Free models · CC0
Modular
Every model below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,654 free GLB models
Through girder bridge deck (Steam Era Railway and Rolling Stock)
An 8 m riveted through girder bridge carrying the track at normal railhead height.
Sleeper built buffer stop (Steam Era Railway and Rolling Stock)
A sleeper built buffer stop on a 3 m stub of track, with rubbing plates and a target board.
AnimatedLevel crossing with gates (Steam Era Railway and Rolling Stock)
A 4 m level crossing module with a timber road deck, stone approaches and two five bar gates.
Right angle crossing diamond (Steam Era Railway and Rolling Stock)
A flat crossing where two 4 m tracks cross at right angles, with four crossing noses.
Left hand turnout (Steam Era Railway and Rolling Stock)
An 8 m left hand turnout with switch blades, a curved lead, check rails, a crossing vee and a point lever.
Plain track curve 15 degrees (Steam Era Railway and Rolling Stock)
A 15 degree curve on a 15 m radius, 3.88 m along the track centreline.
Plain track straight 4 m (Steam Era Railway and Rolling Stock)
A 4 m plain track module: ballast shoulder, timber sleepers, cast chairs and flat bottom rail.
Kerbside drop-off module (Hover Transit and Antigrav Fleet)
A six metre kerbside module with a raised footway, boarding shelter, bollards, bay markings and lane ports on the road edges.
Hover landing pad tile (Hover Transit and Antigrav Fleet)
A six metre landing pad tile with concentric touchdown rings, a cross marking, edge approach lights and lane ports on all four edges.
Repulsor road plate, lane terminator (Hover Transit and Antigrav Fleet)
The repulsor road plate closed off by a stop block with a warning bar and two lit posts, ending a lane run.
Repulsor road plate, four way (Hover Transit and Antigrav Fleet)
The repulsor road plate as a four way junction with crossing induction arcs and a glowing conflict ring.
Repulsor road plate, quarter turn (Hover Transit and Antigrav Fleet)
The repulsor road plate with its induction arcs swept through a quarter turn, joining a south lane port to an east one.
Repulsor road plate, straight (Hover Transit and Antigrav Fleet)
A six metre square repulsor road plate with twin induction arcs, edge kerb light strips and lane ports on two edges.
Deck Stair and Ramp Module (Arcology Towers and Skyways)
An 8 by 16 m access module that brings the 2.4 m street deck to ground level: a 13 m accessible ramp with double handrails on the west half, an eight-riser stair on the east half, a short deck landing and edge lighting.
Planted Deck Tile (Arcology Towers and Skyways)
The 8 m deck tile with a long planter bed, two trees, three clipped shrubs and two benches: the same footprint, columns and deck ports as the plain plaza tile.
Plaza Deck Tile (Arcology Towers and Skyways)
An 8 m square elevated plaza deck tile: four columns, a slab with a teal fascia band and continuous underside lighting, a paved surface with inlaid panels and an amber inlay ring. Tiles abut on the deck ports at 2.4 m.
Maglev Station Platform Pod (Arcology Towers and Skyways)
A 16 m elevated maglev station module: the through guideway with a side platform each way on alloy brackets, glazed platform screen doors, amber edge strips, a lit canopy on columns, benches, planters and a name band.
Maglev Support Pylon (Arcology Towers and Skyways)
An 11 m elevated maglev support pylon: a tapered square shaft on a paved footing, a Y fork carrying a bearing saddle with teal restraints, and an access ladder. Guideway modules sit directly on the saddle.
Maglev Guideway Switch (Arcology Towers and Skyways)
A 24 m maglev switch module: the through girder plus a diverging branch that settles 5 m to the west and leaves the module parallel to the main line, with a movable amber point blade node, an actuator housing and a status beacon.
Maglev Guideway Quarter Curve (Arcology Towers and Skyways)
A 16 m radius quarter-turn maglev guideway: the standard box girder swept through 90 degrees with a continuous running surface, teal reaction beams and bearing saddles, turning a line from north-south to east-west.
Maglev Guideway Half Straight (Arcology Towers and Skyways)
An 8 m maglev guideway module on the same girder section as the full straight, used to close out a run against a station or a switch.
Transit Escalator Link (Arcology Towers and Skyways)
An 18 m open escalator link that climbs one 8 m tower level: amber tread runs with alloy nosings on a smooth S profile incline, glass balustrades under teal moving handrails, a lit canopy on alloy posts, flat landings at each end and standard bridge portals 8 m apart in height.
Maglev Guideway Straight (Arcology Towers and Skyways)
A 16 m elevated maglev guideway module: a 2.8 m box girder with a paved running surface, teal reaction beams under the flange, amber edge markers, a service light run and three underslung bearing saddles.
Open Trellis Skyway Span (Arcology Towers and Skyways)
A 24 m open-air skyway span on the standard section: a planted walking deck between twelve edge planters, alloy handrails, seven teal trellis arches with longitudinal runners and trained climbing greenery.