Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,478 free GLB models
Depth Gauge Cluster (Submarine Interior and Control Room)
A bulkhead board of three depth and trim gauges in brass bezels, the largest 380 mm across, with four lamps under them on a stiffened back plate 1.04 m wide. The dial faces carry tick marks and a needle and no numerals, so no depth, scale or maker is stated.
Chronometer and Barograph Board (Submarine Interior and Control Room)
A timber instrument board 460 mm wide carrying a chronometer and a gimballed barograph in brass bezels, with a blank builder's plate between them. Both faces are tick marks and a needle only, naming no maker and no reading.
AnimatedElectrical Switchboard (Submarine Interior and Control Room)
A 1.3 by 1.95 m switchboard: twenty four moulded breakers in three rows, two isolator handles that rock on lever-iso-1 and lever-iso-2, a bank of three meters, a bolted blank plate, an amber warning strip and an earthing bar.
Fire Control Console (Submarine Interior and Control Room)
A 1.35 m fire control position: two lit panels over a bank of three dials, ten switches, six solution knobs on the raked desk and a guarded firing key. Every face is abstract, with no scale, plot or marking that names a weapon, a target or a boat.
Radar Repeater (Submarine Interior and Control Room)
A pedestal radar repeater 1.6 m tall: a round screen behind a brass bezel under a raked reading hood, five switches and two brilliance knobs. The screen is a plain lit disc with no trace, sweep or range ring drawn on it.
Sonar Console with Waterfall Display (Submarine Interior and Control Room)
A 1.1 m sonar position: a console with a tall waterfall screen over a bearing strip, nine switches and two tuning knobs on the raked desk, and a headset hook on the cheek.
AnimatedNavigation Chart Table (Submarine Interior and Control Room)
The plot: a 1.6 by 0.9 m chart table with a lit tracing top inside a brass fiddle rail, two chart drawers on drawer-1 and drawer-2, a rack of five rolled charts below, a dividers tray and a plotting light on a jointed arm.
AnimatedWatchkeeper's Stool (Submarine Interior and Control Room)
The same pedestal at standing watch height with a shallow back pad instead of a full one, for a plotter or a sonar operator. The seat swivels about Y on the seat node.
AnimatedPlanesman's Seat (Submarine Interior and Control Room)
A bolted pedestal seat for a watchkeeper at the planes: a deck plate, a clamped column with a foot ring, and a padded pan and raked back on arms. The seat swivels about Y on the seat node.
AnimatedBallast Control Panel (Submarine Interior and Control Room)
The trim and blowing position: a 1.5 by 1.85 m panel with a lit mimic board of plain blocks and links, six indicator lamps, four blowing levers in a quadrant, two 300 mm vent handwheels and a bank of four gauges.
AnimatedHelm Station with Control Yokes (Submarine Interior and Control Room)
The driving position: a 1.7 m console with a raked desk, two aircraft style control yokes on canted columns, a bank of eight dials over a row of eight switches, a small order screen, red and amber order lamps and a foot rail.
AnimatedAttack Periscope Stand (Submarine Interior and Control Room)
The attack periscope housed in its well: a 1.3 m stand with a brass bearing ring graduated in 24 divisions, a capped barrel stub, a boxed hoist frame and a hoist handwheel on the wheel-hoist node. Stands on the deck beside the search periscope.
AnimatedSearch Periscope (Submarine Interior and Control Room)
A 3.1 m search periscope through the deck: a gland and well with a brass training ring, a stepped barrel, an eyepiece housing with a rubber brow and a bearing dial, and an optics head with a window band.
AnimatedHigh Pressure Air Manifold (Submarine Interior and Control Room)
A bulkhead mounted air manifold 1.24 m wide: a flanged 150 mm header on a stiffened back plate, four branch valves with 220 mm handwheels, a drain trap and a bank of four pressure dials over them. Each wheel turns about Z on its own wheel-1 to wheel-4 node.
Cable Run and Junction Box (Submarine Interior and Control Room)
A 2 m hung cable tray carrying four bundles, with two hull hangers and a junction box on the outboard face with a bolted blank cover and four glands. The cable is static: a flexible run is not reachable with one rigid node transform, so it is modelled in the position it hangs in.
AnimatedOverhead Hatch and Ladder (Submarine Interior and Control Room)
The climb out of a compartment: a 2.3 m ladder of two stiles and eight rungs from the deck flat to a 1 m trunk coaming at the hull crown, with a grab rail round it and a dished lid hinged on its after edge.
Sake Bottle and Tokkuri Set (Izakaya Alley and Ramen Shop)
A sake service on a lacquer tray: two 450 mm bottles with foil caps and blank neck bands, a tokkuri flask and two small cups. Every label surface is plain, so the set names no brewery. Origin at the centre of the tray. Static geometry.
Beer Glass Set (Izakaya Alley and Ramen Shop)
Three poured beer glasses with heads on them, an empty tumbler and a stack of paper coasters, as they are left on an izakaya table. Origin at the centre of the group on the table surface. Static geometry with no liquid simulation.
Beer Tap Tower (Izakaya Alley and Ramen Shop)
A two tap beer tower on a stainless drip tray: a 660 mm polished column with a domed cap, two swan neck spouts with timber handles and a blank roundel badge on the front. Sits on a bar top; the handles do not move.
Skewer Grill Counter (Izakaya Alley and Ramen Shop)
A 1.6 m charcoal skewer grill: a dark timber counter with a stainless top, a firebrick lined trough with glowing charcoal, nine skewers resting across the bars, a tray of raw ones and a glass screen. Static; there is no flame, smoke or heat effect.
Standing Bar with Rail (Izakaya Alley and Ramen Shop)
A 2.4 m standing bar at 1.05 m: a timber top with a lip, a slatted dark timber front, a recessed kick, a tubular foot rail and a shelf of eight glasses underneath. Drinkers stand at it; there are no stools. Static geometry.
Floor Cushion (Izakaya Alley and Ramen Shop)
A 560 mm square indigo floor cushion with a piped cream edge and a tuft at each corner, 110 mm thick. Four of them fit round a low table. Static geometry; the origin is at the centre of the footprint.
Low Table (Izakaya Alley and Ramen Shop)
A 1.2 m low izakaya table 330 mm high: a timber top on an apron and four square legs, laid with two bowls, a shared plate and two small cups. Four floor cushions sit round it. Static geometry.
Ice Bucket (Izakaya Alley and Ramen Shop)
A 330 mm stainless ice bucket with a swing handle, heaped with ice and a pair of tongs on the rim, of the kind a counter bar keeps its bottles cold in. Origin at the centre of the base. Static geometry.