Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,478 free GLB models
Mimic Wall Board (Nuclear Power Station and Control Room)
A 4 m mimic board on its own feet: a framed panel with a recessed face, raised flow lines linking abstract plant symbols and a lit lamp at every node, with a blank tag strip along the bottom.
Mimic Wall Board, Narrow (Nuclear Power Station and Control Room)
The mimic board in a 2 m width, for a shorter wall or a single system panel beside the desk.
Analogue Dial Bank (Nuclear Power Station and Control Room)
A 1.1 m instrument panel 2 m tall carrying twelve bezelled analogue dials in a recessed fascia, with three edgewise meter windows below them and a blank tag strip along the bottom.
AnimatedCurved Control Desk (Nuclear Power Station and Control Room)
A three bay control desk on a 2.6 m arc, 4.6 m across the ends: each bay a plinth and carcass with a postformed bench top, a raked switch fascia and an upright instrument head carrying dials, lamp tiles and blank tag strips, with two rocking selector levers on the middle bay.
AnimatedSwitch Panel Console (Nuclear Power Station and Control Room)
A 1.2 m floor standing switch panel 2.1 m tall: a recessed fascia with four rows of toggle switches and indicator lamps, a row of dials across the head, blank tag strips and a hinged back door for the wiring.
AnimatedStrip Chart Recorder (Nuclear Power Station and Control Room)
A 420 mm bench recorder: a painted case on rubber feet with a glazed front, a paper drum turning slowly behind it, a pen carriage across the chart and three lamps and a blank tag on the bottom rail.
AnimatedValve Handwheel Bank (Nuclear Power Station and Control Room)
A manifold stand of six isolating valves between two headers, 2.4 m wide and 2.3 m tall: each valve a bonneted body on a side-mounted stem with a spoked handwheel that turns, with a blank tag strip under every one.
Steam Drum Vessel (Nuclear Power Station and Control Room)
A 2.1 m diameter vertical steam drum 4.4 m tall: a dished top and bottom, lagging straps, a bolted manway on the flank, two flanged crown nozzles, a gauge glass, and an access platform with handrail and ladder.
Shell and Tube Heat Exchanger (Nuclear Power Station and Control Room)
A 4.2 m shell and tube heat exchanger on two concrete saddles: a 1.24 m shell with dished and flanged heads, four flanged nozzles top and bottom, a vent standpipe and a blank rating plate.
AnimatedFeedwater Pump Set (Nuclear Power Station and Control Room)
Two horizontal feed pumps on a shared concrete plinth: each a motor with a guarded coupling driving a volute casing, with a flanged discharge riser, a suction bend and a side-mounted isolating handwheel.
AnimatedTurbine Shaft Line (Nuclear Power Station and Control Room)
A 5.2 m length of shaft line between two bearing pedestals: a 400 mm shaft with coupling flanges at both ends, a barring gear wheel, oil pipework with sight glasses, and the turning gear drive standing beside it.
Condenser (Nuclear Power Station and Control Room)
A 6 m surface condenser: a welded shell on a hotwell, a bolted water box at each end with a flanged circulating water branch, the exhaust neck and its expansion bellows on top, and the air offtake off one corner.
Turbo Generator Set (Nuclear Power Station and Control Room)
A 7 m turbo generator on its plinth: a ribbed stator body with end shields, a terminal box with three bushings, a cooler run down the back, an exciter on the outboard end, and a grating walkway with handrail down the operating side.
Turbine Casing (Nuclear Power Station and Control Room)
A 6.4 m horizontally split turbine casing on its concrete plinth: a tapered barrel with a bolted joint flange down each side, three steam belts, two extraction branches with flanges, and a bearing housing at each end.
Control Rod Stand (Nuclear Power Station and Control Room)
A stand of five spare control rod clusters: 3.4 m absorber fingers hanging from their spiders in a bolted frame with two guide beams, on a footed base plate with a trefoil on the front.
Fuel Assembly on Cradle (Nuclear Power Station and Control Room)
A 4 m square fuel assembly lying on its handling cradle: a thirty six rod bundle with five spacer grids and both end nozzles, strapped across two bolsters on a wheeled frame with a lifting bail at one end.
AnimatedFuel Lifting Flask (Nuclear Power Station and Control Room)
A 1.7 m diameter shielded transfer flask 2.7 m tall: a finned body on a transport base, two lifting trunnions, a machined seal face and a bolted lid hinged at the back, with a trefoil on the flank.
Spent Fuel Storage Rack (Nuclear Power Station and Control Room)
A 1.56 m square storage rack for a fuel pond: thirty six neutron absorbing cells on a 260 mm pitch, 2.4 m deep, on a footed base plate with levelling pads and four lifting eyes.
AnimatedReactor Hall Gantry Crane (Nuclear Power Station and Control Room)
A 12 m span portal crane 9 m to the bridge: braced legs on rail trucks with access ladders, twin box girders with a grating walkway and handrail, and a crab carrying the rope drum and its motor.
AnimatedRefuelling Machine (Nuclear Power Station and Control Room)
A portal refuelling machine on travelling trucks, 8 m between legs and 5.4 m to the bridge: twin girders with a grating walkway and handrail, a traversing trolley and a telescopic mast with a gripper hoist under it, plus an operator platform and ladder on one leg.
AnimatedCrane Hook Block (Nuclear Power Station and Control Room)
A two sheave hook block set down on the floor under its rope: a plate body with side sheaves, a swivel hook with a safety catch and a painted badge on the cheek. The block runs up and down on its own node.
Reactor Vessel Head with Control Rod Drives (Nuclear Power Station and Control Room)
A 5.8 m reactor vessel head: a bolted flange with twenty four nuts, a domed shell, and thirty seven control rod drive mechanisms standing on it in four rings, tied by a seismic support ring, with four lifting lugs and a blank rating plate.
Reactor Cavity Ring (Nuclear Power Station and Control Room)
The concrete cavity the vessel sits in: a 7.2 m stepped pit 1.8 m proud of the floor with a 5 m bore, a machined seal ledge and twenty four hold-down studs round it, edge protection on two sides and a trefoil on the kerb.
AnimatedBlast Door (Nuclear Power Station and Control Room)
A shielded blast door in a rebated steel frame: a 200 mm leaf on three knuckle hinges with a five spoke dogging wheel, four locking lugs down each stile and a trefoil badge at head height. It fits the doorway in the wall panel.