lower shelf rail and a red topped push handle, running on four castors that each turn on their own pivot.
Workshop bin, 0.9 m (Woodworking Workshop and Joinery)
Charcoal workshop bin on a moulded base with a yellow banded rim, a blank waste plate and a part filled load of offcuts and shavings, sized for a bench run or a machine bay.
Safety sign set on a post, 1.7 m (Woodworking Workshop and Joinery)
Free standing safety sign post on a weighted base carrying three signs: a blue mandatory disc for eye and ear protection, a yellow warning triangle and a red prohibition disc, with blank faces and no artwork.
First aid box, 0.36 m (Woodworking Workshop and Joinery)
Green wall mounted first aid box with a raised cream cross, a charcoal catch and a hinged lid, fixed at working height beside the bench run.
Fire extinguisher on a stand, 0.7 m (Woodworking Workshop and Joinery)
Red nine litre extinguisher on a charcoal floor stand: a domed body, a brass valve head with its lever and gauge, a hose and horn clipped to the side and a blank cream label band.
Sawdust collection bag, 0.9 m (Woodworking Workshop and Joinery)
Full collection bag off the extractor: a cream sack on a timber pallet, slumped under its own weight, tied at the neck with a charcoal strap and a blank content label on the side.
Broom and dustpan, 1.4 m (Woodworking Workshop and Joinery)
Shop broom with a charcoal bristle head on a 1.3 m timber handle, standing back against a wall, with a red dustpan and its brush on the floor beside it.
AnimatedWorkshop trolley, 0.9 m (Woodworking Workshop and Joinery)
Three shelf steel trolley on four castors with a push handle, loaded with cut parts, a tin of finish and a clamp, for moving a job between the bench, the machines and the finishing corner.
Drying rack for finished parts, 1.4 m (Woodworking Workshop and Joinery)
Steel drying rack 1.4 m wide and 1.8 m tall: six levels of timber battens carrying finished ply and hardwood parts on edge, so a batch can air off without touching.
Finishing table, 1.2 m (Woodworking Workshop and Joinery)
Grey steel finishing table with a cream turntable top, a part in the middle being oiled, an open tin with its brush, a rag and a stack of finishing pads on the lower shelf, set in the corner a joiner keeps clean.
Offcut bin, 0.9 m (Woodworking Workshop and Joinery)
Timber sided offcut bin on skids, 0.9 m by 0.6 m, filled with short ends and ply strips standing at the angles they were thrown in at, with a stencil plate on the front.
Glue and finish shelving, 0.9 m (Woodworking Workshop and Joinery)
Steel shelving unit 0.9 m wide and 1.5 m tall with three shelves of workshop stock: tins of finish and stain, glue bottles, a jar of brushes, rag rolls and a measuring jug, all with blank labels.
Panelled door on a stand, 2 m (Woodworking Workshop and Joinery)
Finished four panel door 2 m tall in hardwood with raised ply panels, a steel lever handle and two hinges, standing upright in a timber stand with a back brace, the way a finished job waits for collection.
Timber rack with boards, 2.3 m (Woodworking Workshop and Joinery)
Blue cantilever timber rack 2.3 m wide and 2.25 m tall on bolted foot plates, with four pairs of raked arms carrying a full load of sawn hardwood and softwood boards in mixed widths and thicknesses.
Sheet material rack with ply, 2.5 m (Woodworking Workshop and Joinery)
Upright sheet rack 2.5 m wide: a steel base frame with charcoal dividers and a back leaning post, holding five birch ply and MDF sheets on edge with their faces clear of the floor.
Timber rack, part loaded, 2.3 m (Woodworking Workshop and Joinery)
The same cantilever rack after a run of work: the lower arms still carrying boards and the upper arms nearly clear, for a shop that has been using its stock.
Sharpening station, 0.7 m (Woodworking Workshop and Joinery)
Sharpening bench in pine: a charcoal stone pond holding a coarse and a fine waterstone, a leather strop on its block, a honing guide, a water jug and a lower shelf of stone boxes, set at the height a joiner touches up an iron.
Bench plane, 360 mm (Woodworking Workshop and Joinery)
Number five jack plane: a flat steel sole, a blue japanned body, the iron and red lever cap set at the mouth, a timber tote and front knob, sitting on its sole the way it is left on the bench.
Mallet and chisel set on a tray, 0.5 m (Woodworking Workshop and Joinery)
A joiner's mallet standing in a shallow pine tray with three bench chisels laid beside it and a marking gauge: handles, ferrules and ground bevels modelled, for dressing a bench or an assembly table mid job.
Clamp rack with sash clamps, 1.8 m (Woodworking Workshop and Joinery)
Steel A frame clamp rack on castors holding six 1.5 m sash clamps: each clamp is a steel bar with a red head casting, a sliding tail on its pin and a screw with a timber T handle, racked the way a shop keeps them beside the assembly table.